user/sven/linux.git/drivers/md, branch v3.18.67

md/raid5: add thread_group worker async_tx_issue_pending_all

2017-08-11T16:30:08Z

commit 7e96d559634b73a8158ee99a7abece2eacec2668 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by: Ofer Heifetz Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

Raid5 should update rdev->sectors after reshape

2017-07-27T22:03:26Z

commit b5d27718f38843a74552e9a93d32e2391fd3999f upstream. The raid5 md device is created by the disks which we don't use the total size. For example, the size of the device is 5G and it just uses 3G of the devices to create one raid5 device. Then change the chunksize and wait reshape to finish. After reshape finishing stop the raid and assemble it again. It fails. mdadm -CR /dev/md0 -l5 -n3 /dev/loop[0-2] --size=3G --chunk=32 --assume-clean mdadm /dev/md0 --grow --chunk=64 wait reshape to finish mdadm -S /dev/md0 mdadm -As The error messages: [197519.814302] md: loop1 does not have a valid v1.2 superblock, not importing! [197519.821686] md: md_import_device returned -22 After reshape the data offset is changed. It selects backwards direction in this condition. In function super_1_load it compares the available space of the underlying device with sb->data_size. The new data offset gets bigger after reshape. So super_1_load returns -EINVAL. rdev->sectors is updated in md_finish_reshape. Then sb->data_size is set in super_1_sync based on rdev->sectors. So add md_finish_reshape in end_reshape. Signed-off-by: Xiao Ni Acked-by: Guoqing Jiang Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

md: don't use flush_signals in userspace processes

2017-07-27T22:03:26Z

commit f9c79bc05a2a91f4fba8bfd653579e066714b1ec upstream. The function flush_signals clears all pending signals for the process. It may be used by kernel threads when we need to prepare a kernel thread for responding to signals. However using this function for an userspaces processes is incorrect - clearing signals without the program expecting it can cause misbehavior. The raid1 and raid5 code uses flush_signals in its request routine because it wants to prepare for an interruptible wait. This patch drops flush_signals and uses sigprocmask instead to block all signals (including SIGKILL) around the schedule() call. The signals are not lost, but the schedule() call won't respond to them. Signed-off-by: Mikulas Patocka Acked-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

md: fix super_offset endianness in super_1_rdev_size_change

2017-07-15T08:14:40Z

commit 3fb632e40d7667d8bedfabc28850ac06d5493f54 upstream. The sb->super_offset should be big-endian, but the rdev->sb_start is in host byte order, so fix this by adding cpu_to_le64. Signed-off-by: Jason Yan Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

dm space map disk: fix some book keeping in the disk space map

2017-05-25T12:17:57Z

commit 0377a07c7a035e0d033cd8b29f0cb15244c0916a upstream. When decrementing the reference count for a block, the free count wasn't being updated if the reference count went to zero. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm thin metadata: call precommit before saving the roots

2017-05-25T12:17:57Z

commit 91bcdb92d39711d1adb40c26b653b7978d93eb98 upstream. These calls were the wrong way round in __write_initial_superblock. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm bufio: avoid a possible ABBA deadlock

2017-05-25T12:17:57Z

commit 1b0fb5a5b2dc0dddcfa575060441a7176ba7ac37 upstream. __get_memory_limit() tests if dm_bufio_cache_size changed and calls __cache_size_refresh() if it did. It takes dm_bufio_clients_lock while it already holds the client lock. However, lock ordering is violated because in cleanup_old_buffers() dm_bufio_clients_lock is taken before the client lock. This results in a possible deadlock and lockdep engine warning. Fix this deadlock by changing mutex_lock() to mutex_trylock(). If the lock can't be taken, it will be re-checked next time when a new buffer is allocated. Also add "unlikely" to the if condition, so that the optimizer assumes that the condition is false. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm btree: fix for dm_btree_find_lowest_key()

2017-05-25T12:17:56Z

commit 7d1fedb6e96a960aa91e4ff70714c3fb09195a5a upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by: Erez Zadok Signed-off-by: Vinothkumar Raja Signed-off-by: Nidhi Panpalia Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

md/raid1: avoid reusing a resync bio after error handling.

2017-05-20T12:18:42Z

commit 0c9d5b127f695818c2c5a3868c1f28ca2969e905 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by: Michael Wang Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.") Signed-off-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

dm era: save spacemap metadata root after the pre-commit

2017-05-20T12:18:41Z

commit 117aceb030307dcd431fdcff87ce988d3016c34a upstream. When committing era metadata to disk, it doesn't always save the latest spacemap metadata root in superblock. Due to this, metadata is getting corrupted sometimes when reopening the device. The correct order of update should be, pre-commit (shadows spacemap root), save the spacemap root (newly shadowed block) to in-core superblock and then the final commit. Signed-off-by: Somasundaram Krishnasamy Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman