user/sven/linux.git/drivers/mmc/Makefile, branch v3.3.5

mmc: sdhci-pci: add platform data

2012-01-12T04:58:47Z

Add a means of getting platform data for the SDHCI PCI devices. The data is stored against the slot not the device in order to support multi-slot devices. The data allows platform-specific setup (such as getting GPIO numbers from firmware or setting up wl12xx for SDIO) to be done in platform support files instead of the sdhci-pci driver. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: Makefile: Fix EXTRA_CFLAGS assignment

2010-10-23T13:11:15Z

The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing anything because this flag only has effect on sources at the same level as the makefile (i.e., per directory). Since card/, core/, and host/ rely on MMC_DEBUG, the subdir-ccflags-y variant seems to be the appropriate choice. Signed-off-by: matt mooney Signed-off-by: Chris Ball

mmc: Move core functions to subdir

2007-05-01T11:04:18Z

Create a "core" subdirectory to house the central bus handling functions. Signed-off-by: Pierre Ossman

mmc: Move host and card drivers to subdirs

2007-05-01T11:04:17Z

Clean up the drivers/mmc directory by moving card and host drivers into subdirectories. Signed-off-by: Pierre Ossman

mmc: Move queue functions to mmc_block

2007-05-01T11:04:16Z

The mmc block queue functions are tailored for the mmc_block driver, so move those functions into that module. Signed-off-by: Pierre Ossman

[ARM] 3963/1: AT91: Update configuration files

2006-12-01T16:56:43Z

A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor Signed-off-by: Russell King

[PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile

2006-10-04T14:55:14Z

Signed-off-by: Alex Dubov Cc: Daniel Qarras Acked-by: Pierre Ossman Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

2006-09-30T18:52:31Z

Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells Signed-off-by: Jens Axboe

[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1

2006-04-02T18:27:07Z

Patch from Pavel Pisa This patch adds support of i.MX/MX1 SD/MMC controller. It has been significantly redesigned from the original Sascha Hauer's version to support scatter-gather DMA, to conform to latest Pierre Ossman's and Russell King's MMC-SD Linux 2.6.x infrastructure. The handling of all events has been moved to the softirq context and is designed with no busy-looping in mind. Unfortunately some controller bugs has to be overcome by limited looping about 2-20 usec but these are observed only for initial card recognition phase. There are still some missing/missed IRQs problems under heavy load. Help of somebody with access to the full SDHC design information is probably necessary. Regenerated against 2.6.16-git-060402 to solve clash with other patches. Signed-off-by: Pavel Pisa Acked-by: Sascha Hauer Signed-off-by: Russell King

[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)

2006-04-02T18:18:51Z

Patch from Andrew Victor This patch adds support for the MMC/SD card interface on the Atmel AT91RM9200 processor. Original driver was by Nick Randell, but a number of people have subsequently worked on it. It's currently maintained by Malcolm Noyes. Signed-off-by: Andrew Victor Signed-off-by: Russell King