user/sven/linux.git/drivers/input/touchscreen, branch v6.1.151

Input: ilitek_ts_i2c - add report id message validation

2024-10-17T13:21:03Z

[ Upstream commit 208989744a6f01bed86968473312d4e650e600b3 ] Ensure that the touchscreen response has correct "report id" byte before processing the touch data and discard other messages. Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series") Signed-off-by: Emanuele Ghidoli Signed-off-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ilitek_ts_i2c - avoid wrong input subsystem sync

2024-10-17T13:21:03Z

[ Upstream commit 7d0b18cd5dc7429917812963611d961fd93cb44d ] For different reasons i2c transaction may fail or report id in the message may be wrong. Avoid closing the frame in this case as it will result in all contacts being dropped, indicating that nothing is touching the screen anymore, while usually it is not the case. Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series") Signed-off-by: Emanuele Ghidoli Signed-off-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - ratelimit the spi_sync error message

2024-09-18T17:23:02Z

[ Upstream commit ccbfea78adf75d3d9e87aa739dab83254f5333fa ] In case the touch controller is not connected, this message keeps scrolling on the console indefinitelly. Ratelimit it to avoid filling kernel logs. " ads7846 spi2.1: spi_sync --> -22 " Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ili210x - use kvmalloc() to allocate buffer for firmware update

2024-09-12T09:10:20Z

[ Upstream commit 17f5eebf6780eee50f887542e1833fda95f53e4d ] Allocating a contiguous buffer of 64K may fail if memory is sufficiently fragmented, and may cause OOM kill of an unrelated process. However we do not need to have contiguous memory. We also do not need to zero out the buffer since it will be overwritten with firmware data. Switch to using kvmalloc() instead of kzalloc(). Link: https://lore.kernel.org/r/20240609234757.610273-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: silead - Always support 10 fingers

2024-07-25T07:49:10Z

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ] When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers. There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config. Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers. Signed-off-by: Hans de Goede Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com Signed-off-by: Sasha Levin

Input: ili210x - fix ili251x_read_touch_data() return value

2024-07-05T07:31:43Z

[ Upstream commit 9f0fad0382124e7e23b3c730fa78818c22c89c0a ] The caller of this function treats all non-zero values as an error, so the return value of i2c_master_recv() cannot be returned directly. This fixes touch reporting when there are more than 6 active touches. Fixes: ef536abd3afd1 ("Input: ili210x - define and use chip operations structure") Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20240523085624.2295988-1-jkeeping@inmusicbrands.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: imagis - use FIELD_GET where applicable

2024-04-13T11:05:13Z

[ Upstream commit c0ca3dbd03d66c6b9e044f48720e6ab5cef37ae5 ] Instead of manually extracting certain bits from registers with binary ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the *_SHIFT macros can be dropped. Signed-off-by: Duje Mihanović Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-1-2c429afa8420@skole.hr Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

input/touchscreen: imagis: Correct the maximum touch area value

2024-04-13T11:05:12Z

[ Upstream commit 54a62ed17a705ef1ac80ebca2b62136b19243e19 ] As specified in downstream IST3038B driver and proved by testing, the correct maximum reported value of touch area is 16. Signed-off-by: Markuss Broks Signed-off-by: Karel Balej Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

2024-03-01T12:26:26Z

[ Upstream commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8 ] Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen: 1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info. Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K. Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case

2023-10-19T21:08:57Z

commit 423622a90abb243944d1517b9f57db53729e45c4 upstream. Add a special case for gpio_count == 1 && gpio_int_idx == 0 to goodix_add_acpi_gpio_mappings(). It seems that on newer x86/ACPI devices the reset and irq GPIOs are no longer listed as GPIO resources instead there is only 1 GpioInt resource and _PS0 does the whole reset sequence for us. This means that we must call acpi_device_fix_up_power() on these devices to ensure that the chip is reset before we try to use it. This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call acpi_device_fix_up_power() in some cases") by adding a call to acpi_device_fix_up_power() to the generic "Unexpected ACPI resources" catch all. But it turns out that this case on some hw needs some more special handling. Specifically the firmware may bootup with the IRQ pin in output mode. The reset sequence from ACPI _PS0 (executed by acpi_device_fix_up_power()) should put the pin in input mode, but the GPIO subsystem has cached the direction at bootup, causing request_irq() to fail due to gpiochip_lock_as_irq() failure: [ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0 [ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060 [ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8 [ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ [ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio [ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5 Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0 which adds an ACPI GPIO lookup table for the int GPIO even though we cannot use it for reset purposes (as there is no reset GPIO). Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, which will explicitly set the direction to input fixing the issue. Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since there is only 1 GPIO in the ACPI resources the reset entry in that lookup table will amount to a no-op. Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com> Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman