user/sven/linux.git/drivers/mfd, branch v4.17.4

mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock

2018-07-03T09:27:05Z

commit 4e93a658576ab115977225c9d0992b97ff19ba8c upstream. Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C. This incorrect input clock rate results too high I2C bus clock in case ACPI doesn't provide tuned I2C timing parameters since I2C host controller driver calculates them from input clock rate. Fix this by using the correct rate. We still share the same 230 ns SDA hold time value than Sunrisepoint. Cc: stable@vger.kernel.org Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs") Reported-by: Jian-Hong Pan Reported-by: Chris Chiu Reported-by: Daniel Drake Signed-off-by: Jarkko Nikula Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Tested-by: Jian-Hong Pan Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: intel-lpss: Program REMAP register in PIO mode

2018-07-03T09:27:05Z

commit d28b62520830b2d0bffa2d98e81afc9f5e537e8b upstream. According to documentation REMAP register has to be programmed in either DMA or PIO mode of the slice. Move the DMA capability check below to let REMAP register be programmed in PIO mode. Cc: stable@vger.kernel.org # 4.3+ Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: twl-core: Fix clock initialization

2018-07-03T09:27:05Z

commit c218b3b242bd04539621b468f01ecd2af5a21a45 upstream. When looking up the clock we must use the client->dev as device since that is the one which is probed via DT. Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Peter Ujfalusi Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

mfd: cros_ec: Retry commands when EC is known to be busy

2018-05-23T05:59:00Z

Commit 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error signaling") pointed out some bad code, but its analysis and conclusion was not 100% correct. It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS for transport errors, because this has a special meaning -- that we should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer busy. This is definitely the wrong thing for many commands, because among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve any RX data from the EC, so commands that expected some data back will instead start processing junk. For such commands, the right answer is to either propagate the error (and return that error to the caller) or resend the original command (*not* EC_CMD_GET_COMMS_STATUS). Unfortunately, commit 001dde9400d5 forgets a crucial point: that for some long-running operations, the EC physically cannot respond to commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be re-flashing its own code regions, so it can't respond to SPI interrupts. Instead, the EC prepares us ahead of time for being busy for a "long" time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we expect to see several "transport" errors (or, messages filled with EC_SPI_PAST_END). So we should really translate that to a retryable error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we get a ready status. IOW, it is actually important to treat some of these "junk" values as retryable errors. Together with commit 001dde9400d5, this resolves bugs like the following: 1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400d5, we would abort the first time we saw EC_SPI_PAST_END) 2. Before commit 001dde9400d5, transport errors (e.g., EC_SPI_RX_BAD_DATA) seen in other commands (e.g., EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they will now yield -EAGAIN return values, and tools like 'hwclock' will simply fail instead of retrieving and re-programming undefined time values Fixes: 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error signaling") Signed-off-by: Brian Norris Signed-off-by: Lee Jones

platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle

2018-04-11T05:25:07Z

This adds a sysfs attribute (/sys/class/chromeos/cros_ec/kb_wake_angle) used to set and get the keyboard wake lid angle. This attribute is present only if 2 accelerometers are controlled by the EC. This patch also moves the cros_ec features check before the device is added so the features map obtained from the EC is ready on time. Signed-off-by: Gwendal Grignou Signed-off-by: Enric Balletbo i Serra Reviewed-by: Andy Shevchenko Acked-by: Lee Jones Signed-off-by: Benson Leung

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro

2018-02-07T10:50:21Z

The DEFINE_SHOW_ATTRIBUTE() helper macro would be useful for current users, which are many of them, and for new comers to decrease code duplication. Acked-by: Lee Jones Acked-by: Darren Hart (VMware) Signed-off-by: Andy Shevchenko

Merge tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

2018-01-29T19:35:24Z

Pull regmap updates from Mark Brown: "A very busy release for regmap, all fairly specialist stuff but useful: - Support for disabling locking from Bartosz Golaszewski, allowing users that handle their own locking to save some overhead. - Support for hwspinlocks in syscons in MFD from Baolin Wang, this is going through the regmap tree since the first users turned up some some cases that needed interface tweaks with 0 being used as a syscon identifier. - Support for devices with no read or write flag from Andrew F. Davis. - Basic support for devices on SoundWire buses from Vinod Koul" * tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: mfd: syscon: Add hardware spinlock support regmap: Allow empty read/write_flag_mask regcache: flat: Un-inline index lookup from cache access regmap: Add SoundWire bus support regmap: Add one flag to indicate if a hwlock should be used regmap: debugfs: document why we don't create the debugfs entries regmap: debugfs: emit a debug message when locking is disabled regmap: use proper part of work_buf for storing val regmap: potentially duplicate the name string stored in regmap regmap: Disable debugfs when locking is disabled regmap: rename regmap_lock_unlock_empty() to regmap_lock_unlock_none() regmap: allow to disable all locking mechanisms regmap: Remove the redundant config to select hwspinlock

Merge tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2018-01-29T18:59:24Z

Pull MFD updates from Lee Jones: "New Drivers: - Add support for RAVE Supervisory Processor Moved drivers: - Move Realtek Card Reader Driver to Misc New Device Support: - Add support for Pinctrl to axp20x New Functionality: - Add resume support to atmel-flexcom Fix-ups: - Split MFD (mfd) and userspace handlers (platform) in cros_ec - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core - Clean-up error handling in ab8500-debugfs - General tidying up in tmio_core - Kconfig fix-ups for qcom-pm8xxx - Licensing changes (SPDX) to stm32-lptimer, stm32-timers - Device Tree fixups in mc13xxx - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc, kempld-core, intel_soc_pmic_core.c, ab8500-debugfs" * tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro atmel_flexcom: Support resuming after a chip reset mfd: Remove duplicate includes dt-bindings: mfd: mc13xxx: Add the unit address to sysled mfd: stm32: Adopt SPDX identifier mfd: axp20x: Add pinctrl cell for AXP813 mfd: pm8xxx: Make elegible for COMPILE_TEST mfd: kempld-core: Use resource_size function on resource object mfd: tmio: Move register macros to tmio_core.c mfd: cros ec: spi: Simplify delay handling between SPI messages mfd: palmas: Assign the right powerhold mask for tps65917 mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers() mfd: ti_am335x_tscadc: Remove redundant assignment to node mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed' dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver watchdog: Add RAVE SP watchdog driver mfd: Add driver for RAVE Supervisory Processor serdev: Introduce devm_serdev_device_open() ...

Merge branch 'pm-core'

2018-01-18T01:55:09Z

* pm-core: (29 commits) dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag PM: i2c-designware-platdrv: Optimize power management PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path PM / core: Assign the wakeup_path status flag in __device_prepare() PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization PM / core: Add helpers for subsystem callback selection PM / wakeup: Drop redundant check from device_init_wakeup() PM / wakeup: Drop redundant check from device_set_wakeup_enable() PM / wakeup: only recommend "call"ing device_init_wakeup() once ...