user/sven/linux.git/drivers/mmc/core, branch v3.2.18

mmc: fixes for eMMC v4.5 sanitize operation

2012-05-11T12:13:52Z

commit 283028122db37621b124f079ca8eae5b64807ad4 upstream. eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball Signed-off-by: Ben Hutchings

mmc: fixes for eMMC v4.5 discard operation

2012-05-11T12:13:51Z

commit 7194efb8f063ee3aa0cb50d9002348887e68ec10 upstream. eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball Signed-off-by: Ben Hutchings

mmc: core: Fix voltage select in DDR mode

2012-01-26T00:13:27Z

commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S Acked-by: Subhash Jadavani Acked-by: Philip Rakity Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

Revert "mmc: enable runtime PM by default"

2011-12-19T23:51:38Z

When SDIO runtime PM was originally introduced, we immediately faced two regressions with two different chipsets, and in response decided not to enable it by default. With the recent work on the 8686 we hoped we found all the gotchas, so 08da834 did make sense (at least experimentally). Unfortunately we now see that some setups out there still refuse to work when SDIO runtime PM is enabled by default (see http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously we can't live with these kind of regressions. This reverts commit 08da834a24312157f512224691ad1fddd11c1073. Signed-off-by: Ohad Ben-Cohen Cc: Daniel Drake Signed-off-by: Chris Ball

mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined

2011-12-10T21:18:39Z

mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma Acked-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Chris Ball

mmc: core: Fix typo at mmc_card_sleep

2011-12-10T21:18:37Z

Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball

mmc: core: Fix power_off_notify during suspend

2011-12-10T21:18:36Z

The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S Signed-off-by: Chris Ball

mmc: core: Fix setting power notify state variable for non-eMMC

2011-12-10T21:18:36Z

This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S Acked-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: core: Add quirk for long data read time

2011-12-10T21:18:35Z

Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball

mmc: Fix implicit use of stat.h header in associated files

2011-10-31T23:32:07Z

Once the implicit use of module.h is prevented, these files will fail to find the stat.h header content. Fix up the implicit usage expectations in advance of the cleanup. Signed-off-by: Paul Gortmaker