user/sven/linux.git/drivers/net/usb, branch v6.8.4

r8152: fix unknown device for choose_configuration

2024-03-26T22:16:57Z

[ Upstream commit 46590b545df636aea0f9f7f2100d9963c0af5824 ] For the unknown device, rtl8152_cfgselector_choose_configuration() should return a negative value. Then, usb_choose_configuration() would set a configuration for CDC ECM or NCM mode. Otherwise, there is no usb interface driver for the device. Fixes: aa4f2b3e418e ("r8152: Choose our USB config with choose_configuration() rather than probe()") Signed-off-by: Hayes Wang Link: https://lore.kernel.org/r/20240308075206.33553-436-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

sr9800: Add check for usbnet_get_endpoints

2024-03-26T22:16:54Z

[ Upstream commit 07161b2416f740a2cb87faa5566873f401440a61 ] Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. Signed-off-by: Chen Ni Reviewed-by: Simon Horman Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: lan78xx: fix runtime PM count underflow on link stop

2024-03-01T08:38:59Z

Current driver has some asymmetry in the runtime PM calls. On lan78xx_open() it will call usb_autopm_get() and unconditionally usb_autopm_put(). And on lan78xx_stop() it will call only usb_autopm_put(). So far, it was working only because this driver do not activate autosuspend by default, so it was visible only by warning "Runtime PM usage count underflow!". Since, with current driver, we can't use runtime PM with active link, execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise, keep ref counting high as long as interface is open. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Oleksij Rempel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

net: lan78xx: fix "softirq work is pending" error

2024-02-28T02:21:51Z

Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: usb: dm9601: fix wrong return value in dm9601_mdio_read

2024-02-28T02:17:23Z

The MII code does not check the return value of mdio_read (among others), and therefore no error code should be sent. A previous fix to the use of an uninitialized variable propagates negative error codes, that might lead to wrong operations by the MII library. An example of such issues is the use of mii_nway_restart by the dm9601 driver. The mii_nway_restart function does not check the value returned by mdio_read, which in this case might be a negative number which could contain the exact bit the function checks (BMCR_ANENABLE = 0x1000). Return zero in case of error, as it is common practice in users of mdio_read to avoid wrong uses of the return value. Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by: Javier Carrasco Reviewed-by: Simon Horman Reviewed-by: Peter Korsgaard Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com Signed-off-by: Jakub Kicinski

lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected

2024-02-27T02:38:01Z

Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski

net: smsc95xx: add support for SYS TEC USB-SPEmodule1

2024-02-23T03:14:06Z

This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pair. Signed-off-by: Andre Werner Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com Signed-off-by: Jakub Kicinski

Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-01-18T19:43:55Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.8-rc1. Included in here are the following: - Thunderbolt subsystem and driver updates for USB 4 hardware and issues reported by real devices - xhci driver updates - dwc3 driver updates - uvc_video gadget driver updates - typec driver updates - gadget string functions cleaned up - other small changes All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: typec: tipd: fix use of device-specific init function usb: typec: tipd: Separate reset for TPS6598x usb: mon: Fix atomicity violation in mon_bin_vma_fault usb: gadget: uvc: Remove nested locking usb: gadget: uvc: Fix use are free during STREAMOFF usb: typec: class: fix typec_altmode_put_partner to put plugs dt-bindings: usb: dwc3: Limit num-hc-interrupters definition dt-bindings: usb: xhci: Add num-hc-interrupters definition xhci: add support to allocate several interrupters USB: core: Use device_driver directly in struct usb_driver and usb_device_driver arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue arm64: dts: qcom: msm8996: Remove PNoC clock from MSS arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8939: Drop RPM bus clocks arm64: dts: qcom: sdm630: Drop RPM bus clocks arm64: dts: qcom: qcs404: Drop RPM bus clocks arm64: dts: qcom: msm8996: Drop RPM bus clocks ...

Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-01-18T19:37:24Z

Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...

lan78xx: remove redundant statement in lan78xx_get_eee

2024-01-09T03:17:50Z

eee_active is set by phy_ethtool_get_eee() already, using the same logic plus an additional check against link speed/duplex values. See genphy_c45_eee_is_active() for details. So we can remove this line. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/b086b296-0a1b-42d4-8e2b-ef6682598185@gmail.com Signed-off-by: Jakub Kicinski