user/sven/linux.git/drivers/misc/mic, branch v4.9.262

misc: vop: add round_up(x,4) for vring_size to avoid kernel panic

2020-10-29T08:05:43Z

[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ] Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like: 0x90002400: 00000000 00390000 EE010000 0000C0FF Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member. When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue. So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way: 0x90002400: 00000000 00000000 00000039 C0FFEE01 Which will avoid kernel panic when read magic in struct _mic_vring_info. Signed-off-by: Sherry Sun Signed-off-by: Joakim Zhang Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mic: vop: copy data to kernel space then write to io memory

2020-10-29T08:05:43Z

[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ] Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue. Signed-off-by: Sherry Sun Signed-off-by: Joakim Zhang Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: mic: scif: Fix error handling path

2020-10-29T08:05:36Z

[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ] Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it will call pin_user_pages_fast() to map nr_pages. However, pin_user_pages_fast() might fail with a return value -ERRNO. The return value is stored in pinned_pages->nr_pages. which in turn is passed to unpin_user_pages(), which expects pinned_pages->nr_pages >=0, else disaster. Fix this by assigning pinned_pages->nr_pages to 0 if pin_user_pages_fast() returns -ERRNO. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard Cc: Ira Weiny Cc: Dan Carpenter Reviewed-by: John Hubbard Signed-off-by: Souptick Joarder Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

mic: avoid statically declaring a 'struct device'.

2020-01-29T09:24:29Z

[ Upstream commit bc83f79bd2119230888fb8574639d5a51b38f903 ] Generally, declaring a platform device as a static variable is a bad idea and can cause all kinds of problems, in particular with the DMA configuration and lifetime rules. A specific problem we hit here is from a bug in clang that warns about certain (otherwise valid) macros when used in static variables: drivers/misc/mic/card/mic_x100.c:285:27: warning: shift count >= width of type [-Wshift-count-overflow] static u64 mic_dma_mask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ A slightly better way here is to create the platform device dynamically and set the dma mask in the probe function. This avoids the warning and some other problems, but is still not ideal because the device creation should really be separated from the driver, and the fact that the device has no parent means we have to force the dma mask rather than having it set up from the bus that the device is actually on. Fixes: dd8d8d44df64 ("misc: mic: MIC card driver specific changes to enable SCIF") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190712092426.872625-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: mic: fix a DMA pool free failure

2019-11-28T17:28:22Z

[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ] In _scif_prog_signal(), the boolean variable 'x100' is used to indicate whether the MIC Coprocessor is X100. If 'x100' is true, the status descriptor will be used to write the value to the destination. Otherwise, a DMA pool will be allocated for this purpose. Specifically, if the DMA pool is allocated successfully, two memory addresses will be returned. One is for the CPU and the other is for the device to access the DMA pool. The former is stored to the variable 'status' and the latter is stored to the variable 'src'. After the allocation, the address in 'src' is saved to 'status->src_dma_addr', which is actually in the DMA pool, and 'src' is then modified. Later on, if an error occurs, the execution flow will transfer to the label 'dma_fail', which will check 'x100' and free up the allocated DMA pool if 'x100' is false. The point here is that 'status->src_dma_addr' is used for freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in the DMA pool. And thus, the device is able to modify this data. This can potentially cause failures when freeing up the DMA pool because of the modified device address. This patch avoids the above issue by using the variable 'src' (with necessary calculation) to free up the DMA pool. Signed-off-by: Wenwen Wang Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: mic/scif: fix copy-paste error in scif_create_remote_lookup

2018-12-05T18:42:41Z

commit 6484a677294aa5d08c0210f2f387ebb9be646115 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by: YueHaibing Cc: stable Signed-off-by: Greg Kroah-Hartman

misc: mic: SCIF Fix scif_get_new_port() error handling

2018-09-19T20:47:12Z

[ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

misc: mic: double free on ioctl error path

2017-06-24T05:11:16Z

commit 816c9311f1144a03da1fdc4feb2f6b0d3299fca0 upstream. This function only has one caller. Freeing "vdev" here leads to a use after free bug. There are several other error paths in this function but this is the only one which frees "vdev". It looks like the kfree() can be safely removed. Fixes: 61e9c905df78 ("misc: mic: Enable VOP host side functionality") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

mm: replace get_user_pages() write/force parameters with gup_flags

2016-10-19T15:11:43Z

This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Christian König Acked-by: Jesper Nilsson Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds

misc: mic: scif: use vma_pages().

2016-08-30T12:45:50Z

Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: Muhammad Falak R Wani Signed-off-by: Greg Kroah-Hartman