user/sven/linux.git/drivers/leds/Makefile, branch v5.2.5

Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged

2019-05-14T07:09:23Z

Immutable branch between MFD, ARM and Net due for the 5.2 merge window

leds: max77650: Add LEDs support

2019-05-08T11:07:02Z

This adds basic support for LEDs for the max77650 PMIC. The device has three current sinks for driving LEDs. Signed-off-by: Bartosz Golaszewski Acked-by: Jacek Anaszewski Acked-by: Pavel Machek Signed-off-by: Lee Jones

leds: lm3532: Introduce the lm3532 LED driver

2019-04-07T18:45:49Z

Introduce the Texas Instruments LM3532 White LED driver. The driver supports ALS configurability or manual brightness control. The driver also supports associating LED strings with specific control banks in a group or as individually controlled strings. Signed-off-by: Dan Murphy Tested-by: Tony Lindgren Signed-off-by: Jacek Anaszewski

leds: add Panasonic AN30259A support

2018-09-10T19:31:11Z

AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

leds: lm3601x: Introduce the lm3601x LED driver

2018-05-23T19:44:47Z

Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy Reviewed-by: Andy Shevchenko Signed-off-by: Jacek Anaszewski

leds: Add Spreadtrum SC27xx breathing light controller driver

2018-05-14T20:18:34Z

This patch adds Spreadtrum SC27xx PMIC series breathing light controller driver, which can support 3 LEDs. Each LED can work at normal PWM mode and breathing mode. Signed-off-by: Xiaotong Lu Signed-off-by: Baolin Wang Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

leds: add LED driver for CR0014114 board

2018-04-16T18:16:24Z

This patch adds a LED class driver for the RGB LEDs found on the Crane Merchandising System CR0014114 LEDs board. Signed-off-by: Oleh Kravchenko Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform

2018-02-19T20:09:20Z

Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

leds: lm3692x: Introduce LM3692x dual string driver

2018-01-08T20:28:11Z

Introducing the LM3692x Dual-String white LED driver. Data sheet is located http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf Signed-off-by: Dan Murphy Signed-off-by: Jacek Anaszewski

Merge tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

2017-11-15T02:09:31Z

Pull LED updates from Jacek Anaszewski: "New LED class driver: - add a driver for PC Engines APU/APU2 LEDs New LED trigger: - add a system activity LED trigger LED core improvements: - replace flags bit shift with BIT() macros Convert timers to use timer_setup() in: - led-core - ledtrig-activity - ledtrig-heartbeat - ledtrig-transient LED class drivers fixes: - lp55xx: fix spelling mistake: 'cound' -> 'could' - tca6507: Remove unnecessary reg check - pca955x: Don't invert requested value in pca955x_gpio_set_value() LED documentation improvements: - update 00-INDEX file" * tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Add driver for PC Engines APU/APU2 LEDs leds: lp55xx: fix spelling mistake: 'cound' -> 'could' leds: Convert timers to use timer_setup() Documentation: leds: Update 00-INDEX file leds: tca6507: Remove unnecessary reg check leds: ledtrig-heartbeat: Convert timers to use timer_setup() leds: Replace flags bit shift with BIT() macros leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() leds: ledtrig-activity: Add a system activity LED trigger