user/sven/linux.git/drivers/mtd, branch v6.7.9

mtd: rawnand: marvell: fix layouts

2024-03-06T14:53:55Z

commit e6a30d0c48a1e8a68f1cc413bee65302ab03ddfb upstream. The check in nand_base.c, nand_scan_tail() : has the following code: (ecc->steps * ecc->size != mtd->writesize) which fails for some NAND chips. Remove ECC entries in this driver which are not integral multiplications, and adjust the number of chunks for entries which fails the above calculation so it will calculate correctly (this was previously done automatically before the check and was removed in a later commit). Fixes: 68c18dae6888 ("mtd: rawnand: marvell: add missing layouts") Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: spinand: gigadevice: Fix the get ecc status issue

2024-03-06T14:53:48Z

[ Upstream commit 59950610c0c00c7a06d8a75d2ee5d73dba4274cf ] Some GigaDevice ecc_get_status functions use on-stack buffer for spi_mem_op causes spi_mem_check_op failing, fix the issue by using spinand scratchbuf. Fixes: c40c7a990a46 ("mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG") Signed-off-by: Han Xu Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231108150701.593912-1-han.xu@nxp.com Signed-off-by: Sasha Levin

mtd: rawnand: Clarify conditions to enable continuous reads

2024-02-01T00:20:55Z

commit 828f6df1bcba7f64729166efc7086ea657070445 upstream. The current logic is probably fine but is a bit convoluted. Plus, we don't want partial pages to be part of the sequential operation just in case the core would optimize the page read with a subpage read (which would break the sequence). This may happen on the first and last page only, so if the start offset or the end offset is not aligned with a page boundary, better avoid them to prevent any risk. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-5-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Prevent sequential reads with on-die ECC engines

2024-02-01T00:20:55Z

commit a62c4597953fe54c6af04166a5e2872efd0e1490 upstream. Some devices support sequential reads when using the on-die ECC engines, some others do not. It is a bit hard to know which ones will break other than experimentally, so in order to avoid such a difficult and painful task, let's just pretend all devices should avoid using this optimization when configured like this. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-4-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Fix core interference with sequential reads

2024-02-01T00:20:55Z

commit 7c9414c870c027737d0f2ed7b0ed10f26edb1c61 upstream. A couple of reports pointed at some strange failures happening a bit randomly since the introduction of sequential page reads support. After investigation it turned out the most likely reason for these issues was the fact that sometimes a (longer) read might happen, starting at the same page that was read previously. This is optimized by the raw NAND core, by not sending the READ_PAGE command to the NAND device and just reading out the data in a local cache. When this page is also flagged as being the starting point for a sequential read, it means the page right next will be accessed without the right instructions. The NAND chip will be confused and will not output correct data. In order to avoid such situation from happening anymore, we can however handle this case with a bit of additional logic, to postpone the initialization of the read sequence by one page. Reported-by: Alexander Shiyan Closes: https://lore.kernel.org/linux-mtd/CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com/ Reported-by: Måns Rullgård Closes: https://lore.kernel.org/linux-mtd/yw1xfs6j4k6q.fsf@mansr.com/ Reported-by: Martin Hundebøll Closes: https://lore.kernel.org/linux-mtd/9d0c42fcde79bfedfe5b05d6a4e9fdef71d3dd52.camel@geanix.com/ Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-3-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Prevent crossing LUN boundaries during sequential reads

2024-02-01T00:20:54Z

commit bbcd80f53a5e8c27c2511f539fec8c373f500cf4 upstream. The ONFI specification states that devices do not need to support sequential reads across LUN boundaries. In order to prevent such event from happening and possibly failing, let's introduce the concept of "pause" in the sequential read to handle these cases. The first/last pages remain the same but any time we cross a LUN boundary we will end and restart (if relevant) the sequential read operation. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-2-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: maps: vmu-flash: Fix the (mtd core) switch to ref counters

2024-02-01T00:20:54Z

commit a7d84a2e7663bbe12394cc771107e04668ea313a upstream. While switching to ref counters for track mtd devices use, the vmu-flash driver was forgotten. The reason for reading the ref counter seems debatable, but let's just fix the build for now. Fixes: 19bfa9ebebb5 ("mtd: use refcount to prevent corruption") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312022315.79twVRZw-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231205075936.13831-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: Fix gluebi NULL pointer dereference caused by ftl notifier

2024-01-25T23:44:40Z

[ Upstream commit a43bdc376deab5fff1ceb93dca55bcab8dbdc1d6 ] If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang Reviewed-by: Zhihao Cheng Acked-by: Richard Weinberger Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com Signed-off-by: Sasha Levin

mtd: rawnand: Increment IFC_TIMEOUT_MSECS for nand controller response

2024-01-25T23:44:39Z

[ Upstream commit 923fb6238cb3ac529aa2bf13b3b1e53762186a8b ] Under heavy load it is likely that the controller is done with its own task but the thread unlocking the wait is not scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the controller to respond within allowable timeslice of 1 sec. fsl,ifc-nand 7e800000.nand: Controller is not responding [<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a) [<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c) [<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c) [<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0) Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal Reviewed-by: Andy Shevchenko Signed-off-by: Ronald Monthero Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com Signed-off-by: Sasha Levin

Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2023-11-10T17:19:46Z

Pull MIPS updates from Thomas Bogendoerfer: - removed AR7 platform support - cleanups and fixes * tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: AR7: remove platform watchdog: ar7_wdt: remove driver to prepare for platform removal vlynq: remove bus driver mtd: parsers: ar7: remove support serial: 8250: remove AR7 support arch: mips: remove ReiserFS from defconfig MIPS: lantiq: Remove unnecessary include of MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning MIPS: KVM: Fix a build warning about variable set but not used MIPS: Remove dead code in relocate_new_kernel mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2 mips: dts: ralink: mt7621: define each reset as an item mips: dts: ingenic: Remove unneeded probe-type properties MIPS: loongson32: Remove dma.h and nand.h