user/sven/linux.git/drivers/net, branch stable/4.3.y

rtlwifi: rtl8821ae: Fix lockups on boot

2016-02-19T22:28:38Z

commit eeec5d0ef7ee54a75e09e861c3cc44177b8752c7 upstream. In commit 54328e64047a5 ("rtlwifi: rtl8821ae: Fix system lockups on boot"), an attempt was made to fix a regression introduced in commit 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers"). Unfortunately, there were logic errors in that patch that prevented affected boxes from booting even after that patch was applied. The actual cause of the original problem is unknown as none of the developers have systems that are affected. Fixes: 54328e64047a ("rtlwifi: rtl8821ae: Fix system lockups on boot") Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)

2016-02-19T22:28:26Z

commit e47301b06d5a65678690f04c2248fd181db1e59a upstream. Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [] (wl12xx_set_power_on [wlcore]) from [] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [] (wlcore_nvs_cb [wlcore]) from [] (request_firmware_work_func+0x30/0x58) [ 23.685784] [] (request_firmware_work_func) from [] (process_one_work+0x1b4/0x4b4) [ 23.695591] [] (process_one_work) from [] (worker_thread+0x3c/0x4a4) [ 23.704124] [] (worker_thread) from [] (kthread+0xd4/0xf0) [ 23.711747] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by: Uri Mashiach Acked-by: Igor Grinberg Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

wlcore/wl12xx: spi: fix oops on firmware load

2016-02-19T22:28:25Z

commit 9b2761cb72dc41e1948c8a5512b4efd384eda130 upstream. The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [] lr : [] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [] (__spi_validate) from [] (__spi_sync+0x78/0x210) [ 294.891670] [] (__spi_sync) from [] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [] (wl12xx_spi_raw_write [wlcore_spi]) from [] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [] (wlcore_boot_upload_firmware [wlcore]) from [] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [] (wl12xx_boot [wl12xx]) from [] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [] (wl1271_op_add_interface [wlcore]) from [] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [] (ieee80211_do_open [mac80211]) from [] (__dev_open+0xa8/0x110) [ 294.957307] [] (__dev_open) from [] (__dev_change_flags+0x88/0x148) [ 294.965713] [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [ 294.974576] [] (dev_change_flags) from [] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [] (devinet_ioctl) from [] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [] (sock_ioctl) from [] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by: Uri Mashiach Acked-by: Igor Grinberg Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid

2016-01-31T19:25:52Z

[ Upstream commit 60a6531bfe49555581ccd65f66a350cc5693fcde ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx5_core: Fix trimming down IRQ number

2016-01-31T19:25:52Z

[ Upstream commit 0b6e26ce89391327d955a756a7823272238eb867 ] With several ConnectX-4 cards installed on a server, one may receive irqn > 255 from the kernel API, which we mistakenly trim to 8bit. This causes EQ creation failure with the following stack trace: [] dump_stack+0x48/0x64 [] __setup_irq+0x3a1/0x4f0 [] request_threaded_irq+0x120/0x180 [] ? mlx5_eq_int+0x450/0x450 [mlx5_core] [] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core] [] alloc_comp_eqs+0xb1/0x180 [mlx5_core] [] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core] [] init_one+0x99/0x1c0 [mlx5_core] [] local_pci_probe+0x4c/0xa0 Fixing it by changing of the irqn type from u8 to unsigned int to support values > 255 Fixes: 61d0e73e0a5a ('net/mlx5_core: Use the the real irqn in eq->irqn') Reported-by: Jiri Pirko Signed-off-by: Doron Tsur Signed-off-by: Matan Barak Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ppp, slip: Validate VJ compression slot parameters completely

2016-01-31T19:25:51Z

[ Upstream commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae ] Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by: 郭永刚 References: http://article.gmane.org/gmane.comp.security.oss.general/17908 Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

dwc_eth_qos: Fix dma address for multi-fragment skbs

2016-01-31T19:25:51Z

[ Upstream commit d461873272169a3fc3a8d155d7b1c92e9d97b419 ] The offset inside the fragment was not used for the dma address and silent data corruption resulted because TSO makes the checksum match. Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by: Lars Persson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bonding: Prevent IPv6 link local address on enslaved devices

2016-01-31T19:25:51Z

[ Upstream commit 03d84a5f83a67e692af00a3d3901e7820e3e84d5 ] Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss Signed-off-by: Jay Vosburgh Reviewed-by: Jarod Wilson Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vxlan: fix test which detect duplicate vxlan iface

2016-01-31T19:25:50Z

[ Upstream commit 07b9b37c227cb8d88d478b4a9c5634fee514ede1 ] When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 vxlan11 DOWN 7a:cb:b9:38:59:0d Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

2016-01-31T19:25:49Z

[ Upstream commit 1dfddff5fcd869fcab0c52fafae099dfa435a935 ] NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman