user/sven/linux.git/drivers/mfd, branch v3.18.35

mfd: omap-usb-tll: Fix scheduling while atomic BUG

2016-06-06T23:11:00Z

[ Upstream commit b49b927f16acee626c56a1af4ab4cb062f75b5df ] We shouldn't be calling clk_prepare_enable()/clk_prepare_disable() in an atomic context. Fixes the following issue: [ 5.830970] ehci-omap: OMAP-EHCI Host Controller driver [ 5.830974] driver_register 'ehci-omap' [ 5.895849] driver_register 'wl1271_sdio' [ 5.896870] BUG: scheduling while atomic: udevd/994/0x00000002 [ 5.896876] 4 locks held by udevd/994: [ 5.896904] #0: (&dev->mutex){......}, at: [] __driver_attach+0x60/0xac [ 5.896923] #1: (&dev->mutex){......}, at: [] __driver_attach+0x70/0xac [ 5.896946] #2: (tll_lock){+.+...}, at: [] omap_tll_enable+0x2c/0xd0 [ 5.896966] #3: (prepare_lock){+.+...}, at: [] clk_prepare_lock+0x48/0xe0 [ 5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine [ 5.897048] Preemption disabled at:[< (null)>] (null) [ 5.897051] [ 5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233 [ 5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 5.897076] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.897087] [] (show_stack) from [] (dump_stack+0x88/0xc0) [ 5.897099] [] (dump_stack) from [] (__schedule_bug+0xac/0xd0) [ 5.897111] [] (__schedule_bug) from [] (__schedule+0x88/0x7e4) [ 5.897120] [] (__schedule) from [] (schedule+0x9c/0xc0) [ 5.897129] [] (schedule) from [] (schedule_preempt_disabled+0x14/0x20) [ 5.897140] [] (schedule_preempt_disabled) from [] (mutex_lock_nested+0x258/0x43c) [ 5.897150] [] (mutex_lock_nested) from [] (clk_prepare_lock+0x48/0xe0) [ 5.897160] [] (clk_prepare_lock) from [] (clk_prepare+0x10/0x28) [ 5.897169] [] (clk_prepare) from [] (omap_tll_enable+0x64/0xd0) [ 5.897180] [] (omap_tll_enable) from [] (usbhs_runtime_resume+0x18/0x17c) [ 5.897192] [] (usbhs_runtime_resume) from [] (pm_generic_runtime_resume+0x2c/0x40) [ 5.897202] [] (pm_generic_runtime_resume) from [] (__rpm_callback+0x38/0x68) [ 5.897210] [] (__rpm_callback) from [] (rpm_callback+0x70/0x88) [ 5.897218] [] (rpm_callback) from [] (rpm_resume+0x4ec/0x7ec) [ 5.897227] [] (rpm_resume) from [] (__pm_runtime_resume+0x4c/0x64) [ 5.897236] [] (__pm_runtime_resume) from [] (driver_probe_device+0x30/0x70) [ 5.897246] [] (driver_probe_device) from [] (__driver_attach+0x88/0xac) [ 5.897256] [] (__driver_attach) from [] (bus_for_each_dev+0x50/0x84) [ 5.897267] [] (bus_for_each_dev) from [] (bus_add_driver+0xcc/0x1e4) [ 5.897276] [] (bus_add_driver) from [] (driver_register+0xac/0xf4) [ 5.897286] [] (driver_register) from [] (do_one_initcall+0x100/0x1b8) [ 5.897296] [] (do_one_initcall) from [] (do_init_module+0x58/0x1c0) [ 5.897304] [] (do_init_module) from [] (SyS_finit_module+0x88/0x90) [ 5.897313] [] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x1c) [ 5.912697] ------------[ cut here ]------------ [ 5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58 [ 5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count()) Cc: Reported-by: H. Nikolaus Schaller Tested-by: H. Nikolaus Schaller Signed-off-by: Roger Quadros Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: wm5110: Add register patch for rev E and above

2015-12-03T15:04:38Z

[ Upstream commit 81207880cef207cd89db863f9aa1d65f22b4f2a2 ] Add a register patch for rev E and above that configures the location of some write sequences to assist with the headphone enables. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

mfd: lpc_ich: Assign subdevice ids automatically

2015-09-27T16:18:53Z

[ Upstream commit 1abf25a25b86dcfe28d243a5af71bd1c9d6de1ef ] Using -1 as platform device id means that the platform driver core will not assign any id to the device (the device name will not have id at all). This results problems on systems that have multiple PCHs (Platform Controller HUBs) because all of them also include their own copy of LPC device. All the subsequent device creations will fail because there already exists platform device with the same name. Fix this by passing PLATFORM_DEVID_AUTO as platform device id. This makes the platform device core to allocate new ids automatically. Signed-off-by: Mika Westerberg Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: arizona: Fix initialisation of the PM runtime

2015-09-17T05:27:59Z

[ Upstream commit 72e43164fd472f6c2659c8313b87da962322dbcf ] The PM runtime core by default assumes a chip is suspended when runtime PM is enabled. Currently the arizona driver enables runtime PM when the chip is fully active and then disables the DCVDD regulator at the end of arizona_dev_init. This however has several problems, firstly the if we reach the end of arizona_dev_init, we did not properly follow all the proceedures for shutting down the chip, and most notably we never marked the chip as cache only so any writes occurring between then and the next PM runtime resume will be lost. Secondly, if we are already resumed when we reach the end of dev_init, then at best we get unbalanced regulator enable/disables at work we lose DCVDD whilst we need it. Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better support for system suspend"), the PM runtime operations may disable/enable the IRQ, so the IRQs must now be enabled before we call any PM operations. This patch adds a call to pm_runtime_set_active to inform the PM core that the device is starting up active and moves the PM enabling to around the IRQ initialisation to avoid any PM callbacks happening until the IRQs are initialised. Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Charles Keepax Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: kempld-core: Fix callback return value check

2015-04-17T00:13:19Z

[ Upstream commit c8648508ebfc597058d2cd00b6c539110264a167 ] On success, callback function returns 0. So invert the if condition check so that we can break out of loop. Cc: stable@vger.kernel.org Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: rtsx_usb: Fix runtime PM deadlock

2015-01-30T01:40:42Z

commit b166010f6afbadb896efa37ff85eb681a8f89392 upstream. sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the device is awake while initializing a newly inserted card. Once it is called during suspending state and explicitly before rtsx_usb_suspend() acquires the same dev_mutex, both routine deadlock and further hang the driver because pm_runtime_get_sync() waits the pending PM operations. Fix this by using an empty suspend method. mmc_core always turns the LED off after a request is done and thus it is ok to remove the only rtsx_usb_turn_off_led() here. Fixes: 730876be2566 ("mfd: Add realtek USB card reader driver") Signed-off-by: Roger Tseng [Lee: Removed newly unused variable] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: tps65218: Make INT1 our status_base register

2015-01-30T01:40:42Z

commit f29ae369a412942e81035984fa3d7a22ddf91fcb upstream. If we don't tell regmap-irq that our first status register is at offset 1, it will try to read offset zero, which is the chipid register. Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by: Felipe Balbi Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: tps65218: Make INT[12] and STATUS registers volatile

2015-01-30T01:40:42Z

commit 773328da243978bebac82bf4c45604281edb6975 upstream. STATUS register can be modified by the HW, so we should bypass cache because of that. In the case of INT[12] registers, they are the ones that actually clear the IRQ source at the time they are read. If we rely on the cache for them, we will never be able to clear the interrupt, which will cause our IRQ line to be disabled due to IRQ throttling. Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by: Felipe Balbi Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: tc6393xb: Fail ohci suspend if full state restore is required

2015-01-08T18:30:16Z

commit 1a5fb99de4850cba710d91becfa2c65653048589 upstream. Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: twl4030-power: Fix regression with missing compatible flag

2015-01-08T18:30:15Z

commit 1b9b46d05f887aec418b3a5f4f55abf79316fcda upstream. Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") accidentally removed the compatible flag for "ti,twl4030-power" that should be there as documented in the binding. If "ti,twl4030-power" only the poweroff configuration is done by the driver. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Reported-by: "Dr. H. Nikolaus Schaller" Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman