user/sven/linux.git/drivers/input, branch v4.9.147

Input: omap-keypad - fix keyboard debounce configuration

2018-12-21T13:11:37Z

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: elan_i2c - add support for ELAN0621 touchpad

2018-12-08T12:05:07Z

commit bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream. Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR

2018-12-08T12:05:07Z

commit ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream. Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN0620 to the ACPI table

2018-12-08T12:05:07Z

commit 3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream. Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: matrix_keypad - check for errors from of_get_named_gpio()

2018-12-08T12:05:07Z

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff Suggested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: xpad - quirk all PDP Xbox One gamepads

2018-12-08T12:05:07Z

commit a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream. Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: xpad - add support for Xbox1 PDP Camo series gamepad

2018-12-01T08:44:24Z

[ Upstream commit 9735082a7cbae572c2eabdc45acecc8c9fa0759b ] The "Xbox One PDP Wired Controller - Camo series" has a different product-id than the regular PDP controller and the PDP stealth series, but it uses the same initialization sequence. This patch adds the product-id of the camo series to the structures that handle the other PDP Xbox One controllers. Signed-off-by: Ramses Ramírez Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: xpad - fix GPD Win 2 controller name

2018-12-01T08:44:24Z

[ Upstream commit dd6bee81c942c0ea01030da9356026afb88f9d18 ] This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by: Enno Boland Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: xpad - add GPD Win 2 Controller USB IDs

2018-12-01T08:44:24Z

[ Upstream commit c1ba08390a8bb13c927e699330896adc15b78205 ] GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by: Ethan Lee Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: xpad - avoid using __set_bit() for capabilities

2018-12-01T08:44:23Z

[ Upstream commit a01308031c2647ed5f1c845104b73a8820a958a9 ] input_set_capability() and input_set_abs_param() will do it for you. Signed-off-by: Marcus Folkesson Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin