user/sven/linux.git/drivers/net/phy/phy.c, branch v3.18.48

net: phy: Allow EEE for all RGMII variants

2015-06-15T18:26:49Z

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Fix verification of EEE support in phy_init_eee

2015-03-14T19:37:11Z

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ] phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: Correctly handle MII ioctl which changes autonegotiation.

2014-11-11T21:21:26Z

When advertised capabilities are changed with mii-tool, such as: mii-tool -A 10baseT the existing handler has two errors. - An actual PHY register value is provided by mii-tool, and this must be mapped to internal state with mii_adv_to_ethtool_adv_t(). - The PHY state machine needs to be told that autonegotiation has again been performed. If not, the MAC will not be notified of the new link speed and duplex, resulting in a possible config mismatch. Signed-off-by: Brian Hill Acked-by: Florian Fainelli Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-09-08T04:41:53Z

phy: fix EEE checks inside the phy_init_eee.

2014-08-27T23:29:39Z

According to the Std 802.3az if the EEE Adv (Reg 7.60), Link partner ability (Reg 7.61) and EEE capability (Register 3.20) bits return 0 this means no EEE is supported. So this patch fixes the checks inside the phy_init_eee function. Signed-off-by: Nandini Sharma Signed-off-by: Giuseppe Cavallaro Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: allow phy_init_eee() to work with internal PHYs

2014-08-23T18:39:09Z

Internal PHYs do not have any specific phy_interface_t defined because they are within an Ethernet MAC or a larger IC, they will fail the early check in phy_init_eee(). Allow these PHYs to proceed with EEE initialization and report error/success by checking the standard C45 EEE-related registers. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: export phy_{read,write}_mmd_indirect

2014-08-23T18:39:09Z

Some PHY drivers might need to access Clause 45 registers in Clause 22 compatibility mode to e.g: properly advertise EEE support when disabled by default. Export these two helper functions: phy_read_mmd_indirect() and phy_write_mmd_indirect() for drivers to use them. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: libphy: Add phy specific function to access mmd phy registers

2014-07-31T03:00:21Z

libphy was originally written assuming all phy devices support clause 45 access extensions to the mmd registers through the indirection registers located within the first 16 phy registers. This assumption is not true in all cases, and one specific example is the Micrel ksz9021 10/100/1000 Mbps phy. Using the stmmac driver, accessing the mmd registers to query and configure energy efficient Ethernet (EEE) features yielded unexpected behavior. This patch adds mmd access functions to the phy driver that can be overriden by the phy specific driver if the phy does not support this mechanism or uses it's own non-standard access mechanism. By default, the IEEE Compatible clause 45 access mechanism described in clause 22 is used. With this patch, EEE query/configure functions as expected using the stmmac and the Micrel ksz9021 phy. Signed-off-by: Vince Bridgers Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

phy: Expand phy speed/duplex settings array

2014-07-15T23:30:04Z

Expand the phy speed/duplex settings array to support more than just baseT features. This change adds entries to support the following additional speed/duplex/media types: SUPPORTED_10000baseKR_Full SUPPORTED_10000baseKX4_Full SUPPORTED_2500baseX_Full SUPPORTED_1000baseKX_Full Additionally, it changes the 10GbE baseT entry from using the hardcoded value 10000 to the SPEED_10000 define. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: phylib: add link_change_notify callback to phy device

2014-06-21T22:50:00Z

Add a notify callback to inform phy drivers when the core is about to do its link adjustment. No change for drivers that do not implement this callback. Signed-off-by: Daniel Mack Signed-off-by: David S. Miller