user/sven/linux.git/drivers/memory/Makefile, branch v6.3.12

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2022-12-13T23:22:14Z

Pull ARM updates from Russell King: - update unwinder to cope with module PLTs - enable UBSAN on ARM - improve kernel fault message - update UEFI runtime page tables dump - avoid clang's __aeabi_uldivmod generated in NWFPE code - disable FIQs on CPU shutdown paths - update XOR register usage - a number of build updates (using .arch, thread pointer, removal of lazy evaluation in Makefile) - conversion of stacktrace code to stackwalk - findbit assembly updates - hwcap feature updates for ARMv8 CPUs - instruction dump updates for big-endian platforms - support for function error injection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits) ARM: 9279/1: support function error injection ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones ARM: 9276/1: Refactor dump_instr() ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe ARM: 9273/1: Add hwcap for Speculation Barrier(SB) ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16 ARM: 9270/1: vfp: Add hwcap for FEAT_FHM ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16 ARM: 9267/1: Define Armv8 registers in AArch32 state ARM: findbit: add unwinder information ARM: findbit: operate by words ARM: findbit: convert to macros ARM: findbit: provide more efficient ARMv7 implementation ARM: findbit: document ARMv5 bit offset calculation ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code ARM: 9265/1: pass -march= only to compiler ...

ARM: 9263/1: use .arch directives instead of assembler command line flags

2022-11-08T18:36:17Z

Similar to commit a6c30873ee4a ("ARM: 8989/1: use .fpu assembler directives instead of assembler arguments"). GCC and GNU binutils support setting the "sub arch" via -march=, -Wa,-march, target function attribute, and .arch assembler directive. Clang was missing support for -Wa,-march=, but this was implemented in clang-13. The behavior of both GCC and Clang is to prefer -Wa,-march= over -march= for assembler and assembler-with-cpp sources, but Clang will warn about the -march= being unused. clang: warning: argument unused during compilation: '-march=armv6k' [-Wunused-command-line-argument] Since most assembler is non-conditionally assembled with one sub arch (modulo arch/arm/delay-loop.S which conditionally is assembled as armv4 based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the .arch assembler directive. Add a few more instances found in compile testing as found by Arnd and Nathan. Link: https://github.com/llvm/llvm-project/commit/1d51c699b9e2ebc5bcfdbe85c74cc871426333d4 Link: https://bugs.llvm.org/show_bug.cgi?id=48894 Link: https://github.com/ClangBuiltLinux/linux/issues/1195 Link: https://github.com/ClangBuiltLinux/linux/issues/1315 Suggested-by: Arnd Bergmann Suggested-by: Nathan Chancellor Signed-off-by: Arnd Bergmann Tested-by: Nathan Chancellor Signed-off-by: Nick Desaulniers Signed-off-by: Russell King (Oracle)

memory: brcmstb_memc: Add Broadcom STB memory controller driver

2022-08-18T06:11:45Z

Add support for configuring the Self Refresh Power Down (SRPD) inactivity timeout on Broadcom STB chips. This is used to conserve power when the DRAM activity is reduced. Signed-off-by: Florian Fainelli Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com

memory: dfl-emif: add the DFL EMIF private feature driver

2021-01-07T14:21:27Z

This driver is for the EMIF private feature implemented under FPGA Device Feature List (DFL) framework. It is used to expose memory interface status information as well as memory clearing control. The purpose of memory clearing block is to zero out all private memory when FPGA is to be reprogrammed. This gives users a reliable method to prevent potential data leakage. [mdf@kernel.org: Fixed up ABI doc] Reviewed-by: Tom Rix Acked-by: Krzysztof Kozlowski Signed-off-by: Xu Yilun Signed-off-by: Russ Weight Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman

memory: brcmstb_dpfe: add separate entry for compile test

2020-08-17T18:44:00Z

Add separate entry for Broadcom STB DPFE driver, enabled by default on ARCH_BRCMSTB. This allows compile testing. Signed-off-by: Krzysztof Kozlowski Acked-by: Florian Fainelli

Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2020-08-09T19:38:51Z

Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...

memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver

2020-07-07T18:58:17Z

The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/1591975362-22009-5-git-send-email-christophe.kerello@st.com

memory: add Renesas RPC-IF driver

2020-07-01T21:45:14Z

Add the memory driver for Renesas RPC-IF which registers either SPI or HyperFLash device depending on the contents of the device tree subnode. It also provides the absract "back end" device APIs that can be used by the "front end" SPI/MTD drivers to talk to the real hardware. Based on the original patch by Mason Yang . Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com Signed-off-by: Mark Brown

memory: Add Baikal-T1 L2-cache Control Block driver

2020-05-28T12:17:41Z

Baikal-T1 SoC provides a way to tune the MIPS P5600 CM2 L2-cache performance up. It can be done by changing the L2-RAM Data/Tag/WS latencies in a dedicated register exposed by the system controller. The driver added by this commit provides a dts properties-based and sysfs-based interface for it. The device DT node is supposed to be a child of Baikal-T1 System Controller node. Link: https://lore.kernel.org/r/20200526125928.17096-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Cc: Alexey Malahov Cc: Paul Burton Cc: Olof Johansson Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: soc@kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Arnd Bergmann

Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2019-07-20T16:34:55Z

Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ...