user/sven/linux.git/drivers/net/usb/Makefile, branch v4.2.6

r8152: disable the ECM mode

2014-03-06T01:40:24Z

There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support

2014-02-11T00:53:06Z

Signed-off-by: Liu Junliang Signed-off-by: David S. Miller

net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver

2013-11-05T20:21:25Z

This driver supports devices using the NCM protocol as an encapsulation layer for other protocols, like the E3131 Huawei 3G modem. This drivers approach was heavily inspired by the qmi_wwan/cdc_mbim approach & code model. Signed-off-by: Enrico Mioso Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support

2013-09-04T02:26:03Z

Signed-off-by: Liu Junliang Signed-off-by: David S. Miller

net/usb: add relative mii functions for r815x

2013-07-12T00:11:01Z

Base on cdc_ether, add the mii functions for RTL8152 and RTL8153. The RTL8152 and RTL8153 support ECM mode which use the driver of cdc_ether. Add the mii functions. Then, the basic PHY access is possible. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

net/usb: new driver for RTL8152

2013-05-06T20:16:52Z

Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters Signed-off-by: Hayes Wang Cc: Realtek linux nic maintainers Signed-off-by: David S. Miller

ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver

2013-03-03T06:43:47Z

This is a resubmission. Added kfree() in ax88179_get_eeprom to prevent memory leakage. Modified "__le16 rxctl" to "u16 rxctl" in "struct ax88179_data" and removed pointless casts. Removed asix_init and asix_exit functions and added "module_usb_driver(ax88179_178a_driver)". Fixed endianness issue on big endian systems and verified this driver on iBook G4. Removed steps that change net->features in ax88179_set_features function. Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array. Fixed the issue that the default MTU is not 1500. Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an MTU higher than 1500. Fixed indentation and empty line coding style errors. The _nopm version usb functions were added to access register in suspend and resume functions. Serveral variables allocted dynamically were removed and replaced by stack variables. ax88179_get_eeprom were modified from asix_get_eeprom in asix_common. This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0 to gigabit ethernet adapters. It's based on the AX88xxx driver but the usb commands used to access registers for AX88179 are completely different. This driver had been verified on x86 system with AX88179/AX88178A and Sitcomm LN-032 USB dongles. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller

net: cdc_mbim: build the MBIM driver

2012-10-23T06:40:11Z

Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

asix: Add a new driver for the AX88172A

2012-07-17T06:26:23Z

The Asix AX88172A is a USB 2.0 Ethernet interface that supports both an internal PHY as well as an external PHY (connected via MII). This patch adds a driver for the AX88172A and provides support for both modes and the phylib. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller

asix: Factor out common code

2012-07-17T06:26:23Z

Allow the new driver for the AX88172A to share code with the existing drivers for ASIX devices. Signed-off-by: Christian Riesch Signed-off-by: David S. Miller