user/sven/linux.git/drivers/md, branch v4.9.103

bcache: segregate flash only volume write streams

2018-04-13T17:48:29Z

[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui Reviewed-by: Michael Lyle Signed-off-by: Michael Lyle Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bcache: stop writeback thread after detaching

2018-04-13T17:48:29Z

[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui Reviewed-by: Michael Lyle Signed-off-by: Michael Lyle Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md-cluster: fix potential lock issue in add_new_disk

2018-04-13T17:48:03Z

[ Upstream commit 2dffdc0724004f38f5e39907747b53e4b0d80e59 ] The add_new_disk returns with communication locked if __sendmsg returns failure, fix it with call unlock_comm before return. Reported-by: Dan Carpenter CC: Goldwyn Rodrigues Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock

2018-04-13T17:47:49Z

[ Upstream commit 3d05f3aed5d721c2c77d20288c29ab26c6193ed5 ] On mainline, there is no functional difference, just less code, and symmetric lock/unlock paths. On PREEMPT_RT builds, this fixes the following warning, seen by Alexander GQ Gerasiov, due to the sleeping nature of spinlocks. BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993 in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1 CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G W 4.9.20-rt16-stand6-686 #1 Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: dump_stack+0x47/0x68 ? migrate_enable+0x4a/0xf0 ___might_sleep+0x101/0x180 rt_spin_lock+0x17/0x40 add_stripe_bio+0x4e3/0x6c0 [raid456] ? preempt_count_add+0x42/0xb0 raid5_make_request+0x737/0xdd0 [raid456] Reported-by: Alexander GQ Gerasiov Tested-by: Alexander GQ Gerasiov Signed-off-by: Julia Cartwright Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md/raid10: reset the 'first' at the end of loop

2018-04-08T10:12:59Z

commit 6f287ca6046edd34ed83aafb7f9033c9c2e809e2 upstream. We need to set "first = 0' at the end of rdev_for_each loop, so we can get the array's min_offset_diff correctly otherwise min_offset_diff just means the last rdev's offset diff. [only the first chunk, due to b506335e5d2b ("md/raid10: skip spare disk as 'first' disk") being already applied - gregkh] Suggested-by: NeilBrown Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

dm ioctl: remove double parentheses

2018-04-08T10:12:43Z

commit e36215d87f301f9567c8c99fd34e6c3521a94ddf upstream. The extra pair of parantheses is not needed and causes clang to generate warnings about the DM_DEV_CREATE_CMD comparison in validate_params(). Also remove another double parentheses that doesn't cause a warning. Signed-off-by: Matthias Kaehlcke Signed-off-by: Mike Snitzer Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

md/raid10: skip spare disk as 'first' disk

2018-03-24T10:00:20Z

[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ] Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info. Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang Cc: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md/raid10: wait up frozen array in handle_write_completed

2018-03-24T10:00:12Z

[ Upstream commit cf25ae78fc50010f66b9be945017796da34c434d ] Since nr_queued is changed, we need to call wake_up here if the array is already frozen and waiting for condition "nr_pending == nr_queued + extra" to be true. And commit 824e47daddbf ("RAID1: avoid unnecessary spin locks in I/O barrier code") which has already added the wake_up for raid1. Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md.c:didn't unlock the mddev before return EINVAL in array_size_store

2018-03-22T08:17:50Z

[ Upstream commit b670883bb9e55ba63a278d83e034faefc01ce2cf ] md.c: it needs to release the mddev lock before the array_size_store() returns. Fixes: ab5a98b132fd ("md-cluster: change array_sectors and update size are not supported") Signed-off-by: Zhilong Liu Reviewed-by: Guoqing Jiang Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

md/raid6: Fix anomily when recovering a single device in RAID6.

2018-03-22T08:17:50Z

[ Upstream commit 7471fb77ce4dc4cb81291189947fcdf621a97987 ] When recoverying a single missing/failed device in a RAID6, those stripes where the Q block is on the missing device are handled a bit differently. In these cases it is easy to check that the P block is correct, so we do. This results in the P block be destroy. Consequently the P block needs to be read a second time in order to compute Q. This causes lots of seeks and hurts performance. It shouldn't be necessary to re-read P as it can be computed from the DATA. But we only compute blocks on missing devices, since c337869d9501 ("md: do not compute parity unless it is on a failed drive"). So relax the change made in that commit to allow computing of the P block in a RAID6 which it is the only missing that block. This makes RAID6 recovery run much faster as the disk just "before" the recovering device is no longer seeking back-and-forth. Reported-by-tested-by: Brad Campbell Reviewed-by: Dan Williams Signed-off-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman