user/sven/linux.git/drivers/misc/mic/card, branch v4.18.2

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

misc: mic: MIC host and card driver changes to enable VOP

2016-02-10T01:32:37Z

This patch modifies the MIC host and card drivers to start using the VOP driver. The MIC host and card drivers now implement the VOP bus operations and register a VOP device on the VOP bus. MIC driver stack documentation is also updated to include the new VOP driver. Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman

misc: mic: Remove MIC X100 card virtio functionality

2016-02-10T01:32:37Z

This patch deletes the virtio functionality from the MIC X100 card driver. A subsequent patch will re-enable this functionality by consolidating the hardware independent logic in a new Virtio over PCIe (VOP) driver. Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman

mic_virtio: fix a timeout loop

2016-02-08T06:53:40Z

After the loop we test "if (!retry)" to see if we timedout. The problem is "retry--" is a post-op so retry will be -1 at the end of the loop. I have fixed this by changing it to a pre-op instead. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

virtio: make find_vqs() checkpatch.pl-friendly

2016-01-12T18:47:06Z

checkpatch.pl wants arrays of strings declared as follows: static const char * const names[] = { "vq-1", "vq-2", "vq-3" }; Currently the find_vqs() function takes a const char *names[] argument so passing checkpatch.pl's const char * const names[] results in a compiler error due to losing the second const. This patch adjusts the find_vqs() prototype and updates all virtio transports. This makes it possible for virtio_balloon.c, virtio_input.c, virtgpu_kms.c, and virtio_rpmsg_bus.c to use the checkpatch.pl-friendly type. Signed-off-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin Acked-by: Bjorn Andersson

misc: mic: Remove COSM functionality from the MIC card driver

2015-10-04T11:46:06Z

Since card side COSM functionality, to trigger MIC device shutdowns and communicate shutdown status to the host, is now moved into a separate COSM client driver, this patch removes this functionality from the base MIC card driver. The mic_bus driver is also updated to use the device index provided by COSM rather than maintain its own device index. Reviewed-by: Nikhil Rao Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman

misc: mic: MIC card driver specific changes to enable SCIF

2015-05-24T19:13:37Z

MIC card driver specific changes to enable SCIF. This patch implements the SCIF hardware bus operations and registers a SCIF device on the SCIF hardware bus. Reviewed-by: Nikhil Rao Signed-off-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09Z

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

virtio: allow finalize_features to fail

2014-12-09T14:32:32Z

This will make it easy for transports to validate features and return failure. Signed-off-by: Michael S. Tsirkin

virtio: assert 32 bit features in transports

2014-12-09T10:05:24Z

At this point, no transports set any of the high 32 feature bits. Since transports generally can't (yet) cope with such bits, add BUG_ON checks to make sure they are not set by mistake. Based on rproc patch by Rusty. Signed-off-by: Rusty Russell Signed-off-by: Michael S. Tsirkin Reviewed-by: David Hildenbrand Reviewed-by: Cornelia Huck