user/sven/linux.git/drivers/misc, branch v5.15.185

mei: me: add panther lake H DID

2025-05-02T05:44:31Z

commit 86ce5c0a1dec02e21b4c864b2bc0cc5880a2c13c upstream. Add Panther Lake H device id. Cc: stable Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman

misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type

2025-05-02T05:44:17Z

commit baaef0a274cfb75f9b50eab3ef93205e604f662c upstream. There are two variables that indicate the interrupt type to be used in the next test execution, "irq_type" as global and "test->irq_type". The global is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). The type set in this function isn't reflected in the global "irq_type", so ioctl(PCITEST_GET_IRQTYPE) returns the previous type. As a result, the wrong type is displayed in old version of "pcitest" as follows: - Result of running "pcitest -i 0" SET IRQ TYPE TO LEGACY: OKAY - Result of running "pcitest -I" GET IRQ TYPE: MSI Whereas running the new version of "pcitest" in kselftest results in an error as follows: # RUN pci_ep_basic.LEGACY_IRQ_TEST ... # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1) # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type Fix this issue by propagating the current type to the global "irq_type". Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Signed-off-by: Kunihiko Hayashi [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Niklas Cassel Reviewed-by: Manivannan Sadhasivam Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250225110252.28866-5-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi Signed-off-by: Greg Kroah-Hartman

misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error

2025-05-02T05:44:17Z

commit 919d14603dab6a9cf03ebbeb2cfa556df48737c8 upstream. There are two variables that indicate the interrupt type to be used in the next test execution, global "irq_type" and "test->irq_type". The former is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). In the pci_endpoint_test_request_irq(), since this global variable is referenced when an error occurs, the unintended error message is displayed. For example, after running "pcitest -i 2", the following message shows "MSI 3" even if the current IRQ type becomes "MSI-X": pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3 SET IRQ TYPE TO MSI-X: NOT OKAY Fix this issue by using "test->irq_type" instead of global "irq_type". Cc: stable@vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Reviewed-by: Manivannan Sadhasivam Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Signed-off-by: Kunihiko Hayashi Signed-off-by: Greg Kroah-Hartman

misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error

2025-05-02T05:44:17Z

commit f6cb7828c8e17520d4f5afb416515d3fae1af9a9 upstream. After devm_request_irq() fails with error in pci_endpoint_test_request_irq(), the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs have been released. However, some requested IRQs remain unreleased, so there are still /proc/irq/* entries remaining, and this results in WARN() with the following message: remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0' WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c To solve this issue, set the number of remaining IRQs to test->num_irqs, and release IRQs in advance by calling pci_endpoint_test_release_irq(). Cc: stable@vger.kernel.org Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Reviewed-by: Manivannan Sadhasivam Signed-off-by: Kunihiko Hayashi Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Signed-off-by: Kunihiko Hayashi Signed-off-by: Greg Kroah-Hartman

eeprom: digsy_mtc: Make GPIO lookup table match the device

2025-03-13T11:51:10Z

commit 038ef0754aae76f79b147b8867f9250e6a976872 upstream. The dev_id value in the GPIO lookup table must match to the device instance name, which in this case is combined of name and platform device ID, i.e. "spi_gpio.1". But the table assumed that there was no platform device ID defined, which is wrong. Fix the dev_id value accordingly. Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") Cc: stable Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

mei: me: add panther lake P DID

2025-03-13T11:51:10Z

commit a8e8ffcc3afce2ee5fb70162aeaef3f03573ee1e upstream. Add Panther Lake P device id. Cc: stable Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman

Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"

2025-03-13T11:51:07Z

commit 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843 upstream. This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772. This commit was found responsible for issues with SD card recognition, as users had to re-insert their cards in the readers and wait for a while. As for some people the SD card was involved in the boot process it also caused boot failures. Cc: stable@vger.kernel.org Link: https://bbs.archlinux.org/viewtopic.php?id=303321 Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection") Reported-by: qf Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu Signed-off-by: Christian Heusel Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu Signed-off-by: Greg Kroah-Hartman

misc: fastrpc: Fix registered buffer page address

2025-03-13T11:50:33Z

commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream. For registered buffers, fastrpc driver sends the buffer information to remote subsystem. There is a problem with current implementation where the page address is being sent with an offset leading to improper buffer address on DSP. This is leads to functional failures as DSP expects base address in page information and extracts offset information from remote arguments. Mask the offset and pass the base page address to DSP. This issue is observed is a corner case when some buffer which is registered with fastrpc framework is passed with some offset by user and then the DSP implementation tried to read the data. As DSP expects base address and takes care of offsetting with remote arguments, passing an offsetted address will result in some unexpected data read in DSP. All generic usecases usually pass the buffer as it is hence is problem is not usually observed. If someone tries to pass offsetted buffer and then tries to compare data at HLOS and DSP end, then the ambiguity will be observed. Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

drivers/card_reader/rtsx_usb: Restore interrupt based detection

2025-03-13T11:50:15Z

commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream. This commit reintroduces interrupt-based card detection previously used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code"). Reintroducing this mechanism fixes presence detection for certain card readers, which with the current driver, will taken approximately 20 seconds to enter S3 as `mmc_rescan` has to be frozen. Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code") Cc: stable@vger.kernel.org Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Signed-off-by: Sean Rhodes Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems Signed-off-by: Greg Kroah-Hartman

misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle

2024-12-14T18:51:42Z

[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko Signed-off-by: Parker Newman Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin