user/sven/linux.git/drivers/net/usb, branch v4.14.266

ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

2022-02-08T17:16:27Z

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov Tested-by: Jan Kiszka Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mcs7830: handle usb read errors properly

2022-01-27T08:00:51Z

[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ] Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

rndis_host: support Hytera digital radios

2022-01-11T12:57:37Z

commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream. Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: usb: pegasus: Do not drop long Ethernet frames

2022-01-05T11:33:48Z

[ Upstream commit ca506fca461b260ab32952b610c3d4aadc6c11fd ] The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames that are longer than 1518 octets, for example, Ethernet frames that contain 802.1Q VLAN tags. The frames are sent to the pegasus driver via USB but the driver discards them because they have the Long_pkt field set to 1 in the received status report. The function read_bulk_callback of the pegasus driver treats such received "packets" (in the terminology of the hardware) as errors but the field simply does just indicate that the Ethernet frame (MAC destination to FCS) is longer than 1518 octets. It seems that in the 1990s there was a distinction between "giant" (> 1518) and "runt" (< 64) frames and the hardware includes flags to indicate this distinction. It seems that the purpose of the distinction "giant" frames was to not allow infinitely long frames due to transmission errors and to allow hardware to have an upper limit of the frame size. However, the hardware already has such limit with its 2048 octet receive buffer and, therefore, Long_pkt is merely a convention and should not be treated as a receive error. Actually, the hardware is even able to receive Ethernet frames with 2048 octets which exceeds the claimed limit frame size limit of the driver of 1536 octets (PEGASUS_MTU). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matthias-Christian Ott Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: usb: lan78xx: add Allied Telesis AT29M2-AF

2021-12-29T11:17:32Z

commit ef8a0f6eab1ca5d1a75c242c5c7b9d386735fa0a upstream. This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: lan78xx: Avoid unnecessary self assignment

2021-12-22T08:18:01Z

commit 94e7c844990f0db92418586b107be135b4963b66 upstream. Clang warns when a variable is assigned to itself. drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign] offset = offset; ~~~~~~ ^ ~~~~~~ 1 warning generated. Reorder the if statement to acheive the same result and avoid a self assignment warning. Link: https://github.com/ClangBuiltLinux/linux/issues/129 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Anders Roxell Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero

2021-12-14T09:16:55Z

commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream. Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 Call Trace: skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones Reviewed-by: Bjørn Mork Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available

2021-12-08T07:46:55Z

commit 817b653160db9852d5a0498a31f047e18ce27e5b upstream. On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn Signed-off-by: Sven Schuchmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: lan78xx: fix division by zero in send path

2021-11-02T17:25:12Z

commit db6c3c064f5d55fa9969f33eafca3cdbefbb3541 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com Signed-off-by: Johan Hovold Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

usbnet: fix error return code in usbnet_probe()

2021-11-02T17:25:11Z

commit 6f7c88691191e6c52ef2543d6f1da8d360b27a24 upstream. Return error code if usb_maxpacket() returns 0 in usbnet_probe() Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket") Reported-by: Hulk Robot Signed-off-by: Wang Hai Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman