user/sven/linux.git/drivers/misc, branch v4.18.8

vmw_balloon: fix VMCI use when balloon built into kernel

2018-09-09T08:32:35Z

commit c3cc1b0fc27508da53fe955a3b23d03964410682 upstream. Currently, when all modules, including VMCI and VMware balloon are built into the kernel, the initialization of the balloon happens before the VMCI is probed. As a result, the balloon fails to initialize the VMCI doorbell, which it uses to get asynchronous requests for balloon size changes. The problem can be seen in the logs, in the form of the following message: "vmw_balloon: failed to initialize vmci doorbell" The driver would work correctly but slightly less efficiently, probing for requests periodically. This patch changes the balloon to be initialized using late_initcall() instead of module_init() to address this issue. It does not address a situation in which VMCI is built as a module and the balloon is built into the kernel. Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman

vmw_balloon: VMCI_DOORBELL_SET does not check status

2018-09-09T08:32:35Z

commit ce664331b2487a5d244a51cbdd8cb54f866fbe5d upstream. When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for some reason it does not consider the status and looks at the result. However, the hypervisor does not update the result - it updates the status. This might cause VMCI doorbell not to be enabled, resulting in degraded performance. Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman

vmw_balloon: do not use 2MB without batching

2018-09-09T08:32:35Z

commit 5081efd112560d3febb328e627176235b250d59d upstream. If the hypervisor sets 2MB batching is on, while batching is cleared, the balloon code breaks. In this case the legacy mechanism is used with 2MB page. The VM would report a 2MB page is ballooned, and the hypervisor would only take the first 4KB. While the hypervisor should not report such settings, make the code more robust by not enabling 2MB support without batching. Fixes: 365bd7ef7ec8e ("VMware balloon: Support 2m page ballooning.") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman

vmw_balloon: fix inflation of 64-bit GFNs

2018-09-09T08:32:34Z

commit 09755690c6b7c1eabdc4651eb3b276f8feb1e447 upstream. When balloon batching is not supported by the hypervisor, the guest frame number (GFN) must fit in 32-bit. However, due to a bug, this check was mistakenly ignored. In practice, when total RAM is greater than 16TB, the balloon does not work currently, making this bug unlikely to happen. Fixes: ef0f8f112984 ("VMware balloon: partially inline vmballoon_reserve_page.") Cc: stable@vger.kernel.org Reviewed-by: Xavier Deguillard Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman

ocxl: Fix page fault handler in case of fault on dying process

2018-09-09T08:32:31Z

commit d497ebf5fb3a026c0817f8c96cde578787f24093 upstream. If a process exits without doing proper cleanup, there's a window where an opencapi device can try to access the memory of the dying process and may trigger a page fault. That's an expected scenario and the ocxl driver holds a reference on the mm_struct of the process until the opencapi device is notified of the process exiting. However, if mm_users is already at 0, i.e. the address space of the process has already been destroyed, the driver shouldn't try resolving the page fault, as it will fail, but it can also try accessing already freed data. It is fixed by only calling the bottom half of the page fault handler if mm_users is greater than 0 and get a reference on mm_users instead of mm_count. Otherwise, we can safely return a translation fault to the device, as its associated memory context is being removed. The opencapi device will be properly cleaned up shortly after when closing the file descriptors. Fixes: 5ef3166e8a32 ("ocxl: Driver code for 'generic' opencapi devices") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Frederic Barrat Reviewed-By: Alastair D'Silva Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

cxl: Fix wrong comparison in cxl_adapter_context_get()

2018-09-09T08:32:31Z

commit ef6cb5f1a048fdf91ccee6d63d2bfa293338502d upstream. Function atomic_inc_unless_negative() returns a bool to indicate success/failure. However cxl_adapter_context_get() wrongly compares the return value against '>=0' which will always be true. The patch fixes this comparison to '==0' there by also fixing this compile time warning: drivers/misc/cxl/main.c:290 cxl_adapter_context_get() warn: 'atomic_inc_unless_negative(&adapter->contexts_num)' is unsigned Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists") Cc: stable@vger.kernel.org # v4.9+ Reported-by: Dan Carpenter Signed-off-by: Vaibhav Jain Acked-by: Andrew Donnellan Acked-by: Frederic Barrat Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

mei: don't update offset in write

2018-09-05T07:29:40Z

commit a103af1b64d74853a5e08ca6c86aeb0e5c6ca4f1 upstream. MEI enables writes of complete messages only while read can be performed in parts, hence write should not update the file offset to not break interleaving partial reads with writes. Cc: Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

misc: sram: fix resource leaks in probe error path

2018-08-22T05:43:43Z

commit f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream. Make sure to disable clocks and deregister any exported partitions before returning on late probe errors. Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak on error path"), partitions are deliberately exported before enabling the clock so we stick to that logic here. A follow up patch will address this. Cc: stable # 4.9 Cc: Alexandre Belloni Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2018-07-22T19:04:51Z

Pull vfs fixes from Al Viro: "Fix several places that screw up cleanups after failures halfway through opening a file (one open-coding filp_clone_open() and getting it wrong, two misusing alloc_file()). That part is -stable fodder from the 'work.open' branch. And Christoph's regression fix for uapi breakage in aio series; include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel definition of sigset_t, the reason for doing so in the first place had been bogus - there's no need to expose struct __aio_sigset in aio_abi.h at all" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: don't expose __aio_sigset in uapi ocxlflash_getfile(): fix double-iput() on alloc_file() failures cxl_getfile(): fix double-iput() on alloc_file() failures drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()

cxl_getfile(): fix double-iput() on alloc_file() failures

2018-07-11T03:29:03Z

Doing iput() after path_put() is wrong. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro