user/sven/linux.git/drivers/net, branch v3.4.70

xen-netback: use jiffies_64 value to calculate credit timeout

2013-11-20T18:43:18Z

[ Upstream commit 059dfa6a93b779516321e5112db9d7621b1367ba ] time_after_eq() only works if the delta is < MAX_ULONG/2. For a 32bit Dom0, if netfront sends packets at a very low rate, the time between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2 and the test for timer_after_eq() will be incorrect. Credit will not be replenished and the guest may become unable to send packets (e.g., if prior to the long gap, all credit was exhausted). Use jiffies_64 variant to mitigate this problem for 32bit Dom0. Suggested-by: Jan Beulich Signed-off-by: Wei Liu Reviewed-by: David Vrabel Cc: Ian Campbell Cc: Jason Luan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX

2013-11-13T03:01:48Z

commit d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa upstream. In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: Lothar Waßmann Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8192cu: Fix error in pointer arithmetic

2013-11-13T03:01:48Z

commit 9473ca6e920a3b9ca902753ce52833657f9221cc upstream. An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland Signed-off-by: Larry Finger Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

davinci_emac.c: Fix IFF_ALLMULTI setup

2013-11-04T12:23:41Z

[ Upstream commit d69e0f7ea95fef8059251325a79c004bac01f018 ] When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier Acked-by: Mugunthan V N Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

wanxl: fix info leak in ioctl

2013-11-04T12:23:41Z

[ Upstream commit 2b13d06c9584b4eb773f1e80bbaedab9a1c344e1 ] The wanxl_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnx2x: record rx queue for LRO packets

2013-11-04T12:23:41Z

[ Upstream commit 60e66fee56b2256dcb1dc2ea1b2ddcb6e273857d ] RPS support is kind of broken on bnx2x, because only non LRO packets get proper rx queue information. This triggers reorders, as it seems bnx2x like to generate a non LRO packet for segment including TCP PUSH flag : (this might be pure coincidence, but all the reorders I've seen involve segments with a PUSH) 11:13:34.335847 IP A > B: . 415808:447136(31328) ack 1 win 457 11:13:34.335992 IP A > B: . 447136:448560(1424) ack 1 win 457 11:13:34.336391 IP A > B: . 448560:479888(31328) ack 1 win 457 11:13:34.336425 IP A > B: P 511216:512640(1424) ack 1 win 457 11:13:34.336423 IP A > B: . 479888:511216(31328) ack 1 win 457 11:13:34.336924 IP A > B: . 512640:543968(31328) ack 1 win 457 11:13:34.336963 IP A > B: . 543968:575296(31328) ack 1 win 457 We must call skb_record_rx_queue() to properly give to RPS (and more generally for TX queue selection on forward path) the receive queue information. Similar fix is needed for skb_mark_napi_id(), but will be handled in a separate patch to ease stable backports. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eilon Greenstein Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

farsync: fix info leak in ioctl

2013-11-04T12:23:41Z

[ Upstream commit 96b340406724d87e4621284ebac5e059d67b2194 ] The fst_get_iface() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

can: dev: fix nlmsg size calculation in can_get_size()

2013-11-04T12:23:40Z

[ Upstream commit fe119a05f8ca481623a8d02efcc984332e612528 ] This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mv643xx_eth: fix orphaned statistics timer crash

2013-11-04T12:23:40Z

[ Upstream commit f564412c935111c583b787bcc18157377b208e2e ] The periodic statistics timer gets started at port _probe() time, but is stopped on _stop() only. In a modular environment, this can cause the timer to access already deallocated memory, if the module is unloaded without starting the eth device. To fix this, we add the timer right before the port is started, instead of at _probe() time. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mv643xx_eth: update statistics timer from timer context only

2013-11-04T12:23:40Z

[ Upstream commit 041b4ddb84989f06ff1df0ca869b950f1ee3cb1c ] Each port driver installs a periodic timer to update port statistics by calling mib_counters_update. As mib_counters_update is also called from non-timer context, we should not reschedule the timer there but rather move it to timer-only context. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman