user/sven/linux.git/drivers/mmc/host, branch v3.3.6

mmc: unbreak sdhci-esdhc-imx on i.MX25

2012-04-27T17:16:35Z

commit b89152824f993a9572b47eb31f4579feadeac34c upstream. This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by: Eric Bénard Acked-by: Wolfram Sang Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: refine non-removable card checking for card detection

2012-04-27T17:16:35Z

commit 87b87a3fc0eec58d95e4216392f889a26439ad22 upstream. Commit c79396c191bc19 ("mmc: sdhci: prevent card detection activity for non-removable cards") disables card detection where the cards are marked as non-removable. This makes sense, but the implementation detail of calling mmc_card_is_removable() causes some problems, because mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root filesystem is stored on SD, but we also have external SD card slots where we want automatic card detection. Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE, which is defined to mean that the card is *really* nonremovable. This could be revisited in future if we find a way to improve CONFIG_MMC_UNSAFE_RESUME semantics. Signed-off-by: Daniel Drake Acked-by: Chuanxiao Dong Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: correct data timeout computation

2012-04-13T16:13:55Z

commit 66292ad92c6d3f2f1c137a1c826b331ca8595dfd upstream. The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-dove: Fix compile error by including module.h

2012-04-13T16:13:55Z

commit 8c2fc8e413ecc2c96b696e28d4eb1bc6cee8dc84 upstream. This patch fixes a compile error in drivers/mmc/host/sdhci-dove.c by including the linux/module.h file. Signed-off-by: Alf Høgemark Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size

2012-03-04T17:25:14Z

On a system with large pages (64k in my case), the following BUG is triggered in MMC core: [ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()! [ 2.338102] Kernel panic - not syncing: BUG! [ 2.338155] Call trace: [ 2.338228] [] dump_backtrace+0x0/0x120 [ 2.338317] [] dump_stack+0x14/0x1c [ 2.338403] [] panic+0xbc/0x1f0 [ 2.338498] [] mmc_start_request+0x154/0x184 [ 2.338600] [] mmc_start_req+0x110/0x140 [ 2.338701] [] mmc_blk_issue_rw_rq+0x7c/0x39c [ 2.338804] [] mmc_blk_issue_rq+0x1c0/0x468 [ 2.338905] [] mmc_queue_thread+0x68/0x118 [ 2.338995] [] kthread+0x84/0x8c This is because of a 64k request with a max_req_size of 64k-1 bytes. The following patch fixes the problem by limiting the max_blk_count such that max_blk_count * max_blk_size == max_req_size. I couldn't pursuade the compiler to emit a shift instead of a div without encoding the shift explicitly. Signed-off-by: Will Deacon Signed-off-by: Chris Ball

mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5

2012-03-04T17:25:02Z

On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Cc: Signed-off-by: Chris Ball

mmc: atmel-mci: don't use dma features when using DMA with no chan available

2012-03-02T21:06:40Z

Some callbacks are set too early -- i.e. we can have dma capabilities but we can't get a dma channel. So wait to get the dma channel before setting callbacks and change logs consequently. Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre [Should be applied to 3.2-stable.] Cc: Signed-off-by: Chris Ball

mmc: dw_mmc: Fix PIO mode with support of highmem

2012-02-14T01:39:05Z

Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [] lr : [] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [] (dw_mci_pull_data32+0x0/0x9c) from [] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [] (dw_mci_read_data_pio+0x0/0x1f0) from [] (dw_mci_interrupt+0xfc/0x4a4) [] (dw_mci_interrupt+0x0/0x4a4) from [] (handle_irq_event_percpu+0x7c/0x1b4) [] (handle_irq_event_percpu+0x0/0x1b4) from [] (handle_irq_event+0x44/0x64) [] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [] (handle_fasteoi_irq+0x0/0x124) from [] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [] (generic_handle_irq+0x0/0x38) from [] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [] (asm_do_IRQ+0x0/0xe0) from [] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon Acked-by: Will Newton Cc: stable Signed-off-by: Chris Ball

mmc: atmel-mci: save and restore sdioirq when soft reset is performed

2012-02-14T01:39:05Z

Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: Ludovic Desroches Cc: stable Signed-off-by: Nicolas Ferre Signed-off-by: Chris Ball

mmc: sh_mmcif: fix late delayed work initialisation

2012-02-14T01:39:03Z

If the driver is loaded with a card in the slot, mmc_add_host() will schedule an immediate card-detection work, which will start IO and wait for command completion. Usually the kernel first returns to the sh_mmcif probe function, lets it finish and only then schedules the rescan work. But sometimes, expecially under heavy system load, the work will be scheduled immediately before returning to the probe method. In this case it is important for the driver to be fully prepared for IO. For sh_mmcif this means, that also the timeout work has to be initialised before calling mmc_add_host(). It is also better to prepare interrupts beforehand. Besides, since mmc_add_host() does card-detection itself, there is no need to do it again immediately afterwards. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball