user/sven/linux.git/drivers/net/usb/cdc_ether.c, branch v4.2.5

drivers/net/usb: add device id for NVIDIA Tegra USB 3.0 Ethernet

2015-07-09T06:58:20Z

This device is sold as 'NVIDIA Tegra USB 3.0 Ethernet'. Chipset is RTL8153 and works with r8152. Signed-off-by: Zheng Liu Signed-off-by: David S. Miller

net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet

2015-03-31T21:15:37Z

This device is sold as 'Lenovo Tinkpad USB 3.0 Ethernet 4X90E51405'. Chipset is RTL8153 and works with r8152. Signed-off-by: Christian Hesse Signed-off-by: David S. Miller

cdc-ether: implement MULTICAST flag on the device

2014-11-07T20:17:45Z

Olivier having laid the groundwork this patch transmits the multicast flag to the device to save some bus traffic. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

cdc-ether: handle promiscuous mode with a set_rx_mode callback

2014-10-28T21:26:20Z

Promiscuous mode was not supported anymore with my Lenovo adapters (RTL8153) since commit c472ab68ad67db23c9907a27649b7dc0899b61f9 (cdc-ether: clean packet filter upon probe). It was not possible to use them in a bridge anymore. Signed-off-by: Olivier Blin Also-analyzed-by: Loïc Yhuel Signed-off-by: David S. Miller

cdc-ether: extract usbnet_cdc_update_filter function

2014-10-28T21:26:19Z

This will be used by the set_rx_mode callback. Also move a comment about multicast filtering in this new function. Signed-off-by: Olivier Blin Signed-off-by: David S. Miller

cdc-ether: clean packet filter upon probe

2014-07-29T19:22:15Z

There are devices that don't do reset all the way. So the packet filter should be set to a sane initial value. Failure to do so leads to intermittent failures of DHCP on some systems under some conditions. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller

qmi_wwan/cdc_ether: move Novatel E371 (1410:9011) to qmi_wwan

2014-03-31T20:06:11Z

This device provides QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the device in cdc_ether and add its IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Yegor Yefremov Signed-off-by: David S. Miller

r8152: disable the ECM mode

2014-03-06T01:40:24Z

There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

drivers/net: delete non-required instances of include

2014-01-16T19:53:26Z

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

r8152: ecm and vendor modes coexist

2014-01-15T02:48:54Z

Remove the limitation that the ecm and r8152 drivers couldn't coexist. - Remove the devices from the blacklist of relative drivers. - Remove usb_driver_set_configuration() from r8152 driver. - Modify the id_table of the r8152 driver for the vendor mode only. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller