user/sven/linux.git/drivers/net/wan, branch v6.1.4

net: farsync: Fix kmemleak when rmmods farsync

2022-12-31T12:32:26Z

[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ] There are two memory leaks reported by kmemleak: unreferenced object 0xffff888114b20200 (size 128): comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s) hex dump (first 32 bytes): e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW..... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmalloc_trace+0x22/0x60 [] __hw_addr_add_ex+0x198/0x6c0 [] dev_addr_init+0x13d/0x230 [] alloc_netdev_mqs+0x10d/0xe50 [] alloc_hdlcdev+0x2e/0x80 [] fst_add_one+0x601/0x10e0 [farsync] ... unreferenced object 0xffff88810b85b000 (size 1024): comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s) hex dump (first 32 bytes): 00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p...... 00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................ backtrace: [] kmalloc_trace+0x22/0x60 [] fst_add_one+0x154/0x10e0 [farsync] [] local_pci_probe+0xd3/0x170 ... The root cause is traced to the netdev and fst_card_info are not freed when removes one fst in fst_remove_one(), which may trigger oom if repeated insmod and rmmod module. Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as the operations on the error handling path in fst_add_one(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Li Zetao Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: lapbether: fix issue of invalid opcode in lapbeth_open()

2022-11-08T11:47:36Z

If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues") Signed-off-by: Zhengchao Shao Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni

net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event()

2022-11-07T09:31:26Z

When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao Signed-off-by: David S. Miller

WAN: Fix syntax errors in comments

2022-06-07T08:45:25Z

Delete the redundant word 'the'. Signed-off-by: Xiang wangx Link: https://lore.kernel.org/r/20220604040917.8926-1-wangxiang@cdjrlc.com Signed-off-by: Paolo Abeni

net: wan: switch to netif_napi_add_weight()

2022-05-08T10:33:57Z

A handful of WAN drivers use custom napi weights, switch them to the new API. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: wan: remove support for Z85230-based devices

2022-04-27T11:22:56Z

Looks like all the changes to this driver had been automated churn since git era begun. The driver is using virt_to_bus(), it's just a maintenance burden unlikely to have any users. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: wan: remove support for COSA and SRP synchronous serial boards

2022-04-27T11:22:56Z

Looks like all the changes to this driver had been automated churn since git era begun. The driver is using virt_to_bus() so it should be updated to a proper DMA API or removed. Given the latest "news" entry on the website is from 1999 I'm opting for the latter. I'm marking the allocated char device major number as [REMOVED], I reckon we can't reuse it in case some SW out there assumes its COSA? Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: wan: remove the lanmedia (lmc) driver

2022-04-06T14:28:23Z

The driver for LAN Media WAN interfaces spews build warnings on microblaze. The virt_to_bus() calls discard the volatile keyword. The right thing to do would be to migrate this driver to a modern DMA API but it seems unlikely anyone is actually using it. There had been no fixes or functional changes here since the git era begun. Let's remove this driver, there isn't much changing in the APIs, if users come forward we can apologize and revert. Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ Signed-off-by: Jakub Kicinski Acked-by: Arnd Bergmann Acked-by: Thomas Bogendoerfer Signed-off-by: David S. Miller

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-03-24T20:13:26Z

Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...

Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2022-03-24T01:20:09Z

Pull ARM SoC updates from Arnd Bergmann: "SoC specific code is generally used for older platforms that don't (yet) use device tree to do the same things. - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller from NXP. At the moment this is still incomplete as other portions are merged through different trees. - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms gets removed, now the Arm NOMMU platforms are limited to the Cortex-M family of microcontrollers - Two old PXA boards get removed, along with corresponding driver bits. - Continued cleanup of the Intel IXP4xx platforms, removing some remnants of the old board files. - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung - CPU idle support for AT91 - A system controller driver for Polarfire" * tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: remove support for NOMMU ARMv4/v5 ARM: PXA: fix up decompressor code soc: microchip: make mpfs_sys_controller_put static ARM: pxa: remove Intel Imote2 and Stargate 2 boards ARM: mmp: Fix failure to remove sram device ARM: mstar: Select ARM_ERRATA_814220 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency ARM: ixp4xx: Convert to SPARSE_IRQ and P2V ARM: ixp4xx: Drop all common code ARM: ixp4xx: Drop custom DMA coherency and bouncing ARM: ixp4xx: Remove feature bit accessors net: ixp4xx_hss: Check features using syscon net: ixp4xx_eth: Drop platform data support soc: ixp4xx-npe: Access syscon regs using regmap soc: ixp4xx: Add features from regmap helper ...