user/sven/linux.git/drivers/message, branch v4.14.80

scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()

2018-05-25T14:17:47Z

[ Upstream commit a7043e9529f3c367cc4d82997e00be034cbe57ca ] My static checker complains about an out of bounds read: drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo() error: buffer overflow 'hd->sel_timeout' 255 <= u32max. It's true that we probably should have a bounds check here. Signed-off-by: Dan Carpenter Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: mptsas: Disable WRITE SAME

2018-04-29T09:33:16Z

commit 94e5395d2403c8bc2504a7cbe4c4caaacb7b8b84 upstream. First generation MPT Fusion controllers can not translate WRITE SAME when the attached device is a SATA drive. Disable WRITE SAME support. Reported-by: Nikola Ciprich Cc: Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough

2017-08-30T01:51:45Z

Simplify the SMP passthrough code by switching it to the generic bsg-lib helpers that abstract away the details of the request code, and gets drivers out of seeing struct scsi_request. For the libsas host SMP code there is a small behavior difference in that we now always clear the residual len for successful commands, similar to the three other SMP handler implementations. Given that there is no partial command handling in the host SMP handler this should not matter in practice. [mkp: typos and checkpatch fixes] Signed-off-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: mptsas: Fixup device hotplug for VMWare ESXi

2017-08-25T21:32:42Z

VMWare ESXi emulates an mptsas HBA, but exposes all drives as direct-attached SAS drives. This it not how the driver originally envisioned things; SAS drives were supposed to be connected via an expander, and only SATA drives would be direct attached. As such, any hotplug event for direct-attach SAS drives was silently ignored, and the guest failed to detect new drives from within a VMWare ESXi environment. [mkp: typos] Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1030850 Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: mptfc: Do not call fc_block_scsi_eh() on host reset

2017-08-25T21:21:10Z

When we're resetting the host any remote port states will be reset anyway, so it's pointless to wait for dev_loss_tmo during host reset. Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: fusion: fix string overflow warning

2017-08-07T18:04:02Z

gcc points out a theorerical string overflow: drivers/message/fusion/mptbase.c: In function 'mpt_detach': drivers/message/fusion/mptbase.c:2103:17: error: '%s' directive writing up to 31 bytes into a region of size 28 [-Werror=format-overflow=] sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); ^~~~~ drivers/message/fusion/mptbase.c:2103:2: note: 'sprintf' output between 13 and 44 bytes into a destination of size 32 We can simply double the size of the local buffer here to be on the safe side, and using snprintf() instead of sprintf() protects us if ioc->name was not terminated properly. Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen

scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()

2017-04-24T22:21:17Z

Commit c5ce0abeb628 ("scsi: sas: move scsi_remove_host call...") moved the call to scsi_remove_host() into sas_remove_host(), but forgot to modify the mpt drivers. Fixes: c5ce0abeb628 ("scsi: sas: move scsi_remove_host call into sas_remove_host") Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"

2017-04-24T22:15:26Z

trivial fix to spelling mistake Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-02-21T19:51:42Z

Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...