user/sven/linux.git/drivers/net/fddi, branch v4.4.153

net/fddi: remove HWM_REVERSE() macro

2015-08-14T04:12:17Z

HWM_REVERSE() macro is unused, remove it. Signed-off-by: yalin wang Signed-off-by: David S. Miller

fddi: print an address with %p format specifier rather than %x

2015-06-07T07:31:22Z

The debug is printing the struct smt_header * address using the %x format specifier. Fix it to use %p instead. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

net: fddi: skfp: smt.c: Remove unused function

2015-01-02T21:36:07Z

Remove the function smt_ifconfig() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: David S. Miller

defxx: Clean up DEFEA resource management

2014-11-21T21:37:13Z

Reserve DEFEA resources according to actual use. There are three regions, for the ESIC ASIC's CSRs, for the discrete Burst Holdoff register, and for the PDQ ASIC's CSRs. The latter is mapped in the memory or port I/O address space depending on configuration. The two formers are hardwired and always mapped in the port I/O address space. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: Disable DEFEA's ESIC I/O decoding on shutdown

2014-11-21T21:37:13Z

Make sure the option card does not respond after shutdown by disabling it via ESIC's Expansion Board Control register. Also disable memory and port I/O decoders, the latter in particular to disable slot-specific I/O decoding that otherwise remains active even in the board is disabled. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: Correct DEFEA's ESIC MMIO decoding

2014-11-21T21:37:13Z

Use ESIC's memory area 1 (MEMCS1) and its Memory Address High Compare and Memory Address Low Compare registers to set up the MMIO range for decoding accesses to PDQ ASIC registers. Previously the PDQ ASIC was thought to be addressable with the memory area 0 (MEMCS0) and its Memory Address Compare and Memory Address Mask registers. The MMIO range allocated for the option card is preset via ECU (EISA Configuration Utility) and can be disabled, so handle such a case gracefully too. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: Fix DEFPA enable error propagation

2014-11-21T21:37:13Z

Correctly propagate the error code from `pci_enable_device' if non zero. Currently a failure of this function is correctly recognized and device initialization abandoned, however a successful completion code returned. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: DEFEA's ESIC port I/O decoding cleanup

2014-09-28T21:22:10Z

Use the slot-specific I/O range for decoding accesses to PDQ ASIC registers (IOCS0) and the discrete Burst Holdoff register (IOCS1) as per the "HD64981F EISA Slave Interface Controller (ESIC)" datasheet. Use disjoint decode ranges now that the assignment of chip selects is known. Update the span of the port I/O resource requested accordingly. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: DEFEA's Burst Holdoff register initialization fix

2014-09-28T21:22:09Z

Use the mask rather than bit number macro to initialize the chip select control bit for PDQ register space decoding in the Burst Holdoff register. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller

defxx: Correct DEFEA's ESIC port I/O accesses

2014-09-28T21:22:09Z

Reverse the order of arguments to `outb', data to write comes first. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller