user/sven/linux.git/drivers/interconnect, branch v5.9.11

interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM

2020-11-05T10:51:12Z

[ Upstream commit 5be1805dc3961ce0465bcb0beab85fe8580af08d ] After enabling interconnect scaling for display on the db845c board, in certain configurations the board hangs, while the following errors are observed on the console: Error sending AMC RPMH requests (-110) qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000 ... In this specific case, the above is related to one of the sequencers being stuck, while client drivers are returning from probe and trying to disable the currently unused clock and interconnect resources. Generally we want to keep the multimedia NoC enabled like the rest of the NoCs, so let's set the keepalive flag on it too. Fixes: aae57773fbe0 ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs") Reported-by: Amit Pundir Reviewed-by: Mike Tipton Tested-by: John Stultz Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: Fix small BW votes being truncated to zero

2020-09-03T21:07:12Z

Small BW votes that translate to less than a single BCM unit are currently truncated to zero. Ensure that non-zero BW requests always result in at least a vote of 1 to BCM. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov

interconnect: Show bandwidth for disabled paths as zero in debugfs

2020-09-03T07:34:37Z

For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke Reviewed-by: Evan Green Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov

Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-08-05T18:43:47Z

Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...

Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-08-04T02:30:59Z

Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...

Merge 5.8-rc7 into char-misc-next

2020-07-27T09:49:37Z

This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

interconnect: msm8916: Fix buswidth of pcnoc_s nodes

2020-07-23T08:45:24Z

The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it. Reported-by: Jun Nie Reviewed-by: Mike Tipton Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov Cc: stable Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman

interconnect: Do not skip aggregation for disabled paths

2020-07-23T08:45:24Z

When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar Tested-by: Atul Dhudase Reviewed-by: Atul Dhudase Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman

soc: qcom: rpmh: Update rpmh_invalidate function to return void

2020-06-22T21:23:46Z

Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer Reviewed-by: Stephen Boyd Suggested-by: Stephen Boyd Signed-off-by: Maulik Shah Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson

interconnect: Allow inter-provider pairs to be configured

2020-06-16T13:38:43Z

This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń Signed-off-by: Sylwester Nawrocki Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov