user/sven/linux.git/drivers/net/team, branch v3.18.48

team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid

2016-02-15T20:42:45Z

[ Upstream commit 60a6531bfe49555581ccd65f66a350cc5693fcde ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

team: don't traverse port list using rcu in team_set_mac_address

2015-03-14T19:37:14Z

[ Upstream commit 9215f437b85da339a7dfe3db6e288637406f88b2 ] Currently the list is traversed using rcu variant. That is not correct since dev_set_mac_address can be called which eventually calls rtmsg_ifinfo_build_skb and there, skb allocation can sleep. So fix this by remove the rcu usage here. Fixes: 3d249d4ca7 "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

team: fix possible null pointer dereference in team_handle_frame

2015-03-14T19:37:13Z

[ Upstream commit 57e595631904c827cfa1a0f7bbd7cc9a49da5745 ] Currently following race is possible in team: CPU0 CPU1 team_port_del team_upper_dev_unlink priv_flags &= ~IFF_TEAM_PORT team_handle_frame team_port_get_rcu team_port_exists priv_flags & IFF_TEAM_PORT == 0 return NULL (instead of port got from rx_handler_data) netdev_rx_handler_unregister The thing is that the flag is removed before rx_handler is unregistered. If team_handle_frame is called in between, team_port_exists returns 0 and team_port_get_rcu will return NULL. So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister that team_handle_frame will always see valid rx_handler_data pointer. Signed-off-by: Jiri Pirko Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin

2015-01-27T16:29:34Z

[ Upstream commit b0d11b42785b70e19bc6a3122eead3f7969a7589 ] This patch is fixing a race condition that may cause setting count_pending to -1, which results in unwanted big bulk of arp messages (in case of "notify peers"). Consider following scenario: count_pending == 2 CPU0 CPU1 team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers atomic_add (adding 1 to count_pending) team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to 0) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to -1) Fix this race by using atomic_dec_if_positive - that will prevent count_pending running under 0. Fixes: fc423ff00df3a1955441 ("team: add peer notification") Fixes: 492b200efdd20b8fcfd ("team: add support for sending multicast rejoins") Signed-off-by: Jiri Pirko Signed-off-by: Jiri Benc Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-10-08T20:22:22Z

net: better IFF_XMIT_DST_RELEASE support

2014-10-07T17:22:11Z

Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet Cc: Julian Anastasov Signed-off-by: David S. Miller

team: avoid race condition in scheduling delayed work

2014-10-05T00:50:50Z

When team_notify_peers and team_mcast_rejoin are called, they both reset their respective .count_pending atomic variable. Then when the actual worker function is executed, the variable is atomically decremented. This pattern introduces a potential race condition where the .count_pending rolls over and the worker function keeps rescheduling until .count_pending decrements to zero again: THREAD 1 THREAD 2 ======== ======== team_notify_peers(teamX) atomic_set count_pending = 1 schedule_delayed_work team_notify_peers(teamX) atomic_set count_pending = 1 team_notify_peers_work atomic_dec_and_test count_pending = 0 (return) schedule_delayed_work team_notify_peers_work atomic_dec_and_test count_pending = -1 schedule_delayed_work (repeat until count_pending = 0) Instead of assigning a new value to .count_pending, use atomic_add to tack-on the additional desired worker function invocations. Signed-off-by: Joe Lawrence Acked-by: Jiri Pirko Fixes: fc423ff00df3a19554414ee ("team: add peer notification") Fixes: 492b200efdd20b8fcfdac87 ("team: add support for sending multicast rejoins") Signed-off-by: David S. Miller

team: set IFF_TEAM_PORT priv_flag after rx_handler is registered

2014-08-26T00:35:44Z

When one tries to add eth as a port into team and that eth is already in use by other rx_handler device (macvlan, bond, bridge, ...) a bug in team_port_add() causes that IFF_TEAM_PORT flag is set before rx_handler is registered. In between, netdev nofifier is called and team_device_event() sees IFF_TEAM_PORT and thinks that rx_handler_data pointer is set to team_port. But it isn't. Fix this by reordering rx_handler register and IFF_TEAM_PORT priv flag set so it is very similar to how bonding does this. Reported-by: Erik Hugne Fixes: 3d249d4ca7 "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

team: Simplify return path of team_newlink

2014-08-05T23:37:51Z

The variable "err" is not necessary. Return register_netdevice() directly. Signed-off-by: Toshiaki Makita Acked-by: Jiri Pirko Signed-off-by: David S. Miller

net: filter: split 'struct sk_filter' into socket and bpf parts

2014-08-02T22:03:58Z

clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller