user/sven/linux.git/drivers/net, branch v3.4.40

rt2x00: rt2x00pci_regbusy_read() - only print register access failure once

2013-04-12T16:38:47Z

commit 83589b30f1e1dc9898986293c9336b8ce1705dec upstream. BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Signed-off-by: Tim Gardner Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: "John W. Linville" Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

Revert "mwifiex: cancel cmd timer and free curr_cmd in shutdown process

2013-04-12T16:38:47Z

revert commit b9f1f48ce20a1b923429c216669d03b5a900a8cf which is commit 084c7189acb3f969c855536166042e27f5dd703f upstream. It shouldn't have been applied to the 3.4-stable tree. Reported-by: Ben Hutchings Cc: Marco Cesarano Reported-by: Bing Zhao Signed-off-by: Greg Kroah-Hartman

bonding: get netdev_rx_handler_unregister out of locks

2013-04-05T17:04:52Z

[ Upstream commit fcd99434fb5c137274d2e15dd2a6a7455f0f29ff ] Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by: Veaceslav Falico Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

smsc75xx: fix jumbo frame support

2013-04-05T17:04:51Z

[ Upstream commit 4c51e53689569398d656e631c17308d9b8e84650 ] This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

pch_gbe: fix ip_summed checksum reporting on rx

2013-04-05T17:04:51Z

[ Upstream commit 76a0e68129d7d24eb995a6871ab47081bbfa0acc ] skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ks8851: Fix interpretation of rxlen field.

2013-04-05T17:04:41Z

[ Upstream commit 14bc435ea54cb888409efb54fc6b76c13ef530e9 ] According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: Max Nekludov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

DM9000B: driver initialization upgrade

2013-04-05T17:04:40Z

[ Upstream commit 6741f40d198c6a5feb23653a1efd4ca47f93d83d ] Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

atl1e: drop pci-msi support because of packet corruption

2013-04-05T17:04:40Z

[ Upstream commit 188ab1b105c96656f6bcfb49d0d8bb1b1936b632 ] Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by: rebelyouth Cc: Huang, Xiong Tested-by: Christian Sünkenberg Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drivers: net: ethernet: cpsw: use netif_wake_queue() while restarting tx queue

2013-04-05T17:04:40Z

[ Upstream commit b56d6b3fca6d1214dbc9c5655f26e5d4ec04afc8 ] To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue

2013-04-05T17:04:40Z

To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman