user/sven/linux.git/drivers/mfd, branch v5.4.215

mfd: max77620: Fix refcount leak in max77620_initialise_fps

2022-08-25T09:18:04Z

[ Upstream commit 1520669c8255bd637c6b248b2be910e2688d38dd ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 327156c59360 ("mfd: max77620: Add core driver for MAX77620/MAX20024") Signed-off-by: Miaoqian Lin Reviewed-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com Signed-off-by: Sasha Levin

mfd: t7l66xb: Drop platform disable callback

2022-08-25T09:18:04Z

[ Upstream commit 128ac294e1b437cb8a7f2ff8ede1cde9082bddbe ] None of the in-tree instantiations of struct t7l66xb_platform_data provides a disable callback. So better don't dereference this function pointer unconditionally. As there is no user, drop it completely instead of calling it conditional. This is a preparation for making platform remove callbacks return void. Fixes: 1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC") Signed-off-by: Uwe Kleine-König Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de Signed-off-by: Sasha Levin

mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()

2022-06-14T16:11:42Z

[ Upstream commit 311242c7703df0da14c206260b7e855f69cb0264 ] It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: b5e29aa880be ("mfd: davinci_voicecodec: Remove pointless #include") Signed-off-by: Yang Yingliang Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin

mfd: ipaq-micro: Fix error check return value of platform_get_irq()

2022-06-14T16:11:40Z

[ Upstream commit 3b49ae380ce1a3054e0c505dd9a356b82a5b48e8 ] platform_get_irq() return negative value on failure, so null check of irq is incorrect. Fix it by comparing whether it is less than zero. Fixes: dcc21cc09e3c ("mfd: Add driver for Atmel Microcontroller on iPaq h3xxx") Reported-by: Zeal Robot Signed-off-by: Lv Ruyi Reviewed-by: Linus Walleij Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220412085305.2533030-1-lv.ruyi@zte.com.cn Signed-off-by: Sasha Levin

mfd: asic3: Add missing iounmap() on error asic3_mfd_probe

2022-04-15T12:18:17Z

[ Upstream commit e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ] Add the missing iounmap() before return from asic3_mfd_probe in the error handling case. Fixes: 64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area") Signed-off-by: Miaoqian Lin Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220307072947.5369-1-linmq006@gmail.com Signed-off-by: Sasha Levin

mfd: mc13xxx: Add check for mc13xxx_irq_request

2022-04-15T12:18:15Z

[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ] As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value of the mc13xxx_irq_request() and return error if fails. Fixes: 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx") Signed-off-by: Jiasheng Jiang Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220224022331.3208275-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin

mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()

2022-01-16T08:15:38Z

commit c9e143084d1a602f829115612e1ec79df3727c8b upstream. The runtime PM callback may be called as soon as the runtime PM facility is enabled and activated. It means that ->suspend() may be called before we finish probing the device in the ACPI case. Hence, NULL pointer dereference: intel-lpss INT34BA:00: IRQ index 0 not found BUG: kernel NULL pointer dereference, address: 0000000000000030 ... Workqueue: pm pm_runtime_work RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss] To fix this, first try to register the device and only after that enable runtime PM facility. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Reported-by: Orlando Chamberlain Reported-by: Aditya Garg Signed-off-by: Andy Shevchenko Tested-by: Aditya Garg Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set

2021-09-22T10:26:44Z

[ Upstream commit a946506c48f3bd09363c9d2b0a178e55733bcbb6 ] The driver was registering IRQ 0 when no IRQ was set. This leads to warnings with newer kernels. Clear the resource flags, so no resource is registered at all in this case. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer Reviewed-by: Andrew Lunn Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: axp20x: Update AXP288 volatile ranges

2021-09-22T10:26:44Z

[ Upstream commit f949a9ebce7a18005266b859a17f10c891bb13d7 ] On Cherry Trail devices with an AXP288 PMIC the external SD-card slot used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode) as signal-voltage. These regulators are turned on/off and in case of the signal-voltage also have their output-voltage changed by the _PS0 and _PS3 power- management ACPI methods on the MMC-controllers ACPI fwnode as well as by the _DSM ACPI method for changing the signal voltage. The AML code implementing these methods is directly accessing the PMIC through ACPI I2C OpRegion accesses, instead of using the special PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c . This means that the contents of the involved PMIC registers can change without the change being made through the regmap interface, so regmap should not cache the contents of these registers. Mark the regulator power on/off, the regulator voltage control and the GPIO1 control registers as volatile, to avoid regmap caching them. Specifically this fixes an issue on some models where the i915 driver toggles another LDO using the same on/off register on/off through MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element()) which then writes back a cached on/off register-value where the card-voltage is off causing the external sdcard slot to stop working when the screen goes blank, or comes back on again. The regulator register-range now marked volatile also includes the buck regulator control registers. This is done on purpose these are normally not touched by the AML code, but they are updated directly by the SoC's PUNIT which means that they may also change without going through regmap. Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms, so even though this is an ACPI specific problem there is no need to make the new volatile ranges conditional since these platforms always use ACPI. Fixes: dc91c3b6fe66 ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile") Fixes: cd53216625a0 ("mfd: axp20x: Fix axp288 volatile ranges") Reported-and-tested-by: Clamshell Signed-off-by: Hans de Goede Reviewed-by: Chen-Yu Tsai Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: Don't use irq_create_mapping() to resolve a mapping

2021-09-22T10:26:43Z

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ] Although irq_create_mapping() is able to deal with duplicate mappings, it really isn't supposed to be a substitute for irq_find_mapping(), and can result in allocations that take place in atomic context if the mapping didn't exist. Fix the handful of MFD drivers that use irq_create_mapping() in interrupt context by using irq_find_mapping() instead. Cc: Linus Walleij Cc: Lee Jones Cc: Maxime Coquelin Cc: Alexandre Torgue Signed-off-by: Marc Zyngier Signed-off-by: Lee Jones Signed-off-by: Sasha Levin