user/sven/linux.git/drivers/mtd, branch v4.4.130

ubi: Reject MLC NAND

2018-04-24T07:32:05Z

commit b5094b7f135be34630e3ea8a98fa215715d0f29d upstream. While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger Acked-by: Boris Brezillon Acked-by: Artem Bityutskiy Signed-off-by: Greg Kroah-Hartman

ubi: Fix error for write access

2018-04-24T07:32:05Z

commit 78a8dfbabbece22bee58ac4cb26cab10e7a19c5d upstream. When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a33eec (UBI: R/O block driver on top of UBI volumes) Signed-off-by: Romain Izard Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: fastmap: Don't flush fastmap work on detach

2018-04-24T07:32:05Z

commit 29b7a6fa1ec07e8480b0d9caf635a4498a438bf4 upstream. At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by: Martin Townsend Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

mtd: jedec_probe: Fix crash in jedec_read_mfr()

2018-04-08T09:51:55Z

commit 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream. It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: nand: fsl_ifc: Fix nand waitfunc return value

2018-03-28T16:40:15Z

commit fa8e6d58c5bc260f4369c6699683d69695daed0a upstream. As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya Reviewed-by: Prabhakar Kushwaha Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman

mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()

2018-03-22T08:23:28Z

[ Upstream commit df467899da0b71465760b4e35127bce837244eee ] Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE and a column address and expect the controller to only send address cycles. Right now, the default ->cmdfunc() implementations provided by the core do not filter out the command cycle in this case and forwards the request to the controller driver through the ->cmd_ctrl() method. The thing is, NAND controller drivers can get this wrong and send a command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is -1, and the command field is usually casted to an u8, we end up sending the 0xFF command which is actually a RESET operation. Add conditions in nand_command[_lp]() functions to sending the initial command cycle when command == NAND_CMD_NONE. Signed-off-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ubi: Fix race condition between ubi volume creation and udev

2018-03-18T10:17:52Z

commit a51a0c8d213594bc094cb8e54aad0cb6d7f7b9a6 upstream. Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by: Clay McClure Cc: Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM

2018-03-03T09:19:41Z

[ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ] When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by: Sascha Hauer Reviewed-by: Richard Weinberger Acked-by: Boris Brezillon Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mtd: cfi: enforce valid geometry configuration

2018-02-25T10:03:46Z

commit f5f92b36fbbb8ac7d70ff5fa39ec2637cce3094c upstream. MTD allows compile-time configuration of the possible CFI geometry settings that are allowed by the kernel, but that includes a couple of invalid configurations, where no bank width or no interleave setting is allowed. These are then caught with a compile-time warning: include/linux/mtd/cfi.h:76:2: warning: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. include/linux/mtd/map.h:145:2: warning: #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" This is a bit annoying for randconfig tests, and can be avoided if we change the Kconfig logic to always select the simplest configuration when no other one is enabled. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Greg Kroah-Hartman

mtd: sh_flctl: pass FIFO as physical address

2018-02-25T10:03:46Z

commit 1873315fb156cbc8e46f28e8b128f17ff6c31728 upstream. By convention, the FIFO address we pass using dmaengine_slave_config is a physical address in the form that is understood by the DMA engine, as a dma_addr_t, phys_addr_t or resource_size_t. The sh_flctl driver however passes a virtual __iomem address that gets cast to dma_addr_t in the slave driver. This happens to work on shmobile because that platform sets up an identity mapping for its MMIO regions, but such code is not portable to other platforms, and prevents us from ever changing the platform mapping or reusing the driver on other architectures like ARM64 that might not have the mapping. We also get a warning about a type mismatch for the case that dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set: drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma': drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl); This changes the driver to instead pass the physical address of the FIFO that is extracted from the MMIO resource, making the code more portable and avoiding the warning. Signed-off-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Greg Kroah-Hartman