user/sven/linux.git/drivers/net/usb, branch stable/3.8.y

net: cdc_mbim: remove bogus sizeof()

2013-05-01T16:46:19Z

[ Upstream commit 32b161aa88aa40a83888a995c6e2ef81140219b1 ] The intention was to test against the constant, not the size of the constant. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

smsc75xx: fix jumbo frame support

2013-04-05T16:26:22Z

[ Upstream commit 4c51e53689569398d656e631c17308d9b8e84650 ] This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility

2013-03-28T19:17:16Z

[ Upstream commit 1e8bbe6cd02fc300c88bd48244ce61ad9c7d1776 ] commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") introduced a new policy, preferring MBIM for dual NCM/MBIM functions if the cdc_mbim driver was enabled. This caused a regression for users wanting to use NCM. Devices implementing NCM backwards compatibility according to section 3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single USB function, using different altsettings. The cdc_ncm and cdc_mbim drivers will both probe such functions, and must agree on a common policy for selecting either MBIM or NCM. Until now, this policy has been set at build time based on CONFIG_USB_NET_CDC_MBIM. Use a module parameter to set the system policy at runtime, allowing the user to prefer NCM on systems with the cdc_mbim driver. Cc: Greg Suarez Cc: Alexey Orishko Reported-by: Geir Haatveit Reported-by: Tommi Kyntola Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: qmi_wwan: set correct altsetting for Gobi 1K devices

2013-03-28T19:17:08Z

[ Upstream commit b701f16dd490d3f346724050f17d60beda094998 ] commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams Signed-off-by: Bjørn Mork Tested-by: Dan Williams Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

usbnet: smsc95xx: fix suspend failure

2013-03-14T18:26:35Z

commit 7643721471117d5f62ca36f328d3dc8d84af4402 upstream. The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Signed-off-by: Ming Lei Cc: Steve Glendinning Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: fix probing of devices with multiple control interface altsettings

2013-02-28T13:38:40Z

[ Upstream commit f350ca03703133c94fe742f6fa6ff0fd8f5a9a09 ] commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices") added a test for a CDC MBIM altsetting, implementing the cdc_ncm part of MBIM backward compatibility support. This intentionally made the driver behave differently for CDC NCM devices with 2 alternate settings for the Communication interface, depending on whether or not CONFIG_USB_NET_CDC_MBIM was enabled. This is correct iff alternate setting #1 really *is* a MBIM setting. If not, then NCM probing will use a different altsetting than before, possibly causing probing failures depending on CONFIG_USB_NET_CDC_MBIM. Fix by setting the altsetting back to default after the test, restoring the previous behaviour for non MBIM devices. This bug causes probing of Huawei E3276 devices to fail when the MBIM driver is enabled, because these devices have a second alternate setting with no CDC functional descriptors. Reported-and-tested-by: Jonathan A. Cc: Greg Suarez Cc: Alexey Orishko Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: qmi_wwan: add Yota / Megafon M100-1 4g modem

2013-02-12T21:06:13Z

Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: qmi_wwan: add more Huawei devices, including E320

2013-02-06T21:09:40Z

Adding new class/subclass/protocol combinations based on the GPLed out-of-tree Huawei driver. One of these has already appeared on a device labelled as "E320". Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: cdc_ncm: add another Huawei vendor specific device

2013-02-06T21:09:40Z

Adding a new vendor specific class/subclass/protocol combination for CDC NCM devices based on information from a GPLed out-of-tree driver from Huawei. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

net: usbnet: fix tx_dropped statistics

2013-02-04T18:07:31Z

It is normal for minidrivers accumulating frames to return NULL from their tx_fixup function. We do not want to count this as a drop, or log any debug messages. A different exit path is therefore chosen for such drivers, skipping the debug message and the tx_dropped increment. The test for accumulating drivers was however completely bogus, making the exit path selection depend on whether the user had enabled tx_err logging or not. This would arbitrarily mess up accounting for both accumulating and non-accumulating minidrivers, and would result in unwanted debug messages for the accumulating drivers. Fix by testing for FLAG_MULTI_PACKET instead, which probably was the intention from the beginning. This usage match the documented behaviour of this flag: Indicates to usbnet, that USB driver accumulates multiple IP packets. Affects statistic (counters) and short packet handling. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller