user/sven/linux.git/drivers/net/phy, branch v6.6.17

net: phy: mediatek-ge-soc: sync driver with MediaTek SDK

2024-02-05T20:14:35Z

[ Upstream commit ff63cc2e95065bea978d2db01f7e7356cca3d021 ] Sync initialization and calibration routines with MediaTek's reference driver. Improves compliance and resolves link stability issues with CH340 IoT devices connected to MT798x built-in PHYs. Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Signed-off-by: Daniel Golle Link: https://lore.kernel.org/r/f2195279c234c0f618946424b8236026126bc595.1706071311.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: at803x: fix passing the wrong reference for config_intr

2024-02-05T20:14:22Z

[ Upstream commit f8fdbf3389f44c7026f16e36cb1f2ff017f7f5b2 ] Fix passing the wrong reference for config_initr on passing the function pointer, drop the wrong & from at803x_config_intr in the PHY struct. Signed-off-by: Christian Marangi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: micrel: fix ts_info value in case of no phc

2024-02-05T20:14:19Z

[ Upstream commit 915d25a9d69be969c1cc6c1dd0c3861f6da7b55e ] In case of no phc we should not return SOFTWARE TIMESTAMPING flags as we do not know whether the netdev supports of timestamping. Remove it from the lan8841_ts_info and simply return 0. Signed-off-by: Kory Maincent Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: micrel: Fix PTP frame parsing for lan8814

2024-02-01T00:19:01Z

[ Upstream commit aaf632f7ab6dec57bc9329a438f94504fe8034b9 ] The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. This is exactly the same issue as on lan8841. Fix this issue by removing this check so the userspace can decide on this. Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur Reviewed-by: Maxime Chevallier Reviewed-by: Divya Koppera Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: micrel: populate .soft_reset for KSZ9131

2024-01-25T23:35:56Z

[ Upstream commit e398822c4751017fe401f57409488f5948d12fb5 ] The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Claudiu Beznea Reviewed-by: Maxime Chevallier Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: micrel: Fix PTP frame parsing for lan8841

2024-01-25T23:35:56Z

[ Upstream commit acd66c2126eb9b5da2d89ae07dbcd73b909c2111 ] The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. Fix this issue by removing this check so the userspace can decide on this. Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841") Signed-off-by: Horatiu Vultur Reviewed-by: Divya Koppera Reviewed-by: Rahul Rameshbabu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: phy: skip LED triggers on PHYs on SFP modules

2024-01-01T12:42:32Z

[ Upstream commit b1dfc0f76231bbf395c59d20a2070684620d5d0f ] Calling led_trigger_register() when attaching a PHY located on an SFP module potentially (and practically) leads into a deadlock. Fix this by not calling led_trigger_register() for PHYs localted on SFP modules as such modules actually never got any LEDs. ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4-next-20231208+ #0 Tainted: G O ------------------------------------------------------ kworker/u8:2/43 is trying to acquire lock: ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8 but task is already holding lock: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sfp->sm_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 cleanup_module+0x2ae0/0x3120 [sfp] sfp_register_bus+0x5c/0x9c sfp_register_socket+0x48/0xd4 cleanup_module+0x271c/0x3120 [sfp] platform_probe+0x64/0xb8 really_probe+0x17c/0x3c0 __driver_probe_device+0x78/0x164 driver_probe_device+0x3c/0xd4 __driver_attach+0xec/0x1f0 bus_for_each_dev+0x60/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x108/0x208 driver_register+0x5c/0x118 __platform_driver_register+0x24/0x2c init_module+0x28/0xa7c [sfp] do_one_initcall+0x70/0x2ec do_init_module+0x54/0x1e4 load_module+0x1b78/0x1c8c __do_sys_init_module+0x1bc/0x2cc __arm64_sys_init_module+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #2 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 rtnl_lock+0x18/0x20 set_device_name+0x30/0x130 netdev_trig_activate+0x13c/0x1ac led_trigger_set+0x118/0x234 led_trigger_write+0x104/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #1 (&led_cdev->trigger_lock){++++}-{3:3}: down_write+0x4c/0x13c led_trigger_write+0xf8/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #0 (triggers_list_lock){++++}-{3:3}: __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sfp->sm_mutex); lock(rtnl_mutex); lock(&sfp->sm_mutex); lock(triggers_list_lock); *** DEADLOCK *** 4 locks held by kworker/u8:2/43: #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] stack backtrace: CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: events_power_efficient cleanup_module [sfp] Call trace: dump_backtrace+0xa8/0x10c show_stack+0x14/0x1c dump_stack_lvl+0x5c/0xa0 dump_stack+0x14/0x1c print_circular_bug+0x328/0x430 check_noncircular+0x124/0x134 __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 Signed-off-by: Daniel Golle Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phylink: initialize carrier state at creation

2023-11-28T17:20:11Z

commit 02d5fdbf4f2b8c406f7a4c98fa52aa181a11d733 upstream. Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus; SFP module is present, but no fiber connected, so definitely no carrier. After booting, eth2 is down, but netdev LED trigger surprisingly reports link active. Then, after "ip link set eth2 up", the link indicator goes away - as I would have expected it from the beginning. It turns out, that the default carrier state after netdev creation is "carrier ok". Some ethernet drivers explicitly call netif_carrier_off during probing, others (like mvneta) don't - which explains the current behaviour: only when the device is brought up, phylink_start calls netif_carrier_off. Fix this for all drivers using phylink, by calling netif_carrier_off in phylink_create. Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Cc: stable@vger.kernel.org Suggested-by: Andrew Lunn Signed-off-by: Klaus Kudielka Reviewed-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: sfp: add quirk for FS's 2.5G copper SFP

2023-11-28T17:19:38Z

[ Upstream commit e27aca3760c08b7b05aea71068bd609aa93e7b35 ] Add a quirk for a copper SFP that identifies itself as "FS" "SFP-2.5G-T". This module's PHY is inaccessible, and can only run at 2500base-X with the host without negotiation. Add a quirk to enable the 2500base-X interface mode with 2500base-T support and disable auto negotiation. Signed-off-by: Raju Lakkaraju Link: https://lore.kernel.org/r/20230925080059.266240-1-Raju.Lakkaraju@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI

2023-11-28T17:19:37Z

[ Upstream commit d387e34fec407f881fdf165b5d7ec128ebff362f ] Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd NRZ in their EEPROM. The module also require the ignore tx fault fixup similar to Huawei MA5671A as it gets disabled on error messages with serial redirection enabled. Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin