user/sven/linux.git/drivers/misc/mei, branch v4.14.151

mei: me: add denverton innovation engine device IDs

2019-01-31T07:13:42Z

commit f7ee8ead151f9d0b8dac6ab6c3ff49bbe809c564 upstream. Add the Denverton innovation engine (IE) device ids. The IE is an ME-like device which provides HW security offloading. Cc: Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman

mei: bus: type promotion bug in mei_nfc_if_version()

2018-09-26T06:38:14Z

commit b40b3e9358fbafff6a4ba0f4b9658f6617146f9c upstream. We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: bus: need to unlink client before freeing

2018-09-26T06:38:06Z

commit 34f1166afd67f9f48a08c52f36180048908506a4 upstream. In case a client fails to connect in mei_cldev_enable(), the caller won't call the mei_cldev_disable leaving the client in a linked stated. Upon driver unload the client structure will be freed in mei_cl_bus_dev_release(), leaving a stale pointer on a fail_list. This will eventually end up in crash during power down flow in mei_cl_set_disonnected(). RIP: mei_cl_set_disconnected+0x5/0x260[mei] Call trace: mei_cl_all_disconnect+0x22/0x30 mei_reset+0x194/0x250 __synchronize_hardirq+0x43/0x50 _cond_resched+0x15/0x30 mei_me_intr_clear+0x20/0x100 mei_stop+0x76/0xb0 mei_me_shutdown+0x3f/0x80 pci_device_shutdown+0x34/0x60 kernel_restart+0x0e/0x30 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455 Fixes: 'c110cdb17148 ("mei: bus: make a client pointer always available")' Cc: 4.10+ Tested-by: Georg Müller Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: ignore not found client in the enumeration

2018-09-26T06:38:06Z

commit 8d2d8935d30cc2acc57a3196dc10dfa8d5cbcdab upstream. Some of the ME clients are available only for BIOS operation and are removed during hand off to an OS. However the removal is not instant. A client may be visible on the client list when the mei driver requests for enumeration, while the subsequent request for properties will be answered with client not found error value. The default behavior for an error is to perform client reset while this error is harmless and the link reset should be prevented. This issue started to be visible due to suspend/resume timing changes. Currently reported only on the Haswell based system. Fixes: [33.564957] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND [33.564978] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71. [33.565270] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000255 60002306 00000200 00004401 00000000 00000010 Cc: Reported-by: Heiner Kallweit Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: don't update offset in write

2018-09-05T07:26:33Z

commit a103af1b64d74853a5e08ca6c86aeb0e5c6ca4f1 upstream. MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: remove dev_err message on an unsupported ioctl

2018-04-08T12:26:31Z

commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream. Currently the driver spams the kernel log on unsupported ioctls which is unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway. I suspect this was originally for debugging purposes but it really is not required so remove it. Signed-off-by: Colin Ian King Cc: stable Signed-off-by: Greg Kroah-Hartman

mei: me: add cannon point device ids for 4th device

2018-02-25T10:08:04Z

commit 2a4ac172c2f257d28c47b90c9e381bec31edcc44 upstream. Add cannon point device ids for 4th (itouch) device. Cc: 4.14+ Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: me: add cannon point device ids

2018-02-25T10:08:04Z

commit f8f4aa68a8ae98ed79c8fee3488c38a2f5d2de8c upstream. Add CNP LP and CNP H device ids for cannon lake and coffee lake platforms. Cc: 4.14+ Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: me: allow runtime pm for platform with D0i3

2018-02-03T16:39:22Z

commit cc365dcf0e56271bedf3de95f88922abe248e951 upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: Rafael J. Wysocki Signed-off-by: Tomas Winkler Reviewed-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman