user/sven/linux.git/drivers/memory/emif.c, branch v3.9

memory: Convert to devm_ioremap_resource()

2013-01-22T19:41:56Z

Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]

2012-09-26T20:56:03Z

Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit], and adds stub functions for the case CONFIG_DEBUG_FS is not set. When CONFIG_DEBUG_FS is enabled, debugfs_create_dir and debugfs_create_file return NULL on failure, fix it. Signed-off-by: Axel Lin Acked-by : Santosh Shilimkar Signed-off-by: Greg Kroah-Hartman

memory: emif: add device tree support to emif driver

2012-09-04T23:14:31Z

Device tree support for the EMIF driver. LPDDR2 generic timings extraction from device is managed using couple of helper functions which can be used by other memory controller drivers. Reviewed-by: Benoit Cousson Reviewed-by: Grant Likely Tested-by: Lokesh Vutla Signed-off-by: Aneesh V Signed-off-by: Santosh Shilimkar Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

memory: emif: add debugfs entries for emif

2012-05-02T18:00:08Z

Add debug entries for: 1. calculated registers per frequency 2. last polled value of MR4(temperature level of LPDDR2 memory) Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Tested-by: Lokesh Vutla Signed-off-by: Greg Kroah-Hartman

memory: emif: add one-time settings

2012-05-02T17:58:12Z

Add settings that are not dependent on frequency or any other transient parameters. This includes - power managment control init - impedence calibration control - frequency independent phy configuration registers - initialization of temperature polling Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Tested-by: Lokesh Vutla Signed-off-by: Greg Kroah-Hartman

memory: emif: add interrupt and temperature handling

2012-05-02T17:56:30Z

Add an ISR for EMIF that: 1. reports details of access errors 2. takes action on thermal events Also clear all interrupts on shut-down. Pending IRQs may casue problems during warm-reset. Temperature handling: EMIF can be configured to poll the temperature level of an LPDDR2 device from the MR4 mode register in the device. EMIF generates an interrupt whenever it identifies a temperature level change between two consecutive pollings. Some of the timing parameters need to be de-rated at high temperatures. The interrupt handler takes care of doing this and also takes care of going back to nominal settings when temperature falls back to nominal levels. Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Signed-off-by: Greg Kroah-Hartman

memory: emif: handle frequency and voltage change events

2012-05-02T17:52:09Z

Change SDRAM timings and other settings as necessary on voltage and frequency changes. We calculate these register settings based on data from the device data sheet and inputs such a frequency, voltage state(stable or ramping), temperature level etc. TODO: frequency and voltage change handling needs to be integrated with clock framework and regulator framework respectively. This is not done today due to missing pieces in the kernel. Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Tested-by: Lokesh Vutla Signed-off-by: Greg Kroah-Hartman

memory: emif: add basic infrastructure for EMIF driver

2012-05-02T07:10:49Z

EMIF is an SDRAM controller used in various Texas Instruments SoCs. EMIF supports, based on its revision, one or more of LPDDR2/DDR2/DDR3 protocols. Add the basic infrastructure for EMIF driver that includes driver registration, probe, parsing of platform data etc. Signed-off-by: Aneesh V Reviewed-by: Santosh Shilimkar Reviewed-by: Benoit Cousson [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar Tested-by: Lokesh Vutla Signed-off-by: Greg Kroah-Hartman