user/sven/linux.git/drivers/input, branch v6.7.9

Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table

2024-03-01T12:41:39Z

[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ] Another Fujitsu-related patch. In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:3092) not working at all. So this notebook uses a hid-over-i2c touchpad which is managed by the i2c_designware input driver. Since you can't find a PS/2 mouse port on this computer and you can't connect a PS/2 mouse to it even with an official port replicator I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: xpad - add Lenovo Legion Go controllers

2024-03-01T12:41:37Z

[ Upstream commit 80441f76ee67002437db61f3b317ed80cce085d2 ] The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

2024-03-01T12:41:36Z

[ Upstream commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8 ] Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen: 1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info. Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K. Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID

2024-02-16T18:14:29Z

commit 683cd8259a9b883a51973511f860976db2550a6e upstream. After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models has stopped working after a suspend/resume. The problem appears to be that atkbd_probe() fails when called from atkbd_reconnect() on resume, which on systems where ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was skipped is weird, but apparently that is what is happening. Fix this by also skipping ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU

2024-02-16T18:14:29Z

commit a60e6c3918d20848906ffcdfcf72ca6a8cfbcf2e upstream. When closing the laptop lid with an external screen connected, the mouse pointer has a constant movement to the lower right corner. Opening the lid again stops this movement, but after that the touchpad does no longer register clicks. The touchpad is connected both via i2c-hid and PS/2, the predecessor of this device (NS70MU) has the same layout in this regard and also strange behaviour caused by the psmouse and the i2c-hid driver fighting over touchpad control. This fix is reusing the same workaround by just disabling the PS/2 aux port, that is only used by the touchpad, to give the i2c-hid driver the lone control over the touchpad. v2: Rebased on current master Signed-off-by: Werner Sembach Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atkbd - use ab83 as id when skipping the getid command

2024-01-25T23:45:09Z

commit 58f65f9db7e0de366a5a115c2e2c0703858bba69 upstream. Barnabás reported that the change to skip the getid command when the controller is in translated mode on laptops caused the Version field of his "AT Translated Set 2 keyboard" input device to change from ab83 to abba, breaking a custom hwdb entry for this keyboard. Use the standard ab83 id for keyboards when getid is skipped (rather then that getid fails) to avoid reporting a different Version to userspace then before skipping the getid. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Barnabás Pőcze Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/ Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge tag 'input-for-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2023-12-23T19:16:58Z

Pull input updates from Dmitry Torokhov: - a quirk to AT keyboard driver to skip issuing "GET ID" command when 8042 is in translated mode and the device is a laptop/portable, because the "GET ID" command makes a bunch of recent laptops unhappy - a quirk to i8042 to disable multiplexed mode on Acer P459-G2-M which causes issues on resume - psmouse will activate native RMI4 protocol support for touchpad on ThinkPad L14 G1 - addition of Razer Wolverine V2 ID to xpad gamepad driver - mapping for airplane mode button in soc_button_array driver for TUXEDO laptops - improved error handling in ipaq-micro-keys driver - amimouse being prepared for platform remove callback returning void * tag 'input-for-v6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - add mapping for airplane mode button Input: xpad - add Razer Wolverine V2 support Input: ipaq-micro-keys - add error handling for devm_kmemdup Input: amimouse - convert to platform remove callback returning void Input: i8042 - add nomux quirk for Acer P459-G2-M Input: atkbd - skip ATKBD_CMD_GETID in translated mode Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

Input: soc_button_array - add mapping for airplane mode button

2023-12-23T07:34:06Z

This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3. While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id 0xc6 (Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but since neither 0xc6 nor 0xc8 are currently implemented at all in soc_button_array this not to standard behaviour is not put behind a quirk for the moment. Signed-off-by: Christoffer Sandberg Signed-off-by: Werner Sembach Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: xpad - add Razer Wolverine V2 support

2023-12-13T03:24:02Z

Add the VID and PID of Razer Wolverine V2 to xpad_device. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz Signed-off-by: Dmitry Torokhov

Input: ipaq-micro-keys - add error handling for devm_kmemdup

2023-12-03T19:04:34Z

Check the return value of i2c_add_adapter. Static analysis revealed that the function did not properly handle potential failures of i2c_add_adapter, which could lead to partial initialization of the I2C adapter and unstable operation. Signed-off-by: Haoran Liu Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx") Signed-off-by: Dmitry Torokhov