user/sven/linux.git/drivers/mailbox, branch v4.14

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'mailbox-v4.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration

2017-09-07T20:23:37Z

Pull mailbox updates from Jassi Brar: "Just behavorial changes to a controller driver: the Broadcom's Flexrm mailbox driver has been modifified to support debugfs and TX-Done mechanism by ACK. Nothing for the core mailbox stack" * tag 'mailbox-v4.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: bcm-flexrm-mailbox: Use txdone_ack instead of txdone_poll mailbox: bcm-flexrm-mailbox: Use bitmap instead of IDA mailbox: bcm-flexrm-mailbox: Fix mask used in CMPL_START_ADDR_VALUE() mailbox: bcm-flexrm-mailbox: Add debugfs support mailbox: bcm-flexrm-mailbox: Set IRQ affinity hint for FlexRM ring IRQs

mailbox: bcm-flexrm-mailbox: Use txdone_ack instead of txdone_poll

2017-08-31T03:09:04Z

Currently, FlexRM driver uses txdone_poll method of Linux Mailbox to model the send_data() callback. To achieve this, we have introduced "last_pending_msg" pointer for each FlexRM ring which keeps track of the message that did not fit in the FlexRM ring. This patch updates FlexRM driver to use txdone_ack method instead of txdone_poll method because txdone_poll is not efficient for FlexRM and requires additional tracking in FlexRM driver. Also, moving to txdone_ack method helps us remove "last_pending_msg" pointer and last_tx_done() callback. Signed-off-by: Anup Patel Reviewed-by: Ray Jui Signed-off-by: Jassi Brar

mailbox: bcm-flexrm-mailbox: Use bitmap instead of IDA

2017-08-31T03:09:03Z

Currently, we are using IDA library for managing IDs on a FlexRM ring. The IDA library dynamically allocates memory for underlying data structures which can cause potential locking issue when allocating/free IDs from flexrm_new_request() and flexrm_process_completions(). To tackle this, we replace use of IDA with bitmap for each FlexRM ring and also protect the bitmap with FlexRM ring lock. Signed-off-by: Anup Patel Signed-off-by: Jassi Brar

mailbox: bcm-flexrm-mailbox: Fix mask used in CMPL_START_ADDR_VALUE()

2017-08-31T03:09:00Z

The mask used in CMPL_START_ADDR_VALUE() should be 27bits instead of 26bits. This incorrect mask was causing completion writes to 40bits physical address fail. This patch fixes mask used in CMPL_START_ADDR_VALUE() macro. Fixes: dbc049eee730 ("mailbox: Add driver for Broadcom FlexRM ring manager") Signed-off-by: Anup Patel Reviewed-by: Ray Jui Reviewed-by: Scott Branden Cc: stable@vger.kernel.org Signed-off-by: Jassi Brar

mailbox: bcm-flexrm-mailbox: Add debugfs support

2017-08-31T03:08:59Z

This patch adds debugfs support to Broadcom FlexRM driver so that we can see FlexRM ring state when any issue happens. Signed-off-by: Anup Patel Reviewed-by: Vikram Prakash Reviewed-by: Scott Branden Signed-off-by: Jassi Brar

mailbox: bcm-flexrm-mailbox: Set IRQ affinity hint for FlexRM ring IRQs

2017-08-31T03:08:44Z

This patch set IRQ affinity hint for FlexRM ring IRQ at time of enabling ring (i.e. flexrm_startup()). The IRQ affinity hint will allow FlexRM driver to distribute FlexRM ring IRQs across online CPUs so that all FlexRM ring IRQs don't land in CPU0 by default. Signed-off-by: Anup Patel Reviewed-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Jassi Brar

mailbox: pcc: Drop uninformative output during boot

2017-08-09T23:33:01Z

When booting on an ACPI enabled system that does not provide the Platform Communications Channel Table (PCCT), the pcc mailbox driver prints - [ 0.484261] PCCT header not found. during probe before returning -ENODEV. This message clutters the bootlog and doesn't provide any useful information. Drop this message. Signed-off-by: Punit Agrawal Acked-by: Alexey Klimov Signed-off-by: Rafael J. Wysocki

mailbox: pcc: Fix crash when request PCC channel 0

2017-07-26T00:11:47Z

When PCCT is not available, kernel crashes as below when requests PCC channel 0. This patch fixes this issue. [ 0.920454] PCCT header not found. ... [ 8.031309] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 8.031310] [0000000000000010] user address but active_mm is swapper [ 8.031312] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.031313] Modules linked in: [ 8.031316] CPU: 31 PID: 1 Comm: swapper/0 Tainted: G W 4.13.0-rc1 #18 [ 8.031317] Hardware name: AppliedMicro(R) 07/20/2017 [ 8.031318] task: ffff809ef3b08000 task.stack: ffff809ef3b10000 [ 8.031322] PC is at pcc_mbox_request_channel+0x8c/0x160 [ 8.031325] LR is at xgene_slimpro_i2c_probe+0x1c0/0x378 [ 8.031326] pc : [] lr : [] pstate: 00000045 [ 8.031327] sp : ffff809ef3b13bd0 [ 8.031327] x29: ffff809ef3b13bd0 x28: ffff000008ed90a0 [ 8.031329] x27: ffff000009091000 x26: ffff000008e50470 [ 8.031330] x25: ffff000008ed9100 x24: ffff809eefd9ac30 [ 8.031332] x23: 0000000000000000 x22: ffff0000090e3e10 [ 8.031333] x21: ffff0000090e3000 x20: 0000000000000000 [ 8.031335] x19: 0000000000000000 x18: 0000000000087ffc [ 8.031336] x17: 2fe48d76a78303f0 x16: 0000000000087ffc [ 8.031337] x15: ffff000000000000 x14: 0000000000000000 [ 8.031339] x13: 0000000000000000 x12: 0000000000000018 [ 8.031340] x11: 0000000000000018 x10: 0101010101010101 [ 8.031342] x9 : 0000000000000000 x8 : 7f7f7f7f7f7f7f7f [ 8.031343] x7 : fefefefeff6b646d x6 : 0000008080808080 [ 8.031345] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.031346] x3 : 0000000000000000 x2 : ffff000008819b64 [ 8.031348] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 8.031393] Call trace: [ 8.031394] Exception stack(0xffff809ef3b13a00 to 0xffff809ef3b13b30) [ 8.031395] 3a00: 0000000000000000 0001000000000000 ffff809ef3b13bd0 ffff000008899450 [ 8.031397] 3a20: ffff809f7e1f9a10 ffff000008f60be0 0000000000000001 ffff809ef3b13b7c [ 8.031398] 3a40: ffff809f7e1f9a10 0000000000000000 ffff000009091000 0000000000000003 [ 8.031399] 3a60: ffff000009091000 0000000000000003 ffff809ef3b13a80 ffff0000084e0794 [ 8.031400] 3a80: ffff809ef3b13a90 ffff00000850bb64 ffff809ef3b13ad0 ffff00000850bf34 [ 8.031402] 3aa0: 0000000000000000 0000000000000000 ffff000008819b64 0000000000000000 [ 8.031403] 3ac0: 0000000000000001 0000000000000000 0000008080808080 fefefefeff6b646d [ 8.031404] 3ae0: 7f7f7f7f7f7f7f7f 0000000000000000 0101010101010101 0000000000000018 [ 8.031405] 3b00: 0000000000000018 0000000000000000 0000000000000000 ffff000000000000 [ 8.031406] 3b20: 0000000000087ffc 2fe48d76a78303f0 [ 8.031409] [] pcc_mbox_request_channel+0x8c/0x160 [ 8.031410] [] xgene_slimpro_i2c_probe+0x1c0/0x378 [ 8.031413] [] platform_drv_probe+0x50/0xbc [ 8.031414] [] driver_probe_device+0x21c/0x2d0 [ 8.031416] [] __driver_attach+0xac/0xb0 [ 8.031417] [] bus_for_each_dev+0x58/0x98 [ 8.031418] [] driver_attach+0x20/0x28 [ 8.031419] [] bus_add_driver+0x1c8/0x22c [ 8.031421] [] driver_register+0x60/0xf4 [ 8.031422] [] __platform_driver_register+0x4c/0x54 [ 8.031425] [] xgene_slimpro_i2c_driver_init+0x18/0x20 [ 8.031426] [] do_one_initcall+0x38/0x124 [ 8.031429] [] kernel_init_freeable+0x190/0x22c [ 8.031431] [] kernel_init+0x10/0xfc [ 8.031432] [] ret_from_fork+0x10/0x50 [ 8.031434] Code: cb030e63 8b030013 b140067f 54fffda8 (f9400a61) [ 8.031448] ---[ end trace 14eb48a4e1e1f9fb ]--- Signed-off-by: Hoan Tran Acked-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki

Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration

2017-07-07T17:24:07Z

Pull mailbox updates from Jassi Brar: - Minor improvement : avoid requiring unnecessary startup/shutdown callback that many drivers seem to not need - New controller driver for Qualcomm's APCS IPC * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce Qualcomm APCS IPC driver dt-bindings: mailbox: Introduce Qualcomm APCS global binding mailbox: Make startup and shutdown ops optional