user/sven/linux.git/drivers/net/hyperv, branch v5.8.11

hv_netvsc: Remove "unlikely" from netvsc_select_queue

2020-09-23T10:59:49Z

commit 4d820543c54c47a2bd3c95ddbf52f83c89a219a0 upstream. When using vf_ops->ndo_select_queue, the number of queues of VF is usually bigger than the synthetic NIC. This condition may happen often. Remove "unlikely" from the comparison of ndev->real_num_tx_queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

2020-08-26T09:49:18Z

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ] netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used. Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues. Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF") Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

hv_netvsc: do not use VF device if link is down

2020-08-19T06:26:56Z

[ Upstream commit 7c9864bbccc23e1812ac82966555d68c13ea4006 ] If the accelerated networking SRIOV VF device has lost carrier use the synthetic network device which is available as backup path. This is a rare case since if VF link goes down, normally the VMBus device will also loose external connectivity as well. But if the communication is between two VM's on the same host the VMBus device will still work. Reported-by: "Shah, Ashish N" Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Stephen Hemminger Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2020-06-03T22:00:05Z

Pull hyper-v updates from Wei Liu: - a series from Andrea to support channel reassignment - a series from Vitaly to clean up Vmbus message handling - a series from Michael to clean up and augment hyperv-tlfs.h - patches from Andy to clean up GUID usage in Hyper-V code - a few other misc patches * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits) Drivers: hv: vmbus: Resolve more races involving init_vp_index() Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug vmbus: Replace zero-length array with flexible-array Driver: hv: vmbus: drop a no long applicable comment hyper-v: Switch to use UUID types directly hyper-v: Replace open-coded variant of %*phN specifier hyper-v: Supply GUID pointer to printf() like functions hyper-v: Use UUID API for exporting the GUID (part 2) asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page drivers: hv: remove redundant assignment to pointer primary_channel scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal hv_utils: Always execute the fcopy and vss callbacks in a tasklet ...

xsk: Remove MEM_TYPE_ZERO_COPY and corresponding code

2020-05-22T00:31:27Z

There are no users of MEM_TYPE_ZERO_COPY. Remove all corresponding code, including the "handle" member of struct xdp_buff. rfc->v1: Fixed spelling in commit message. (Björn) Signed-off-by: Björn Töpel Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200520192103.355233-13-bjorn.topel@gmail.com

hv_netvsc: Add XDP frame size to driver

2020-05-15T04:21:54Z

The hyperv NIC driver does memory allocation and copy even without XDP. In XDP mode it will allocate a new page for each packet and copy over the payload, before invoking the XDP BPF-prog. The positive thing it that its easy to determine the xdp.frame_sz. The XDP implementation for hv_netvsc transparently passes xdp_prog to the associated VF NIC. Many of the Azure VMs are using SRIOV, so majority of the data are actually processed directly on the VF driver's XDP path. So the overhead of the synthetic data path (hv_netvsc) is minimal. Then XDP is enabled on this driver, XDP_PASS and XDP_TX will create the SKB via build_skb (based on the newly allocated page). Now using XDP frame_sz this will provide more skb_tailroom, which netstack can use for SKB coalescing (e.g tcp_try_coalesce -> skb_try_coalesce). V3: Adjust patch desc to be more positive. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Alexei Starovoitov Cc: Wei Liu Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Stephen Hemminger Link: https://lore.kernel.org/bpf/158945339857.97035.10212138582505736163.stgit@firesoul

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-05-07T05:10:13Z

Conflicts were all overlapping changes. Signed-off-by: David S. Miller

net: partially revert dynamic lockdep key changes

2020-05-04T19:05:56Z

This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in " commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov Cc: Taehee Yoo Signed-off-by: Cong Wang Acked-by: Taehee Yoo Signed-off-by: David S. Miller

hv_netvsc: Fix netvsc_start_xmit's return type

2020-05-01T22:24:46Z

netvsc_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but netvsc_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10): [ 5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40 [ 5.916772] Modules linked in: [ 5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1 [ 5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40 [ 5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25 [ 5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246 [ 5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08 [ 5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c [ 5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300 [ 5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000 [ 5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140 [ 5.916784] FS: 0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000 [ 5.916785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0 [ 5.916787] Call Trace: [ 5.916788] [ 5.916790] __cfi_check+0x3ab58/0x450e0 [ 5.916793] ? dev_hard_start_xmit+0x11f/0x160 [ 5.916795] ? sch_direct_xmit+0xf2/0x230 [ 5.916796] ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0 [ 5.916797] ? neigh_resolve_output+0xdf/0x220 [ 5.916799] ? neigh_connected_output.cfi_jt+0x8/0x8 [ 5.916801] ? ip6_finish_output2+0x398/0x4c0 [ 5.916803] ? nf_nat_ipv6_out+0x10/0xa0 [ 5.916804] ? nf_hook_slow+0x84/0x100 [ 5.916807] ? ip6_input_finish+0x8/0x8 [ 5.916807] ? ip6_output+0x6f/0x110 [ 5.916808] ? __ip6_local_out.cfi_jt+0x8/0x8 [ 5.916810] ? mld_sendpack+0x28e/0x330 [ 5.916811] ? ip_rt_bug+0x8/0x8 [ 5.916813] ? mld_ifc_timer_expire+0x2db/0x400 [ 5.916814] ? neigh_proxy_process+0x8/0x8 [ 5.916816] ? call_timer_fn+0x3d/0xd0 [ 5.916817] ? __run_timers+0x2a9/0x300 [ 5.916819] ? rcu_core_si+0x8/0x8 [ 5.916820] ? run_timer_softirq+0x14/0x30 [ 5.916821] ? __do_softirq+0x154/0x262 [ 5.916822] ? native_x2apic_icr_write+0x8/0x8 [ 5.916824] ? irq_exit+0xba/0xc0 [ 5.916825] ? hv_stimer0_vector_handler+0x99/0xe0 [ 5.916826] ? hv_stimer0_callback_vector+0xf/0x20 [ 5.916826] [ 5.916828] ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8 [ 5.916829] ? raw_setsockopt+0x8/0x8 [ 5.916830] ? default_idle+0xe/0x10 [ 5.916832] ? do_idle.llvm.10446269078108580492+0xb7/0x130 [ 5.916833] ? raw_setsockopt+0x8/0x8 [ 5.916833] ? cpu_startup_entry+0x15/0x20 [ 5.916835] ? cpu_hotplug_enable.cfi_jt+0x8/0x8 [ 5.916836] ? start_secondary+0x188/0x190 [ 5.916837] ? secondary_startup_64+0xa5/0xb0 [ 5.916838] ---[ end trace f2683fa869597ba5 ]--- Avoid this by using the right return type for netvsc_start_xmit. Fixes: fceaf24a943d8 ("Staging: hv: add the Hyper-V virtual network driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1009 Signed-off-by: Nathan Chancellor Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller