user/sven/linux.git/drivers/mtd, branch v4.16.1

mtd: jedec_probe: Fix crash in jedec_read_mfr()

2018-03-29T17:29:06Z

It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon

mtd: nand: atmel: Fix get_sectorsize() function

2018-03-29T17:29:06Z

get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: Reported-by: Olivier Schonken Signed-off-by: Boris Brezillon Reviewed-by: Richard Weinberger Acked-by: Nicolas Ferre Tested-by: Olivier Schonken

mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0

2018-03-21T09:22:28Z

Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon

mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0

2018-03-21T09:18:34Z

Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jagdish Gediya Signed-off-by: Boris Brezillon

mtd: nand: fsl_ifc: Fix nand waitfunc return value

2018-03-21T09:13:13Z

As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon

mtdchar: fix usage of mtd_ooblayout_ecc()

2018-03-19T09:28:11Z

Section was not properly computed. The value of OOB region definition is always ECC section 0 information in the OOB area, but we want to get all the ECC bytes information, so we should call mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE. Fixes: c2b78452a9db ("mtd: use mtd_ooblayout_xxx() helpers where appropriate") Cc: Signed-off-by: OuYang ZhiZhong Signed-off-by: Boris Brezillon

mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA

2018-02-12T09:57:20Z

If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/mtd/nand/marvell_nand.ko] undefined! Add a dependency on HAS_DMA to fix this. Fixes: 02f26ecf8c772751 ("mtd: nand: add reworked Marvell NAND controller driver") Signed-off-by: Geert Uytterhoeven Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon

mtd: nand: vf610: set correct ooblayout

2018-02-12T09:56:36Z

With commit 3cf32d180227 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout") Cc: # v4.12+ Signed-off-by: Stefan Agner Signed-off-by: Boris Brezillon

Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping

2018-01-31T19:32:27Z

Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...

Merge tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifs

2018-01-29T21:31:47Z

Pull UBI/UBIFS updates from Richard Weinberger: - use the new fscrypt APIs - a fix for a Fastmap issue - other minor bug fixes * tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifs: ubi: block: Fix locking for idr_alloc/idr_remove mtd: ubi: wl: Fix error return code in ubi_wl_init() ubi: Fix copy/paste error in function documentation ubi: Fastmap: Fix typo ubifs: remove error message in ubifs_xattr_get ubi: fastmap: Erase outdated anchor PEBs during attach ubifs: switch to fscrypt_prepare_setattr() ubifs: switch to fscrypt_prepare_lookup() ubifs: switch to fscrypt_prepare_rename() ubifs: switch to fscrypt_prepare_link() ubifs: switch to fscrypt_file_open() ubi: fastmap: Clean up the initialization of pointer p ubi: fastmap: Use kmem_cache_free to deallocate memory ubi: Fix race condition between ubi volume creation and udev mtd: ubi: Use 'max_bad_blocks' to compute bad_peb_limit if available ubifs: Fix uninitialized variable in search_dh_cookie()