user/sven/linux.git/drivers/misc/Kconfig, branch v3.2.22

pch_phub: Support new device LAPIS Semiconductor ML7831 IOH

2011-11-15T19:01:48Z

ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc

2011-11-02T02:55:06Z

* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...

ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig

2011-10-07T15:39:19Z

Remove dependency line which was not including the SAM9G45. [arnd: added dependency on HAVE_CLK to avoid breaking other machines] Signed-off-by: Nicolas Ferre Signed-off-by: Arnd Bergmann

[media] altera-stapl: it is time to move out from staging

2011-09-23T18:00:57Z

[mchehab@redhat.com: Fix a merge conflict] Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab

pti: add missing CONFIG_PCI dependency

2011-08-22T21:12:23Z

allmodconfig compile fails on s390 because of the new PTI driver: drivers/misc/pti.c:407:3: error: implicit declaration of function 'pci_iounmap' drivers/misc/pti.c:410:3: error: implicit declaration of function 'pci_release_region' Add a 'depends on PCI' statement so it doesn't get compiled. Cc: J Freyensee Signed-off-by: Tracey Dent Acked-by: Randy Dunlap Signed-off-by: Sergei Trofimovich Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman

drivers/misc: add support the FSA9480 USB Switch

2011-07-26T03:57:14Z

The FSA9480 is a USB port accessory detector and switch. This patch adds support the FSA9480 USB Switch. [akpm@linux-foundation.org: make a couple of things static] Signed-off-by: Donggeun Kim Signed-off-by: Minkyu Kang Signed-off-by: Kyungmin Park Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

geode: reflect mfgpt dependency on mfd

2011-07-26T03:57:14Z

As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs which then make the GPIO, MFGPT, ACPI, etc. all visible to the system. So the dependencies of the MFGPT stuff have changed, and most people expect Kconfig to bring in the necessary dependencies. Without them, the module fails to load and most people don't understand why because the details of the rewrite aren't captured anywhere most people who know to look. This dependency needs to be reflected in Kconfig. Signed-off-by: Philip A. Prindeville Acked-by: Alexandros C. Couloumbis Acked-by: Andres Salomon Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2011-05-23T19:23:20Z

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.

misc: Add CARMA DATA-FPGA Access Driver

2011-05-19T06:55:08Z

This driver allows userspace to access the data processing FPGAs on the OVRO CARMA board. It has two modes of operation: 1) random access This allows users to poke any DATA-FPGA registers by using mmap to map the address region directly into their memory map. 2) correlation dumping When correlating, the DATA-FPGA's have special requirements for getting the data out of their memory before the next correlation. This nominally happens at 64Hz (every 15.625ms). If the data is not dumped before the next correlation, data is lost. The data dumping driver handles buffering up to 1 second worth of correlation data from the FPGAs. This lowers the realtime scheduling requirements for the userspace process reading the device. Signed-off-by: Ira W. Snyder Signed-off-by: Benjamin Herrenschmidt

Intel PTI implementaiton of MIPI 1149.7.

2011-05-13T23:31:00Z

The PTI (Parallel Trace Interface) driver directs trace data routed from various parts in the system out through an Intel Penwell PTI port and out of the mobile device for analysis with a debugging tool (Lauterbach or Fido). Though n_tracesink and n_tracerouter line discipline drivers are used to extract modem tracing data to the PTI driver and other parts of an Intel mobile solution, the PTI driver can be used independent of n_tracesink and n_tracerouter. You should select this driver if the target kernel is meant for an Intel Atom (non-netbook) mobile device containing a MIPI P1149.7 standard implementation. Signed-off-by: J Freyensee Signed-off-by: Greg Kroah-Hartman