user/sven/linux.git/drivers/leds, branch v3.18.78

leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger

2015-07-04T03:02:15Z

[ Upstream commit 084609bf727981c7a2e6e69aefe0052c9d793300 ] Setting a dev_pm_ops suspend/resume pair of callbacks but not a set of hibernation callbacks means those pm functions will not be called upon hibernation - that leads to system crash on ARM during freezing if gpio-led is used in combination with CPU led trigger. It may happen after freeze_noirq stage (GPIO is suspended) and before syscore_suspend stage (CPU led trigger is suspended) - usually when disable_nonboot_cpus() is called. Log: PM: noirq freeze of devices complete after 1.425 msecs Disabling non-boot CPUs ... ^ system may crash or stuck here with message (TI AM572x) WARNING: CPU: 0 PID: 3100 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x22c/0x370() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in Supervisor mode during Functional access CPU1: shutdown ^ or here Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the suspend and hibernation callbacks and move led_suspend/led_resume under CONFIG_PM_SLEEP to avoid build warnings. Fixes: 73e1ab41a80d (leds: Convert led class driver from legacy pm ops to dev_pm_ops) Signed-off-by: Grygorii Strashko Acked-by: Jacek Anaszewski Cc: 3.11+ # 3.11+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

leds: netxbig: fix oops at probe time

2015-01-27T16:29:40Z

commit 0c86ac2c50647451d6a70dc900f8bb0ee3d485d9 upstream. This patch fixes a NULL pointer dereference on led_dat->mode_val. Due to this bug, a kernel oops can be observed at probe time on the LaCie 2Big and 5Big v2 boards: Unable to handle kernel NULL pointer dereference at virtual address 00000008 [...] [] (netxbig_led_probe) from [] (platform_drv_probe+0x4c/0x9c) [] (platform_drv_probe) from [] (driver_probe_device+0x98/0x25c) [] (driver_probe_device) from [] (__driver_attach+0x8c/0x90) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x94) [] (bus_for_each_dev) from [] (bus_add_driver+0x124/0x1dc) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x80/0x1cc) [] (do_one_initcall) from [] (kernel_init_freeable+0xe4/0x1b4) [] (kernel_init_freeable) from [] (kernel_init+0xc/0xec) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) [...] This bug was introduced by commit 588a6a99286ae30afb1339d8bc2163517b1b7dd1 ("leds: netxbig: fix attribute-creation race"). Signed-off-by: Simon Guinot Acked-by: Johan Hovold Signed-off-by: Bryan Wu Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

2014-10-21T15:18:38Z

Pull LED update from Bryan Wu: "Basically we have some bug fixing and clean up and one big thing is we start to merge patch to add support LED Flash class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: gpio: cleanup the leds-gpio driver led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error. led: gpio: Sort include headers alphabetically leds: Improve and export led_update_brightness leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor function may sleep leds: lp3944: fix sparse warning leds: avoid using DEVICE_ATTR macro for max_brightness attribute leds: make brightness type consistent across whole subsystem leds: Reorder include directives

Merge tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2014-10-10T20:40:14Z

Pull hwmon updates from Guenter Roeck: - new driver for menf21bmc. - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API. - register ntc_thermistor driver with thermal subsystem. - add support for F15h M60h to k10temp driver. - add driver for MEN14F021P00 BMC HWMON driver; this required a merge with tag mfd-hwmon-leds-watchdog-v3.18 * tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ab8500) Call kernel_power_off instead of pm_power_off hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor. hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups MAINTAINERS: add entry for the PWM fan driver hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups hwmon: (k10temp) Add support for F15h M60h hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups hwmon: (ads1015) Use of_property_read_u32 at appropriate places

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2014-10-09T18:58:15Z

Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-10-08T21:37:16Z

Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-10-08T21:03:09Z

Pull ARM SoC non-critical bug fixes from Arnd Bergmann: "These are bug fixes for harmless problems that were not important enough to get fixed in 3.17. The majority of these are OMAP specific, but there are also a couple for Marvell mvebu, cns3xxx, and others, as well as some updates for the MAINTAINERS file. In particular, Robert Jarzmik and Daniel Mack now volunteered to help out maintaining the PXA platform, Krzysztof Halasa took over the cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic meson platform, and Matthias Brugger is now listed for the mediatek platform he recently contributed" * tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: update Shawn's email address MAINTAINERS: condense some Tegra related entries MAINTAINERS: add Alexandre Courbot for Tegra MAINTAINERS: CNS3xxx and IXP4xx update. MAINTAINERS: Add maintainers entry for Mediatek SoCs arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500 MAINTAINERS: add a third maintainer to mach-bcm CNS3xxx: Fix PCIe read size limit. CNS3xxx: Fix logical PCIe topology. CNS3xxx: Fix debug UART. MAINTAINERS: Add entry for the Amlogic MesonX SoCs MAINTAINERS: update ARM pxa maintainers ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings ARM: mvebu: Netgear RN102: Use Hardware BCH ECC ARM: Kirkwood: Fix DT based DSA. ARM: OMAP2+: make of_device_ids const ARM: omap2: make arrays containing machine compatible strings const ARM: LPC32xx: Fix reset function ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC ...

leds: gpio: cleanup the leds-gpio driver

2014-09-29T17:22:26Z

Remove stray blank line and space. Signed-off-by: Xiubo Li Signed-off-by: Bryan Wu

led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error.

2014-09-29T17:21:01Z

Since we cannot make sure the 'pdata->num_leds' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by: Xiubo Li Signed-off-by: Bryan Wu

led: gpio: Sort include headers alphabetically

2014-09-29T17:18:28Z

If the inlcude headers aren't sorted alphabetically, then the logical choice is to append new ones, however that creates a lot of potential for conflicts or duplicates because every change will then add new includes in the same location. Signed-off-by: Xiubo Li Signed-off-by: Bryan Wu