user/sven/linux.git/drivers/leds/trigger, branch v4.14.270

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

2017-07-06T18:32:40Z

Pull LED updates from Jacek Anaszewski: "This time we're removing more than adding: Removed drivers: leds-versatile: - all users of the Versatile LED driver are deleted and replaced with the very generic leds-syscon leds-sead3: - SEAD3 is using the generic leds-syscon & regmap based register-bit-led driver LED class drivers improvements: ledtrig-gpio: - use threaded IRQ, which both simplifies the code because we can drop the workqueue indirection, and it enables using the trigger for GPIOs that work with threaded IRQs themselves - refresh LED state after GPIO change since the new GPIO may have a different state than the old one leds-lp55xx: - make various arrays static const leds-pca963x: - add bindings to invert polarity" * tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp55xx: make various arrays static const leds: Remove SEAD-3 driver leds: trigger: gpio: Use threaded IRQ leds: trigger: gpio: Refresh LED state after GPIO change leds: Delete obsolete Versatile driver leds: pca963x: Add bindings to invert polarity

Revert "leds: handle suspend/resume in heartbeat trigger"

2017-06-13T18:37:01Z

This reverts commit 5ab92a7cb82c66bf30685583a38a18538e3807db. System cannot enter suspend mode because of heartbeat led trigger. In autosleep_wq, try_to_suspend function will try to enter suspend mode in specific period. it will get wakeup_count then call pm_notifier chain callback function and freeze processes. Heartbeat_pm_notifier is called and it call led_trigger_unregister to change the trigger of led device to none. It will send uevent message and the wakeup source count changed. As wakeup_count changed, suspend will abort. Fixes: 5ab92a7cb82c ("leds: handle suspend/resume in heartbeat trigger") Signed-off-by: Zhang Bo Acked-by: Pavel Machek Reviewed-by: Linus Walleij Signed-off-by: Jacek Anaszewski

leds: trigger: gpio: Use threaded IRQ

2017-05-29T19:55:58Z

This both simplifies the code because we can drop the workqueue indirection, and it enables using the trigger for GPIOs that work with threaded IRQs themselves. Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Signed-off-by: Jacek Anaszewski

leds: trigger: gpio: Refresh LED state after GPIO change

2017-05-29T19:55:04Z

The new GPIO may have a different state than the old one. Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Signed-off-by: Jacek Anaszewski

leds/trigger/cpu: Add LED trigger for all CPUs aggregated

2017-03-06T21:06:47Z

Currently there is one CPU led trigger per cpu ('cpu0', 'cpu1', ...) This patch adds a new trigger, 'cpu', with brightness proportional to the number of active CPUs. If multiple brightness levels aren't supported on the LED, it effectively indicates if there is any CPU active. This is particularly useful on tiny linux boards with more CPU cores than LED pins. Signed-off-by: Paulo Costa Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:27Z

We are going to split out of , which will have to be picked up from a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

leds: ledtrig-heartbeat: Make top brightness adjustable

2017-02-14T21:20:24Z

LED class heartbeat trigger allowed only for blinking with max_brightness value. This patch adds more flexibility by exploiting part of LED core software blink infrastructure. Signed-off-by: Jacek Anaszewski Acked-by: Pavel Machek Reviewed-by: Hans de Goede

cpu/hotplug: Cleanup state names

2016-12-25T09:47:44Z

When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Siewior Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner

ledtrig-cpu.c: fix english

2016-11-22T11:07:03Z

Fix english spelling. Signed-off-by: Pavel Machek Signed-off-by: Jacek Anaszewski