user/sven/linux.git/drivers/mfd, branch v4.1.37

mfd: qcom_rpm: Parametrize also ack selector size

2016-08-16T12:25:09Z

[ Upstream commit f37be01e6dc606f2fcc5e95c9933d948ce19bd35 ] The RPM has two sets of selectors (IPC bit fields): request and acknowledge. Apparently, some models use 4*32 bit words for select and some use 7*32 bit words for request, but all use 7*32 words for acknowledge bits. So apparently you can on the models with requests of 4*32 select bits send 4*32 messages and get 7*32 different replies, so on ACK interrupt, 7*32 bit words need to be read. This is how the vendor code apparently works. Cc: stable@vger.kernel.org Reported-by: Stephen Boyd Signed-off-by: Linus Walleij Reviewed-by: Bjorn Andersson Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: qcom_rpm: Fix offset error for msm8660

2016-08-16T12:25:09Z

[ Upstream commit 9835f1b70bb3890d38308b9be4fb9d7451ba67f1 ] The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files : all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: Linus Walleij Reviewed-by: Björn Andersson Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: omap-usb-tll: Fix scheduling while atomic BUG

2016-06-06T23:12:14Z

[ Upstream commit b49b927f16acee626c56a1af4ab4cb062f75b5df ] We shouldn't be calling clk_prepare_enable()/clk_prepare_disable() in an atomic context. Fixes the following issue: [ 5.830970] ehci-omap: OMAP-EHCI Host Controller driver [ 5.830974] driver_register 'ehci-omap' [ 5.895849] driver_register 'wl1271_sdio' [ 5.896870] BUG: scheduling while atomic: udevd/994/0x00000002 [ 5.896876] 4 locks held by udevd/994: [ 5.896904] #0: (&dev->mutex){......}, at: [] __driver_attach+0x60/0xac [ 5.896923] #1: (&dev->mutex){......}, at: [] __driver_attach+0x70/0xac [ 5.896946] #2: (tll_lock){+.+...}, at: [] omap_tll_enable+0x2c/0xd0 [ 5.896966] #3: (prepare_lock){+.+...}, at: [] clk_prepare_lock+0x48/0xe0 [ 5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine [ 5.897048] Preemption disabled at:[< (null)>] (null) [ 5.897051] [ 5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233 [ 5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 5.897076] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.897087] [] (show_stack) from [] (dump_stack+0x88/0xc0) [ 5.897099] [] (dump_stack) from [] (__schedule_bug+0xac/0xd0) [ 5.897111] [] (__schedule_bug) from [] (__schedule+0x88/0x7e4) [ 5.897120] [] (__schedule) from [] (schedule+0x9c/0xc0) [ 5.897129] [] (schedule) from [] (schedule_preempt_disabled+0x14/0x20) [ 5.897140] [] (schedule_preempt_disabled) from [] (mutex_lock_nested+0x258/0x43c) [ 5.897150] [] (mutex_lock_nested) from [] (clk_prepare_lock+0x48/0xe0) [ 5.897160] [] (clk_prepare_lock) from [] (clk_prepare+0x10/0x28) [ 5.897169] [] (clk_prepare) from [] (omap_tll_enable+0x64/0xd0) [ 5.897180] [] (omap_tll_enable) from [] (usbhs_runtime_resume+0x18/0x17c) [ 5.897192] [] (usbhs_runtime_resume) from [] (pm_generic_runtime_resume+0x2c/0x40) [ 5.897202] [] (pm_generic_runtime_resume) from [] (__rpm_callback+0x38/0x68) [ 5.897210] [] (__rpm_callback) from [] (rpm_callback+0x70/0x88) [ 5.897218] [] (rpm_callback) from [] (rpm_resume+0x4ec/0x7ec) [ 5.897227] [] (rpm_resume) from [] (__pm_runtime_resume+0x4c/0x64) [ 5.897236] [] (__pm_runtime_resume) from [] (driver_probe_device+0x30/0x70) [ 5.897246] [] (driver_probe_device) from [] (__driver_attach+0x88/0xac) [ 5.897256] [] (__driver_attach) from [] (bus_for_each_dev+0x50/0x84) [ 5.897267] [] (bus_for_each_dev) from [] (bus_add_driver+0xcc/0x1e4) [ 5.897276] [] (bus_add_driver) from [] (driver_register+0xac/0xf4) [ 5.897286] [] (driver_register) from [] (do_one_initcall+0x100/0x1b8) [ 5.897296] [] (do_one_initcall) from [] (do_init_module+0x58/0x1c0) [ 5.897304] [] (do_init_module) from [] (SyS_finit_module+0x88/0x90) [ 5.897313] [] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x1c) [ 5.912697] ------------[ cut here ]------------ [ 5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58 [ 5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count()) Cc: Reported-by: H. Nikolaus Schaller Tested-by: H. Nikolaus Schaller Signed-off-by: Roger Quadros Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: intel_quark_i2c_gpio: load gpio driver first

2016-06-03T23:15:26Z

[ Upstream commit c39dc960e9c5196022cbc46507d4782b6fc314f6 ] On Intel Galileo boards the GPIO expander is connected to i2c bus. Moreover it is able to generate interrupt, but interrupt line is connected to GPIO. That's why we have to have GPIO driver in place when we will probe i2c host with device connected to it. Acked-by: Lee Jones Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

mfd: twl6040: Fix deferred probe handling for clk32k

2015-12-09T19:03:20Z

commit 75c08f17ec87c2d742487bb87408d6feebc526bd upstream. Commit 68bab8662f49 ("mfd: twl6040: Optional clk32k clock handling") added clock handling for the 32k clock from palmas-clk. However, that patch did not consider a typical situation where twl6040 is built-in, and palmas-clk is a loadable module like we have in omap2plus_defconfig. If palmas-clk is not loaded before twl6040 probes, we will get a "clk32k is not handled" warning during booting. This means that any drivers relying on this clock will mysteriously fail, including omap5-uevm WLAN and audio. Note that for WLAN, we probably should also eventually get the clk32kgaudio for MMC3 directly as that's shared between audio and WLAN SDIO at least for omap5-uevm. It seems the WLAN chip cannot get it as otherwise MMC3 won't get properly probed. Fixes: 68bab8662f49 ("mfd: twl6040: Optional clk32k clock handling") Signed-off-by: Tony Lindgren Reviewed-by: Felipe Balbi Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: max77843: Fix max77843_chg_init() return on error

2015-10-27T00:51:55Z

commit 1b52e50f2a402a266f1ba2281f0a57e87637a047 upstream. If i2c_new_dummy() fails in max77843_chg_init(), an PTR_ERR(NULL) is returned which is 0. So the function was wrongly returning a success value instead of an error code. Fixes: c7f585fe46d8 ("mfd: max77843: Add max77843 MFD driver core driver") Signed-off-by: Javier Martinez Canillas Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: arizona: Fix initialisation of the PM runtime

2015-09-13T16:07:44Z

commit 72e43164fd472f6c2659c8313b87da962322dbcf upstream. The PM runtime core by default assumes a chip is suspended when runtime PM is enabled. Currently the arizona driver enables runtime PM when the chip is fully active and then disables the DCVDD regulator at the end of arizona_dev_init. This however has several problems, firstly the if we reach the end of arizona_dev_init, we did not properly follow all the proceedures for shutting down the chip, and most notably we never marked the chip as cache only so any writes occurring between then and the next PM runtime resume will be lost. Secondly, if we are already resumed when we reach the end of dev_init, then at best we get unbalanced regulator enable/disables at work we lose DCVDD whilst we need it. Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better support for system suspend"), the PM runtime operations may disable/enable the IRQ, so the IRQs must now be enabled before we call any PM operations. This patch adds a call to pm_runtime_set_active to inform the PM core that the device is starting up active and moves the PM enabling to around the IRQ initialisation to avoid any PM callbacks happening until the IRQs are initialised. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: da9052: Fix broken regulator probe

2015-05-27T12:34:15Z

Fix broken probe of da9052 regulators, which since commit b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") use a non-deterministic platform-device id to retrieve static regulator information. Fortunately, adequate error handling was in place so probe would simply fail with an error message. Update the mfd-cell ids to be zero-based and use those to identify the cells when probing the regulator devices. Fixes: b3f6c73db732 ("mfd: da9052-core: Fix platform-device id collision") Cc: stable # v3.19 Signed-off-by: Johan Hovold Acked-by: Bartlomiej Zolnierkiewicz Reviewed-by: Mark Brown Signed-off-by: Lee Jones

Merge tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform

2015-04-26T20:36:02Z

Pull chrome platform updates from Olof Johansson: "Here's a set of updates to the Chrome OS platform drivers for this merge window. Main new things this cycle is: - Driver changes to expose the lightbar to users. With this, you can make your own blinkenlights on Chromebook Pixels. - Changes in the way that the atmel_mxt trackpads are probed. The laptop driver is trying to be smart and not instantiate the devices that don't answer to probe. For the trackpad that can come up in two modes (bootloader or regular), this gets complicated since the driver already knows how to handle the two modes including the actual addresses used. So now the laptop driver needs to know more too, instantiating the regular address even if the bootloader one is the probe that passed. - mfd driver improvements by Javier Martines Canillas, and a few bugfixes from him, kbuild and myself" * tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: chromeos_laptop - instantiate Atmel at primary address platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST platform/chrome: cros_ec_lpc - Include linux/io.h header file platform/chrome: fix platform_no_drv_owner.cocci warnings platform/chrome: cros_ec_lightbar - fix duplicate const warning platform/chrome: cros_ec_dev - fix Unknown escape '%' warning platform/chrome: Expose Chrome OS Lightbar to users platform/chrome: Create sysfs attributes for the ChromeOS EC mfd: cros_ec: Instantiate ChromeOS EC character device platform/chrome: Add Chrome OS EC userspace device interface platform/chrome: Add cros_ec_lpc driver for x86 devices mfd: cros_ec: Add char dev and virtual dev pointers mfd: cros_ec: Use fixed size arrays to transfer data with the EC

Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2015-04-15T00:29:55Z

Pull MFD updates from Lee Jones: "Changes to existing drivers: - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x - Rename child driver [max77693-flash => max77693-led]; max77693 - Error handling fixes; intel_soc_pmic - GPIO tweaking; intel_soc_pmic - Remove non-DT code; vexpress-sysreg, tc3589x - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr, rtc-s5m, sec-core, max77693, menelaus, wm5102-tables - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693, mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power, lpc_ich, menelaus, twl6040 - Update register/address values; rts5227, rts5249 - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x, qcom-rpm, qcom-spmi-pmic - Couple of trivial core Kconfig fixups - Remove use of seq_printf return value; ab8500-debugfs - Remove __exit markups; menelaus, tps65010 - Fix platform-device name collisions; mfd-core New drivers/supported devices: - Add support for wm8280/wm8281 into arizona - Add support for COMe-cBL6 into kempld-core - Add support for rts524a and rts525a into rts5249 - Add support for ipq8064 into qcom_rpm - Add support for extcon into axp20x - New MediaTek MT6397 PMIC driver - New Maxim MAX77843 PMIC dirver - New Intel Quark X1000 I2C-GPIO driver - New Skyworks SKY81452 driver" * tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: sec: Fix RTC alarm interrupt number on S2MPS11 mfd: wm5102: Remove registers for output 3R from readable list mfd: tps65010: Remove incorrect __exit markups mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes mfd: axp20x: Add support for extcon cell mfd: lpc_ich: Sort IDs mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's mfd: axp20x: Fix duplicate const for model names mfd: menelaus: Use macro for magic number mfd: menelaus: Drop support for SW controller VCORE mfd: menelaus: Delete omap_has_menelaus mfd: arizona: Correct type of gpio_defaults mfd: lpc_ich: Sort IDs mfd: Fix a typo in Kconfig mfd: qcom_rpm: Add support for IPQ8064 mfd: devicetree: qcom_rpm: Document IPQ8064 resources mfd: core: Fix platform-device name collisions mfd: intel_quark_i2c_gpio: Don't crash if !DMI dt-bindings: Add vendor-prefix for X-Powers ...