user/sven/linux.git/drivers/mfd, branch v5.10.99

mfd: atmel-flexcom: Use .resume_noirq

2022-01-27T09:53:51Z

[ Upstream commit 5d051cf94fd5834a1513aa77e542c49fd973988a ] Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might be connected critical devices (like PMIC) which on suspend/resume should be suspended/resumed at the end/beginning. i2c uses .suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom to use .resume_noirq as it should be resumed before the embedded IPs. Otherwise the embedded devices might behave badly. Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset") Signed-off-by: Claudiu Beznea Tested-by: Codrin Ciubotariu Acked-by: Nicolas Ferre Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211028135138.3481166-3-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin

mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP

2022-01-27T09:53:51Z

[ Upstream commit 8c0fad75dcaa650e3f3145a2c35847bc6a65cb7f ] Remove compilation flag and use __maybe_unused and pm_ptr instead. Signed-off-by: Claudiu Beznea Acked-by: Nicolas Ferre Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211028135138.3481166-2-claudiu.beznea@microchip.com Signed-off-by: Sasha Levin

mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()

2022-01-16T08:14:23Z

commit c9e143084d1a602f829115612e1ec79df3727c8b upstream. The runtime PM callback may be called as soon as the runtime PM facility is enabled and activated. It means that ->suspend() may be called before we finish probing the device in the ACPI case. Hence, NULL pointer dereference: intel-lpss INT34BA:00: IRQ index 0 not found BUG: kernel NULL pointer dereference, address: 0000000000000030 ... Workqueue: pm pm_runtime_work RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss] To fix this, first try to register the device and only after that enable runtime PM facility. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Reported-by: Orlando Chamberlain Reported-by: Aditya Garg Signed-off-by: Andy Shevchenko Tested-by: Aditya Garg Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

mfd: dln2: Add cell for initializing DLN2 ADC

2021-11-18T13:04:30Z

commit 313c84b5ae4104e48c661d5d706f9f4c425fd50f upstream. This patch extends the DLN2 driver; adding cell for adc_dln2 module. The original patch[1] fell through the cracks when the driver was added so ADC has never actually been usable. That patch did not have ACPI support which was added in v5.9, so the oldest supported version this current patch can be backported to is 5.10. [1] https://www.spinics.net/lists/linux-iio/msg33975.html Cc: # 5.10+ Signed-off-by: Jack Andersen Signed-off-by: Noralf Trønnes Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.org Signed-off-by: Greg Kroah-Hartman

mfd: core: Add missing of_node_put for loop iteration

2021-11-18T13:04:26Z

[ Upstream commit 002be81140075e17a1ebd5c3c55e356fbab0ddad ] Early exits from for_each_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/mfd/mfd-core.c:197:2-24: WARNING: Function "for_each_child_of_node" should have of_node_put() before goto around lines 209. Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin

mfd: lpc_sch: Rename GPIOBASE to prevent build error

2021-09-22T10:28:06Z

[ Upstream commit cdff1eda69326fb46de10c5454212b3efcf4bb41 ] One MIPS platform (mach-rc32434) defines GPIOBASE. This macro conflicts with one of the same name in lpc_sch.c. Rename the latter one to prevent the build error. ../drivers/mfd/lpc_sch.c:25: error: "GPIOBASE" redefined [-Werror] 25 | #define GPIOBASE 0x44 ../arch/mips/include/asm/mach-rc32434/rb.h:32: note: this is the location of the previous definition 32 | #define GPIOBASE 0x050000 Cc: Denis Turischev Fixes: e82c60ae7d3a ("mfd: Introduce lpc_sch for Intel SCH LPC bridge") Signed-off-by: Randy Dunlap Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"

2021-09-22T10:28:06Z

[ Upstream commit 922e8ce883e59b52786b2c11656d84dc58ef084a ] The IRQ support for SCH GPIO is not specific to the Intel Quark SoC. Moreover the IRQ routing is quite interesting there, so while it's needs a special support, the driver haven't it anyway yet. Due to above remove basically redundant code of IRQ support. This reverts commit ec689a8a8155ce8b966bd5d7737a3916f5e48be3. Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set

2021-09-22T10:28:03Z

[ Upstream commit a946506c48f3bd09363c9d2b0a178e55733bcbb6 ] The driver was registering IRQ 0 when no IRQ was set. This leads to warnings with newer kernels. Clear the resource flags, so no resource is registered at all in this case. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer Reviewed-by: Andrew Lunn Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: axp20x: Update AXP288 volatile ranges

2021-09-22T10:28:02Z

[ Upstream commit f949a9ebce7a18005266b859a17f10c891bb13d7 ] On Cherry Trail devices with an AXP288 PMIC the external SD-card slot used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode) as signal-voltage. These regulators are turned on/off and in case of the signal-voltage also have their output-voltage changed by the _PS0 and _PS3 power- management ACPI methods on the MMC-controllers ACPI fwnode as well as by the _DSM ACPI method for changing the signal voltage. The AML code implementing these methods is directly accessing the PMIC through ACPI I2C OpRegion accesses, instead of using the special PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c . This means that the contents of the involved PMIC registers can change without the change being made through the regmap interface, so regmap should not cache the contents of these registers. Mark the regulator power on/off, the regulator voltage control and the GPIO1 control registers as volatile, to avoid regmap caching them. Specifically this fixes an issue on some models where the i915 driver toggles another LDO using the same on/off register on/off through MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element()) which then writes back a cached on/off register-value where the card-voltage is off causing the external sdcard slot to stop working when the screen goes blank, or comes back on again. The regulator register-range now marked volatile also includes the buck regulator control registers. This is done on purpose these are normally not touched by the AML code, but they are updated directly by the SoC's PUNIT which means that they may also change without going through regmap. Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms, so even though this is an ACPI specific problem there is no need to make the new volatile ranges conditional since these platforms always use ACPI. Fixes: dc91c3b6fe66 ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile") Fixes: cd53216625a0 ("mfd: axp20x: Fix axp288 volatile ranges") Reported-and-tested-by: Clamshell Signed-off-by: Hans de Goede Reviewed-by: Chen-Yu Tsai Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: Don't use irq_create_mapping() to resolve a mapping

2021-09-22T10:28:00Z

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ] Although irq_create_mapping() is able to deal with duplicate mappings, it really isn't supposed to be a substitute for irq_find_mapping(), and can result in allocations that take place in atomic context if the mapping didn't exist. Fix the handful of MFD drivers that use irq_create_mapping() in interrupt context by using irq_find_mapping() instead. Cc: Linus Walleij Cc: Lee Jones Cc: Maxime Coquelin Cc: Alexandre Torgue Signed-off-by: Marc Zyngier Signed-off-by: Lee Jones Signed-off-by: Sasha Levin