user/sven/linux.git/drivers/memory, branch v4.6.1

Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd

2016-03-25T02:57:15Z

Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...

Merge tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2016-03-22T18:57:43Z

Pull IOMMU updates from Joerg Roedel: - updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 - new Mediatek IOMMU driver - support for the ARMv7 short descriptor format in the io-pgtable code - default domain support for the ARM SMMU - couple of other small fixes all over the place * tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/ipmmu-vmsa: Add r8a7795 DT binding iommu/mediatek: Check for NULL instead of IS_ERR() iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags iommu/mediatek: Fix handling of of_count_phandle_with_args result iommu/dma: Fix NEED_SG_DMA_LENGTH dependency iommu/mediatek: Mark PM functions as __maybe_unused iommu/mediatek: Select ARM_DMA_USE_IOMMU iommu/exynos: Use proper readl/writel register interface iommu/exynos: Pointers are nto physical addresses dts: mt8173: Add iommu/smi nodes for mt8173 iommu/mediatek: Add mt8173 IOMMU driver memory: mediatek: Add SMI driver dt-bindings: mediatek: Add smi dts binding dt-bindings: iommu: Add binding for mediatek IOMMU iommu/ipmmu-vmsa: Use ARCH_RENESAS iommu/exynos: Support multiple attach_device calls iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver iommu/exynos: Add support for v5 SYSMMU iommu/exynos: Update device tree documentation iommu/exynos: Add support for SYSMMU controller with bogus version reg ...

memory: mediatek: Add SMI driver

2016-02-25T15:49:08Z

This patch add SMI(Smart Multimedia Interface) driver. This driver is responsible to enable/disable iommu and control the power domain and clocks of each local arbiter. Signed-off-by: Yong Wu Tested-by: Philipp Zabel Reviewed-by: Daniel Kurtz Tested-by: Daniel Kurtz Signed-off-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: omap-gpmc: Add support for AAD timings

2016-02-08T14:22:03Z

In order to support extended timings parameters on hardware supporting the "AAD" mode like the AM335x or DM816x, add these entries into the GPMC driver if the hardware is capable. Tested on DM816x and AM335x. Signed-off-by: Neil Armstrong Acked-by: Tony Lindgren Signed-off-by: Roger Quadros

driver/memory: Removal of deprecated NO_IRQ

2016-02-01T18:45:05Z

Replacing the NO_IRQ macro with 0. If there is no interrupt, returned value will be 0 regardless of what NO_IRQ is defined. Signed-off-by: Raghav Dogra Signed-off-by: Brian Norris

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:42:30Z

Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...

fsl-ifc: add missing include on ARM64

2015-12-15T23:16:58Z

Need to include sched.h to fix the following compilation error if FSL_IFC is enabled on ARM64 machine. In file included from include/linux/mmzone.h:9:0, from include/linux/gfp.h:5, from include/linux/kmod.h:22, from include/linux/module.h:13, from drivers/memory/fsl_ifc.c:22: drivers/memory/fsl_ifc.c: In function ‘check_nand_stat’: include/linux/wait.h:165:35: error: ‘TASK_NORMAL’ undeclared (first use in this function) #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ include/linux/wait.h:165:35: note: each undeclared identifier is reported only once for each function it appears in #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ Analysis is as follows: I put some instrumental code and get the following .h files inclusion sequence: In file included from ./arch/arm64/include/asm/compat.h:25:0, from ./arch/arm64/include/asm/stat.h:23, from include/linux/stat.h:5, from include/linux/module.h:10, from drivers/memory/fsl_ifc.c:23: include/linux/sched.h:113:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘struct’ struct sched_attr { ^ CONFIG_COMPAT=y is enabled while 39 and 48 bit VA is selected. When 42 bit VA is selected, it does not enable CONFIG_COMPAT=y In ./arch/arm64/include/asm/stat.h:23, it has "#ifdef CONFIG_COMPAT" "#include " "..." "#endif" Since ./arch/arm64/include/asm/stat.h does not include ./arch/arm64/include/asm/compat.h, then it will not include include/linux/sched.h Hence we have to manually add "#include " in drivers/memory/fsl_ifc.c Signed-off-by: Lijun Pan Signed-off-by: Arnd Bergmann

memory/tegra: Add number of TLB lines for Tegra124

2015-12-14T15:11:35Z

Tegra124 was accidentally left out when the number of TLB lines was parameterized in commit 11cec15bf3fb ("iommu/tegra-smmu: Parameterize number of TLB lines"). Fortunately this doesn't cause any noticeable regressions upstream, presumably because there aren't any use-cases that exercise enough pressure on the SMMU. But it is a regression nonetheless, so let's fix it. Fixes: 11cec15bf3fb ("iommu/tegra-smmu: Parameterize number of TLB lines") Signed-off-by: Vince Hsu Signed-off-by: Tomasz Figa [treding@nvidia.com: extract from unrelated patch] Signed-off-by: Thierry Reding

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T23:00:03Z

Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...

Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2015-11-05T06:15:15Z

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...