user/sven/linux.git/drivers/input, branch v4.9.5

Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data

2017-01-19T19:18:02Z

commit 1c3415a06b1016a596bfe59e0cfee56c773aa958 upstream. The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[] [] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [] irq_thread_fn+0x20/0x40 [ 2189.435123] [] irq_thread+0x14e/0x222 [ 2189.435135] [] ? __schedule+0x3b3/0x57a [ 2189.435145] [] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [] kthread+0x10e/0x116 [ 2189.435178] [] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [] ret_from_fork+0x7c/0xb0 [ 2189.435199] [] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Pegatron touchpad to noloop table

2017-01-19T19:17:57Z

commit 41c567a5d7d1a986763e58c3394782813c3bcb03 upstream. Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by: Dmitry Torokhov Signed-off-by: Marcos Paulo de Souza Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: xpad - use correct product id for x360w controllers

2017-01-19T19:17:57Z

commit b6fc513da50c5dbc457a8ad6b58b046a6a68fd9d upstream. currently the controllers get the same product id as the wireless receiver. However the controllers actually have their own product id. The patch makes the driver expose the same product id as the windows driver. This improves compatibility when running applications with WINE. see https://github.com/paroj/xpad/issues/54 Signed-off-by: Pavel Rojtberg Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - unlock on error

2017-01-12T10:39:26Z

commit 792f497b22afd0563b94dd8fa129a05f762a2c25 upstream. We should unlock before returning on this error path. Fixes: 3a762dbd5347 ('[media] Input: synaptics-rmi4 - add support for F54 diagnostics') Signed-off-by: Dan Carpenter Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: drv260x - fix input device's parent assignment

2017-01-09T07:32:24Z

commit 5a8a6b89c15766446d845671d574a9243b6d8786 upstream. We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by: Jingkui Wang Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2016-12-01T18:29:41Z

Pull input fixes from Dmitry Torokhov: "We are disabling automatic probing of BYD touchpads as it results in too many false positives, and the hardware is not terribly popular and having the protocol support does not result in significantly improved user experience. We also change keycode for KEY_DATA to avoid clashing with KEY_FASTREVERSE. Luckily this newish code is used by CEC framework that is still in staging, so it is extremely unlikely that someone has already started using this keycode" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: change KEY_DATA from 0x275 to 0x277 Input: psmouse - disable automatic probing of BYD touchpads

Input: psmouse - disable automatic probing of BYD touchpads

2016-11-17T01:25:31Z

BYD automatic protocol detection is extremely unreliable and is often triggers false positives on regular mice, Sentelic touchpads, and other devices. BYD has several documents that have recommended detection sequence, but they conflict with each other and, as far as I can see, still would not produce unique enough output to reliably differentiate BYD from other PS/2 devices. OEMs sourcing BYD devices also do not do us any favors by not supplying any reasonable DMI data and instead leaving turds like "To Be Filled By O.E.M." in place of vendor data, or "System Serial Number" as serial number. On top of that BYD is not truly modern multitouch controller, but rather a single-touch transitional device that only reports absolute coordinates at the beginning of finger contact and then reverts to reporting displacements, and thus not very precise; the only benefit from using BYD mode vs the legacy PS/2 mode is possibility of edge scrolling. Given the above, and the fact that BYD devices are somewhat uncommon, let's disable automatic detection of BYD devices. Users who know they have BYD trackpads or want to experiment can attempt to activate BYD protocol via sysfs: echo -n "byd" > /sys/bus/serio/devices/serio1/drvctl Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=151691 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=175421 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=120781 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=121281 Fixes: 98ee37714493 ("Input: byd - add BYD PS/2 touchpad driver") Cc: stable@vger.kernel.org # 4.6+ Reviewed-by: Pali Rohár Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2016-11-05T18:26:11Z

Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - cleanup Focaltech code Input: i8042 - add XMG C504 to keyboard reset table

Input: psmouse - cleanup Focaltech code

2016-10-25T00:19:25Z

psmouse->name "Focaltech Touchpad" is an overkill. In xinput it is too long as "FocaltechPS/2 Focaltech Focaltech Touchpad" In focaltech_report_state() pointer to psmouse->dev is already stored as *dev Signed-off-by: Dmitry Tunin Signed-off-by: Dmitry Torokhov

Input: i8042 - add XMG C504 to keyboard reset table

2016-10-19T19:10:04Z

The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by: Patrick Scheuring Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov