user/sven/linux.git/drivers/memory, branch v5.4.13

memory: mtk-smi: Add PM suspend and resume ops

2020-01-17T18:48:59Z

commit fb03082a54acd66c61535edfefe96b2ff88ce7e2 upstream. In the commit 4f0a1a1ae351 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks"), we use pm_runtime callback to enable/disable the smi larb clocks. It will cause the larb's clock may not be disabled when suspend. That is because device_prepare will call pm_runtime_get_noresume which will keep the larb's PM runtime status still is active when suspend, then it won't enter our pm_runtime suspend callback to disable the corresponding clocks. This patch adds suspend pm_ops to force disable the clocks, Use "LATE" to make sure it disable the larb's clocks after the multimedia devices. Fixes: 4f0a1a1ae351 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks") Signed-off-by: Anan Sun Signed-off-by: Yong Wu Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman

iommu/mediatek: Clean up struct mtk_smi_iommu

2019-08-30T13:57:27Z

Remove the "struct mtk_smi_iommu" to simplify the code since it has only one item in it right now. Signed-off-by: Yong Wu Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Get rid of need_larbid

2019-08-30T13:57:27Z

The "mediatek,larb-id" has already been parsed in MTK IOMMU driver. It's no need to parse it again in SMI driver. Only clean some codes. This patch is fit for all the current mt2701, mt2712, mt7623, mt8173 and mt8183. After this patch, the "mediatek,larb-id" only be needed for mt2712 which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U in which the larbs in the "mediatek,larbs" always are ordered. Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also be deleted. CC: Matthias Brugger Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Add bus_sel for mt8183

2019-08-30T13:57:27Z

There are 2 mmu cells in a M4U HW. we could adjust some larbs entering mmu0 or mmu1 to balance the bandwidth via the smi-common register SMI_BUS_SEL(0x220)(Each larb occupy 2 bits). In mt8183, For better performance, we switch larb1/2/5/7 to enter mmu1 while the others still keep enter mmu0. In mt8173 and mt2712, we don't get the performance issue, Keep its default value(0x0), that means all the larbs enter mmu0. Note: smi gen1(mt2701/mt7623) don't have this bus_sel. And, the base of smi-common is completely different with smi_ao_base of gen1, thus I add new variable for that. CC: Matthias Brugger Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Invoke pm runtime_callback to enable clocks

2019-08-30T13:57:27Z

This patch only move the clk_prepare_enable and config_port into the runtime suspend/resume callback. It doesn't change the code content and sequence. This is a preparing patch for adjusting SMI_BUS_SEL for mt8183. (SMI_BUS_SEL need to be restored after smi-common resume every time.) Also it gives a chance to get rid of mtk_smi_larb_get/put which could be a next topic. CC: Matthias Brugger Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

iommu/mediatek: Add mt8183 IOMMU support

2019-08-30T13:57:27Z

The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use the ARM Short-descriptor like mt8173, and most of the HW registers are the same. Here list main differences between mt8183 and mt8173/mt2712: 1) mt8183 has only one M4U HW like mt8173 while mt2712 has two. 2) mt8183 don't have the "bclk" clock, it use the EMI clock instead. 3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB mode". 4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent the bit[33:32] in the physical address of the pgtable base, But the standard ttbr0[1] means the S bit which is enabled defaultly, Hence, we add a mask. 5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support. 6) mt8183 need reset_axi like mt8173. 7) the larb-id in smi-common is remapped. M4U should add its larbid_remap. Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Add gals support

2019-08-30T13:57:27Z

In some SoCs like mt8183, SMI add GALS(Global Async Local Sync) module which can help synchronize for the modules in different clock frequency. It can be seen as a "asynchronous fifo". This is a example diagram: M4U | ---------- | | gals0-rx gals1-rx | | | | gals0-tx gals1-tx | | ------------ SMI Common ------------ | +-----+--------+-----+- ... | | | | | gals-rx gals-rx | | | | | | | | | | gals-tx gals-tx | | | | | larb1 larb2 larb3 larb4 GALS only help transfer the command/data while it doesn't have the configuring register, thus it has the special "smi" clock and doesn't have the "apb" clock. From the diagram above, we add "gals0" and "gals1" clocks for smi-common and add a "gals" clock for smi-larb. This patch adds gals clock supporting in the SMI. Note that some larbs may still don't have the "gals" clock like larb1 and larb4 above. This is also a preparing patch for mt8183 which has GALS. CC: Matthias Brugger Signed-off-by: Yong Wu Reviewed-by: Evan Green Reviewed-by: Matthias Brugger Signed-off-by: Joerg Roedel

memory: mtk-smi: Use a struct for the platform data for smi-common

2019-08-30T13:57:26Z

Use a struct as the platform special data instead of the enumeration. Also there is a minor change that moving the position of "enum mtk_smi_gen" definition, this is because we expect define "struct mtk_smi_common_plat" before it is referred. This is a preparing patch for mt8183. Signed-off-by: Yong Wu Reviewed-by: Matthias Brugger Reviewed-by: Evan Green Signed-off-by: Joerg Roedel

memory: mtk-smi: Use a general config_port interface

2019-08-30T13:57:26Z

The config_port of mt2712 and mt8183 are the same. Use a general config_port interface instead. In addition, in mt2712, larb8 and larb9 are the bdpsys larbs which are not the normal larb, their register space are different from the normal one. thus, we can not call the general config_port. In mt8183, IPU0/1 and CCU connect with smi-common directly, they also are not the normal larb. Hence, we add a "larb_direct_to_common_mask" for these larbs which connect to smi-commmon directly. This is also a preparing patch for adding mt8183 SMI support. Signed-off-by: Yong Wu Reviewed-by: Matthias Brugger Reviewed-by: Evan Green Signed-off-by: Joerg Roedel

Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2019-07-20T16:34:55Z

Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ...