user/sven/linux.git/drivers/mmc/host, branch v3.4.70

mmc: tmio_mmc_dma: fix PIO fallback on SDHI

2013-09-27T00:15:51Z

commit f936f9b67b7f8c2eae01dd303a0e90bd777c4679 upstream. I'm testing SH-Mobile SDHI driver in DMA mode with a new DMA controller using 'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back to PIO but all commands time out after that. It turned out that the fallback code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers to them cleared, so that the function bails out early instead of clearing the DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit 162f43e31c5a376ec16336e5d0ac973373d54c89 (mmc: tmio: fix a deadlock). Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in tmio_mmc_start_dma_{rx|tx}() helps. Signed-off-by: Sergei Shtylyov Acked-by: Guennadi Liakhovetski Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: pio hang on block errors

2013-05-08T02:51:57Z

commit bdbc5d0c60f3e9de3eeccf1c1a18bdc11dca62cc upstream. The driver is doing, by default, multi-block reads. When a block error occurs, card/block.c instigates a single block read: "mmcblk0: retrying using single block read". It leaves the sg chain intact and just changes the length attribute for the first sg entry and the overall sg_len parameter. When atmci_read_data_pio is called to read the single block of data it ignores the sg_len and expects to read more than 512 bytes as it sees there are multiple items in the sg list. No more data comes as the controller has only been commanded to get one block. Signed-off-by: Terry Barnaby Acked-by: Ludovic Desroches Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload

2013-05-08T02:51:57Z

commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream. Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add pdc support and runtime capabilities detection") which removed the need for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the compile guards around dma_release_channel() in remove(). Consequently, DMA is always enabled (if supported), but the DMA-channel is not released on module unload unless the DMA-config option is selected. Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely. Signed-off-by: Johan Hovold Acked-by: Ludovic Desroches Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-esdhc-imx: fix host version read

2013-02-28T14:59:05Z

commit ef4d0888bb7e1b963880f086575081c3d39cad2d upstream. When commit 95a2482 (mmc: sdhci-esdhc-imx: add basic imx6q usdhc support) works around host version issue on imx6q, it gets the register address fixup "reg ^= 2" lost for imx25/35/51/53 esdhc. Thus, the controller version on these SoCs is wrongly identified as v1 while it's actually v2. Add the address fixup back and take a different approach to correct imx6q host version, so that the host version read gets back to work for all SoCs. Signed-off-by: Shawn Guo Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sh-mmcif: avoid oops on spurious interrupts (second try)

2012-12-17T18:37:43Z

commit 91ab252ac5a5c3461dd6910797611e9172626aed upstream. On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi Signed-off-by: Guennadi Liakhovetski Tested-by: Tetsuyuki Kobayashi Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"

2012-12-17T18:37:43Z

commit 6984f3c31bb57cb7491dbec1be44b74bd00f4648 upstream. This reverts commit 8464dd52d3198dd05, which was a misapplied debugging version of the patch, not the final patch itself. Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-s3c: fix the wrong number of max bus clocks

2012-12-03T19:47:23Z

commit 5feb54a1ab91a237e247c013b8c4fb100ea347b1 upstream. We can use up to four bus-clocks; but on module remove, we didn't disable the fourth bus clock. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: fix NULL dereference in sdhci_request() tuning

2012-11-17T21:16:33Z

commit 14efd957209461bbdf285bf0d67e931955d04a4c upstream. Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: sh-mmcif: avoid oops on spurious interrupts

2012-10-12T20:38:59Z

commit 8464dd52d3198dd05cafb005371d76e5339eb842 upstream. On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

mmc: omap_hsmmc: Pass on the suspend failure to the PM core

2012-10-12T20:38:59Z

commit c4c8eeb4df00aabb641553d6fbcd46f458e56cd9 upstream. In some cases mmc_suspend_host() is not able to claim the host and proceed with the suspend process. The core returns -EBUSY to the host controller driver. Unfortunately, the host controller driver does not pass on this information to the PM core and hence the system suspend process continues. ret = mmc_suspend_host(host->mmc); if (ret) { host->suspended = 0; if (host->pdata->resume) { ret = host->pdata->resume(dev, host->slot_id); The return status from mmc_suspend_host() is overwritten by return status from host->pdata->resume. So the original return status is lost. In these cases the MMC core gets to an unexpected state during resume and multiple issues related to MMC crop up. 1. Host controller driver starts accessing the device registers before the clocks are enabled which leads to a prefetch abort. 2. A file copy thread which was launched before suspend gets stuck due to the host not being reclaimed during resume. To avoid such problems pass on the -EBUSY status to the PM core from the host controller driver. With this change, MMC core suspend might still fail but it does not end up making the system unusable. Suspend gets aborted and the user can try suspending the system again. Signed-off-by: Vaibhav Bedia Signed-off-by: Hebbar, Gururaja Acked-by: Venkatraman S Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman