user/sven/linux.git/drivers/input, branch v4.9.53

Input: i8042 - add Gigabyte P57 to the keyboard reset table

2017-09-27T12:39:19Z

commit 697c5d8a36768b36729533fb44622b35d56d6ad0 upstream. Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: trackpoint - assume 3 buttons when buttons detection fails

2017-09-09T15:39:39Z

commit 293b915fd9bebf33cdc906516fb28d54649a25ac upstream. Trackpoint buttons detection fails on ThinkPad 570 and 470 series, this makes the middle button of the trackpoint to not being recogized. As I don't believe there is any trackpoint with less than 3 buttons this patch just assumes three buttons when the extended button information read fails. Signed-off-by: Oscar Campos Acked-by: Peter Hutterer Signed-off-by: Dmitry Torokhov Signed-off-by: Aaron Ma Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad

2017-08-30T08:21:44Z

commit 4a646580f793d19717f7e034c8d473b509c27d49 upstream. Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by: Masaki Ota Tested-by: Takashi Iwai Tested-by: Paul Donohue Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310

2017-08-30T08:21:44Z

commit 1d2226e45040ed4aee95b633cbd64702bf7fc2a1 upstream. Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by: KT Liao Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: trackpoint - add new trackpoint firmware ID

2017-08-30T08:21:44Z

commit ec667683c532c93fb41e100e5d61a518971060e2 upstream. Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by: Aaron Ma Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB

2017-08-25T00:12:19Z

commit 76988690402dde2880bfe06ecccf381d48ba8e1c upstream. Add 2 new IDs (ELAN0609 and ELAN060B) to the list of ACPI IDs that should be handled by the driver. Signed-off-by: KT Liao Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - add ELAN0608 to the ACPI table

2017-08-25T00:12:19Z

commit 1874064eed0502bd9bef7be8023757b0c4f26883 upstream. Similar to commit 722c5ac708b4f ("Input: elan_i2c - add ELAN0605 to the ACPI table"), ELAN0608 should be handled by elan_i2c. This touchpad can be found in Lenovo ideapad 320-14IKB. BugLink: https://bugs.launchpad.net/bugs/1708852 Signed-off-by: Kai-Heng Feng Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: i8042 - fix crash at boot time

2017-07-27T22:08:05Z

commit 340d394a789518018f834ff70f7534fc463d3226 upstream. The driver checks port->exists twice in i8042_interrupt(), first when trying to assign temporary "serio" variable, and second time when deciding whether it should call serio_interrupt(). The value of port->exists may change between the 2 checks, and we may end up calling serio_interrupt() with a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [] _spin_lock_irqsave+0x1f/0x40 PGD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:[] [] _spin_lock_irqsave+0x1f/0x40 RSP: 0018:ffff880028203cc0 EFLAGS: 00010082 RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050 RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0 R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098 FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500) Stack: ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000098 ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac Call Trace: [] serio_interrupt+0x36/0xa0 [] i8042_interrupt+0x132/0x3a0 [] ? kvm_clock_read+0x1c/0x20 [] ? kvm_clock_get_cycles+0x9/0x10 [] handle_IRQ_event+0x60/0x170 [] ? kvm_guest_apic_eoi_write+0x44/0x50 [] handle_edge_irq+0xde/0x180 [] handle_irq+0x49/0xa0 [] do_IRQ+0x6c/0xf0 [] ret_from_intr+0x0/0x11 [] ? __do_softirq+0x73/0x1e0 [] ? hrtimer_interrupt+0x14b/0x260 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x65/0xa0 [] ? irq_exit+0x85/0x90 [] ? smp_apic_timer_interrupt+0x70/0x9b [] ? apic_timer_interrupt+0x13/0x20 To avoid the issue let's change the second check to test whether serio is NULL or not. Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of trying to be overly smart and using memory barriers. Signed-off-by: Chen Hong [dtor: take lock in i8042_start()/i8042_stop()] Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

2017-06-29T11:00:29Z

commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 upstream. Without this quirk, the touchpad is not responsive on this product, with the following message repeated in the logs: psmouse serio1: bad data from KBC - timeout Add it to the notimeout list alongside other similar Fujitsu laptops. Signed-off-by: Daniel Drake Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled

2017-06-14T13:06:00Z

commit 47eb0c8b4d9eb6368941c6a9bb443f00847a46d7 upstream. The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by: Ulrik De Bie Reviewed-by: Arjan Opmeer Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman