user/sven/linux.git/drivers/net/ipa, branch v5.9.8

net: ipa: command payloads already mapped

2020-11-01T11:47:06Z

[ Upstream commit df833050cced27e1b343cc8bc41f90191b289334 ] IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd Tested-by: Stephen Boyd Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ipa: skip suspend/resume activities if not set up

2020-10-29T09:10:51Z

[ Upstream commit d1704382821032fede445b816f4296fd379baacf ] When processing a system suspend request we suspend modem endpoints if they are enabled, and call ipa_cmd_tag_process() (which issues IPA commands) to ensure the IPA pipeline is cleared. It is an error to attempt to issue an IPA command before setup is complete, so this is clearly a bug. But we also shouldn't suspend or resume any endpoints that have not been set up. Have ipa_endpoint_suspend() and ipa_endpoint_resume() immediately return if setup hasn't completed, to avoid any attempt to configure endpoints or issue IPA commands in that case. Fixes: 84f9bd12d46d ("soc: qcom: ipa: IPA endpoints") Tested-by: Matthias Kaehlcke Signed-off-by: Alex Elder Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ipa: fix u32_replace_bits by u32p_xxx version

2020-09-12T00:28:48Z

Looks like u32p_replace_bits() should be used instead of u32_replace_bits() which does not modifies the value but returns the modified version. Fixes: 2b9feef2b6c2 ("soc: qcom: ipa: filter and routing tables") Signed-off-by: Vadym Kochan Reviewed-by: Alex Elder Signed-off-by: David S. Miller

Merge tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

2020-08-11T18:17:45Z

Pull remoteproc updates from Bjorn Andersson: "This introduces a new "detached" state for remote processors that are deemed to be running at the time Linux boots and the infrastructure for "attaching" to these. It then introduces the support for performing this operation for the STM32 platform. The coredump functionality is moved out from the core file and gains support for an optional mode where the recovery phase awaits the notification from devcoredump that the dump should be released. This allows userspace to grab the coredump in scenarios where vmalloc space is too low for creating a complete copy of the coredump before handing this to devcoredump. A new character device based interface is introduced to allow tying the stoppage of a remote processor to the termination of a user space process. This is useful in situations when such process provides crucial resources/operations for the firmware running on the remote processor. The Texas Instrument K3 driver gains support for the C66x and C71x DSPs. Qualcomm remoteprocs gains support for stashing relocation information in IMEM, to aid post mortem debugging and the crash notification mechanism is generalized to be reusable in cases where loosely coupled drivers needs to know about the status of a remote processor. One such example is the IPA hardware block, which is jointly owned with the modem and migrated to this improved interface. It also introduces a number of bug fixes and debug improvements for the Qualcomm modem remoteproc driver. And it cleans up the inconsistent interface for remoteproc drivers to implement power management" * tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits) remoteproc: core: Register the character device interface remoteproc: Add remoteproc character device interface remoteproc: kill IPA notify code net: ipa: new notification infrastructure remoteproc: k3-dsp: Add support for C71x DSPs dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs remoteproc: k3: Add TI-SCI processor control helper functions remoteproc: Introduce rproc_of_parse_firmware() helper dt-bindings: arm: keystone: Add common TI SCI bindings remoteproc: qcom_q6v5_mss: Remove redundant running state remoteproc: qcom: q6v5: Update running state before requesting stop remoteproc: qcom_q6v5_mss: Add modem debug policy support remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load rpmsg: update documentation remoteproc: qcom_q6v5_mss: Add MBA log extraction support remoteproc: Add coredump debugfs entry ...

net: ipa: new notification infrastructure

2020-07-29T00:10:47Z

Use the new SSR notifier infrastructure to request notifications of modem events, rather than the remoteproc IPA notification system. The latter was put in place temporarily with the knowledge that the new mechanism would become available. Acked-by: David S. Miller Reviewed-by: Bjorn Andersson Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20200724181142.13581-2-elder@linaro.org Signed-off-by: Bjorn Andersson

net: ipa: fix kerneldoc comments

2020-07-14T00:11:53Z

This commit affects comments (and in one case, whitespace) only. Throughout the IPA code, return statements are documented using "@Return:", whereas they should use "Return:" instead. Fix these mistakes. In function definitions, some parameters are missing their comment to describe them. And in structure definitions, some fields are missing their comment to describe them. Add these missing descriptions. Some arguments changed name and type along the way, but their descriptions were not updated (an endpoint pointer is now used in many places that previously used an endpoint ID). Fix these incorrect parameter descriptions. In the description for the ipa_clock structure, one field had a semicolon instead of a colon in its description. Fix this. Add a missing function description for ipa_gsi_endpoint_data_empty(). All of these issues were identified when building with "W=1". Signed-off-by: Alex Elder Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-07-11T07:46:00Z

All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller

net: ipa: include declarations in "ipa_gsi.c"

2020-07-07T19:43:18Z

Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are defined before they are used in "ipa_gsi.c". This addresses some warnings that are reported with a "W=1" build. Fixes: c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: declare struct types in "ipa_gsi.h"

2020-07-07T19:43:18Z

Pointers to two struct types are used in "ipa_gsi.h", without those struct types being forward-declared. Add these declarations. Fixes: c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by: Alex Elder Signed-off-by: David S. Miller

net: ipa: fix QMI structure definition bugs

2020-07-07T19:43:18Z

Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder Signed-off-by: David S. Miller